journal article·2022-06-16Open access

Energy Dissipation and Stress Equilibrium Behavior of Granite under Dynamic Impact

Zhenyang Xu, Yixuan Wu, Xin Liu, Lianjun Guo, Zhihang Hu

Applied Sciences· Volume 12· Issue 12

Abstract

Stress equilibrium time is an important index to judge the homogeneity of rocks. In order to study the relationship between stress equilibrium time and crushing energy consumption before rock destruction, Hopkinson tests were conducted on granite specimens with different length-to-diameter ratios. In this paper, by studying the size and strain rate effects of rocks, five different sizes of granite specimens with different aspect ratios were prepared and Hopkinson impact tests were conducted under four strain rate conditions. Data analysis and processing using the three-wave method to investigate the stress uniformity of granite specimens under impact loading. The energy balance factor was introduced to compare and analyze the stress equilibrium time of five kinds of long-diameter granite specimens, and it was found that the stress equilibrium time of rocks with the same length–diameter ratio decreased with the increase of loading strain rate, while the granite specimens with length–diameter ratio of 0.8 showed a better stress equilibrium time. In order to better find the aspect ratio and loading strain rate that can crush better and maintain a long equilibrium time, the energy consumption of rock crushing is further analyzed. The energy dissipation of granite specimens with loading strain rate of 156.8 s−1 and 253.2 s−1 was found to be more concentrated, and the energy dissipation rate was stable at about 48%. Subsequently, the relationship between stress equilibrium time and energy dissipation was established, and it was proved that the fastest growing time period of the energy dissipation curve was approximately equal to the rock stress equilibrium time, while the length-to-diameter ratio of the granite specimen that could better maintain the stress uniformity before rock crushing was 0.8 and the loading strain rate was 156.8 s−1.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Rock Mechanics and Modeling · Geotechnical and Geomechanical Engineering · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mining Engineering, University of Science and Technology Liaoning, Anshan 114051, China

Engineering and Technology Research Center of High-Efficiency Mining-Processing and Utilization of Metal Mineral Resources, Anshan 114051, China

School of Architecture and Civil Engineering, Shenyang University of Technology, Shenyang 110870, China

Chengyuan Mining Development Co., Ltd., Shenyang 110870, China

Funding

National Natural Science Foundation of China (NSFC)—Study on the energy dissipation mechanism of rock impact crushing based on fine features

References (21)

Show source-provided references
1. A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock Materials10.1007/s00603-013-0463-y ↗
2. Some Fundamental Issues in Dynamic Compression and Tension Tests of Rocks Using Split Hopkinson Pressure Bar10.1007/s00603-010-0091-8 ↗
3. Dynamic response of glass under low-velocity impact and high strain-rate SHPB compression loading10.1016/j.jnoncrysol.2015.10.043 ↗
4. Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique10.1016/j.conbuildmat.2017.03.185 ↗
5. Impact characterization and modelling of cement and asphalt mortar based on SHPB experiments10.1016/j.ijimpeng.2017.03.009 ↗
6. Dynamic triaxial compression tests on sandstone at high strain rates and low confining pressures with split Hopkinson pressure bar10.1016/j.ijrmms.2018.12.005 ↗
7. High-strain rate compressive behavior of CFRP confined concrete: Large diameter SHPB tests10.1016/j.conbuildmat.2018.12.144 ↗
8. Experimental Study on Stress Uniformity and Deformation Behavior of Coals with Different Length-to-Diameter Ratios under Dynamic Compression10.1155/2021/6675200 ↗
9. Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests10.1016/j.dt.2021.05.003 ↗
10. Theoretical analysis and experimental research on the energy dissipation of rock crushing based on fractal theory10.1016/j.jngse.2016.05.020 ↗
11. Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method10.1007/s00603-013-0484-6 ↗
12. Wang, J., Ma, L., Zhao, F., Lv, B., Gong, W., He, M., and Liu, P. (2022). Dynamic Strain Field for Granite Specimen under SHPB Impact Tests Based on Stress Wave Propagation. Undergr. Space, 2467–9674.10.1016/j.undsp.2021.11.010 ↗
13. Advances in experimental studies for deep rock dynamics
14. Song, L., and Hu, S.S. (2005). Two-Wave and Three-Wave Method in SHPB Data Processing, Explosion & Shock Waves.
15. Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials
16. Strain rate effect and energy dissipation characteristics of sandstone in coal measures under impact loading
17. Study on the Rock Size Effect of Quasistatic and Dynamic Compression Characteristics10.1155/2021/9974606 ↗
18. Experimental study on energy dissipation of mudstone in coal mine under im-pact loading
19. Energy dissipation characteristic of magnetite ore crushing under impact load
20. Experimental study for stress uniformity of rock specimen in SHPB test
21. Mechanical behavior and microstructural evolution of a bainite-based quenching-partitioning (BQ&P) steel under high strain rates10.1016/j.msea.2021.141414 ↗