Compressive Strength of Aged Timber Members in Traditional Building: Considering Differences in Heartwood and Sapwood
Source abstract
Abstract
This paper compares the parallel-to-grain compressive strengths of wood sample specimens with defects with those of the associated timber log samples. The Chinese fir (Cunninghamia lanceolata) was examined using the static test method. We analyzed the effects of sampling position along the radial direction of the log sample and the age of timber on the parallel-to-grain compressive strength. We then developed time-dependent strength models of the heartwood (HW) and sapwood (SW). These models can be used to evaluate the strength of an aged timber member, using only the service duration, without taking material samples. The degradation of compressive strength over time was then analyzed using an existing multivariate time-dependent model that includes the stress level. The failure strength of the HW was found to be close to that of the SW when at low stress levels. The estimates of the compressive strength of timber members based on these models were better than those recommended by the Chinese National Standard.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Bamboo properties and applications · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Chongqing University, Chongqing 400044, China
School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China
Funding
Ministry of Education and the Bureau of Foreign Experts of China · National Natural Science Foundation of China · Chongqing Science and Technology Bureau
References (47)
Show source-provided references
1. Structural analysis and repair of Yingxian wooden tower
2. Time-dependent material behavior applied to timber columns under combined loading. Part I: Creep deformation10.1007/s001070100237 ↗
3. Transient moisture effects on wood creep10.1007/s00226-002-0157-1 ↗
4. Experimental research on mechanical properties of timber in ancient Tibetan building10.1061/(ASCE)MT.1943-5533.0000438 ↗
5. Li, J., Wu, Y., and Ma, Y. (2011). Functional Wood, Science Press.
6. Studies on the durability of wood I: Mechanical properties of aged timbers
7. Studies on the durability of wood III: Mechanical properties of aged timbers
8. Studies on the permanence of wood V, shrinkage and swelling of old timbers about 300–1300 years ago
9. Studies on the permanence of wood VI: The changes of mechanical properties of aged timbers
10. Studies on the permanence of wood IX: The influence of age on the elasticity of wood
11. Studies of Japanese aged timbers
12. Kuipers, J. (1986, January 20). Effect of age and/or load on timber strength. Proceedings of the 19th CIB-W18/19-6-1, Florence, Italy.
13. Strength of aged timber10.1080/09613219108727090 ↗
14. Evaluation of historical construction timber. Density and compression10.1007/BF02628232 ↗
15. Effect of 85 years of service on mechanical properties of timber roof members. Part 1. Experimental observations
16. Strength properties of aged wood I: Tensile strength properties of aged Keyaki and Akamatsu woods
17. Strength properties of aged wood II: Compressive strength properties, shearing strength and hardness of aged keyaki and akamatsu woods
18. Strength properties of aged wood III: Static and impact bending strength properties of aged keyaki and akamatsu woods10.2488/jwrs.51.146 ↗
19. Mechanical characteristics of aged Hinoki wood from Japanese historical buildings10.1016/j.crhy.2009.08.009 ↗
20. Effects of aging on the vibrational properties of wood10.1016/j.culher.2012.02.008 ↗
21. Time-related effects of loading on wood strength: A linear cumulative damage theory
22. A cumulative damage model to predict load duration characteristics of lumber
23. Foschi, R.O., Folz, B.R., and Yao, F.Z. (1989). Reliability-Based Design of Wood Structures, First Folio Printing Corp. Ltd.
24. Zhuang, X. (2004). Reliability Study of North American Chinese Timber Structures Design Code. [Master’s Thesis, The University of British Columbia].
25. Ranta Maunus, A., Fonselius, M., Kurkela, J., and Toratti, T. (2001). Reliability analysis of timber structures. VTT Research Notes 2109, VTT Technical Research Centre of Finland.
26. Grading of softwood lumber using non-destructive techniques10.1016/j.jmatprotec.2007.12.105 ↗
27. (2003). Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber (Standard No. ASTM D 6570-00).
28. (2005). 2005 Timber Structures-Strength Graded Structural Timber with Rectangular Cross Section-Part 2: Machine grading; Additional Requirements for Initial Type Testing (Standard No. BS EN 14081-2).
29. Hygrothermal effects on load-duration behavior of structural lumber10.1061/(ASCE)0733-9445(1992)118:4(1023) ↗
30. Advances in the knowledge of the influence of moisture changes on the long-term mechanical performance of timber structures10.1007/BF02481695 ↗
31. (1992). Testing Methods for Physical and Mechanical Properties of Wood (Standard No. GB 1927-1943-91).
32. (2009). China National Standardization Management Committee. General Requirements for Physical and Mechanical Tests of Wood (Standard No. GB/T 2009).
33. Mechanical properties and set recovery of compressed poplar with glycerin pretreatment10.37763/wr.1336-4561/65.2.293302 ↗
34. Influence of welded depth and CuCl2 pretreated dowels on wood dowel welding10.1007/s10086-017-1644-1 ↗
35. (2005). Handbook of Timber Structure Design, China Architecture and Building Press.
36. Wang, X. (2008). Research on Evaluation Method of Reliability-Based Residual Life of Historic Timber Structure. [Ph.D. Thesis, Wuhan University of Technology].
37. Reliability-based calibration of load duration factors for timber structures10.1016/j.strusafe.2004.10.001 ↗
38. Li, T. (2004). The Main Structural Damages and Damage Mechanism Analysis on Yingxian Wooden Tower. [Ph.D. Thesis, Taiyuan University of Technology].
39. Strength degradation and service life prediction of timber in ancient Tibetan building10.1007/s00107-017-1211-x ↗
40. Survey of tree species for wood materials used in historical buildings and analysis of their mechanical properties
41. Note on examination of an aged timber specimen10.1007/BF02617785 ↗
42. Examination of aged timbers–Part III: Aged Pterocarpus specimen from tirupathi10.1007/BF02618130 ↗
43. Properties of a spruce beam after 300 years in roof construction
44. Researches on timber material changing which affect buildings form in ancient architecture construction
45. Huang, R., Jin, H., Shi, Z., Xia, R., Li, H., and Liu, X. (2007, January 19). Study on physico-mechanical properties of ancient architecture of the palace museum. Proceedings of the First National Symposium on Biomass Materials Science and Technology, Beijing, China.
46. New method of aging for historic timber structure buildings
47. Cheng, J., Yang, J., and Liu, P. (1992). China Wood Record, China Forestry Press.