journal article·2022-08-24Open access

Radiation Damage of Polydimethylsiloxane and Polyimide by X-ray Free-Electron Laser

Keondo Lee, Donghyeon Lee, Sangwon Baek, Jihan Kim, Jaehyun Park, Sang Jae Lee, Sehan Park, Jangwoo Kim, Jong-Lam Lee, Wan Kyun Chung, Yunje Cho, Ki Hyun Nam

Applied Sciences· Volume 12· Issue 17

Abstract

A crystal delivery system is essential in serial femtosecond crystallography experiments using an X-ray free-electron laser (XFEL). Investigating the XFEL-induced radiation damage to materials potentially applicable to sample delivery devices is vital for developing a sample delivery system. In this study, we investigated the radiation damage caused by an XFEL to polydimethylsiloxane (PDMS) and polyimide (PI), which are widely used as sample delivery materials in synchrotron X-rays. Upon XFEL exposure, the PDMS film produced irregularly shaped and sized holes, whereas the PI film produced relatively regular shaped and sized holes. When XFELs were exposed to the channel of the PDMS-based microfluidic device, holes were generated on the film by the radiation damage and the microfluidic device and the internal channel region were structurally destroyed. The PI-based microfluidic device experienced no structural destruction, except for the holes generated by the XFEL. However, as the XFELs were continuously exposed, bubbles generated from the solution due to radiation damage; the accumulation of these bubbles interfered with the path of the inner channel of the microfluidic device. Our results will not only help understand the phenomenon of radiation damage of PDMS and PI films by XFEL, but also provide insight into the directions to pursue in developing applications of PDMS and PI films in XFEL studies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced X-ray Imaging Techniques · Advanced Electron Microscopy Techniques and Applications · Enzyme Structure and Function

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang 37673, Korea

Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 37673, Korea

Department of Life Science, Pohang University of Science and Technology, Pohang 37673, Korea

Pohang Accelerator Laboratory, Pohang University of Science and Technology, Pohang 37673, Korea

Department of Chemical Engineering, Pohang University of Science and Technology, Pohang 37673, Korea

POSTECH Biotech Center, Pohang University of Science and Technology, Pohang 37673, Korea

Funding

National Research Foundation of Korea (NRF)

References (59)

Show source-provided references
1. Nam, K.H. (2021). Molecular dynamics-From small molecules to macromolecules. Int. J. Mol. Sci., 22.10.3390/ijms22073761 ↗
2. Femtosecond X-ray protein nanocrystallography10.1038/nature09750 ↗
3. High-resolution protein structure determination by serial femtosecond crystallography10.1126/science.1217737 ↗
4. Near-physiological-temperature serial crystallography reveals conformations of SARS-CoV-2 main protease active site for improved drug repurposing10.1016/j.str.2021.07.007 ↗
5. Nam, K.H. (2021). Room-temperature structure of xylitol-bound glucose isomerase by serial crystallography: Xylitol binding in the M1 site induces release of metal bound in the M2 site. Int. J. Mol. Sci., 22.10.3390/ijms22083892 ↗
6. Time-resolved serial crystallography captures high-resolution intermediates of photoactive yellow protein10.1126/science.1259357 ↗
7. Schmidt, M. (2019). Time-resolved macromolecular crystallography at pulsed X-ray sources. Int. J. Mol. Sci., 20.10.3390/ijms20061401 ↗
8. Time-resolved serial femtosecond crystallography at the European XFEL10.1038/s41592-019-0628-z ↗
9. Sample delivery for serial crystallography at free-electron lasers and synchrotrons10.1107/S205979831801567X ↗
10. A guide to sample delivery systems for serial crystallography10.1111/febs.15099 ↗
11. Nam, K.H. (2019). Sample delivery media for serial crystallography. Int. J. Mol. Sci., 20.10.3390/ijms20051094 ↗
12. Gas dynamic virtual nozzle for generation of microscopic droplet streams10.1088/0022-3727/41/19/195505 ↗
13. Lipidic cubic phase injector facilitates membrane protein serial femtosecond crystallography10.1038/ncomms4309 ↗
14. Microfluidic polyimide gas dynamic virtual nozzles for serial crystallography10.1063/5.0012806 ↗
15. Grease matrix as a versatile carrier of proteins for serial crystallography10.1038/nmeth.3172 ↗
16. The serial millisecond crystallography instrument at the Australian Synchrotron incorporating the “Lipidico” injector10.1063/1.5104298 ↗
17. Sample delivery using viscous media, a syringe and a syringe pump for serial crystallography10.1107/S160057751900897X ↗
18. Nam, K.H. (2020). Polysaccharide-based injection matrix for serial crystallography. Int. J. Mol. Sci., 21.10.3390/ijms21093332 ↗
19. Shortening injection matrix for serial crystallography10.1038/s41598-019-56135-1 ↗
20. Nam, K.H. (2020). Lard injection matrix for serial crystallography. Int. J. Mol. Sci., 21.10.3390/ijms21175977 ↗
21. Beef tallow injection matrix for serial crystallography10.1038/s41598-021-04714-6 ↗
22. Fixed-target protein serial microcrystallography with an x-ray free electron laser10.1038/srep06026 ↗
23. Goniometer-based femtosecond crystallography with X-ray free electron lasers10.1073/pnas.1418733111 ↗
24. Fixed target matrix for femtosecond time-resolved and in situ serial micro-crystallography10.1063/1.4928706 ↗
25. Nylon mesh-based sample holder for fixed-target serial femtosecond crystallography10.1038/s41598-019-43485-z ↗
26. 1 kHz fixed-target serial crystallography using a multilayer monochromator and an integrating pixel detector10.1107/S205225251900914X ↗
27. Viscous-medium-based crystal support in a sample holder for fixed-target serial femtosecond crystallography10.1107/S1600576720008663 ↗
28. Application of a high-throughput microcrystal delivery system to serial femtosecond crystallography10.1107/S1600576720002423 ↗
29. Room-temperature macromolecular serial crystallography using synchrotron radiation10.1107/S2052252514010070 ↗
30. Stable sample delivery in viscous media via a capillary for serial crystallography10.1107/S1600576719014985 ↗
31. A microfluidic flow-focusing device for low sample consumption serial synchrotron crystallography experiments in liquid flow10.1107/S1600577519000304 ↗
32. 3D-MiXD: 3D-printed X-ray-compatible microfluidic devices for rapid, low-consumption serial synchrotron crystallography data collection in flow10.1107/S2052252519016865 ↗
33. Segmented flow generator for serial crystallography at the European X-ray free electron laser10.1038/s41467-020-18156-7 ↗
34. Stable sample delivery in a viscous medium via a polyimide-based single-channel microfluidic chip for serial crystallography10.1107/S1600576721005720 ↗
35. An on-demand, drop-on-drop method for studying enzyme catalysis by serial crystallography10.1038/s41467-021-24757-7 ↗
36. A novel inert crystal delivery medium for serial femtosecond crystallography10.1107/S2052252515009811 ↗
37. Combination of an inject-and-transfer system for serial femtosecond crystallography10.1107/S1600576722005556 ↗
38. Crystallography on a chip—Without the chip: Sheet-on-sheet sandwich10.1107/S2059798318011634 ↗
39. Jothi, L., and Nageswaran, G. (2019). Plasma modified polymeric materials for biosensors/biodevice applications. Non-Thermal Plasma Technology for Polymeric Materials, Elsevier.10.1016/B978-0-12-813152-7.00015-9 ↗
40. Enhanced cytocompatibility and reduced genotoxicity of polydimethylsiloxane modified by plasma immersion ion implantation10.1016/j.colsurfb.2016.08.057 ↗
41. Haeberle, S., and Zengerle, R. (2008). Microfluidic for Lab-on-a-Chip. Comprehensive Microsystems, Elesevier Science.10.1016/B978-044452190-3.00038-0 ↗
42. Microfluidic liquid jet system with compatibility for atmospheric and high-vacuum conditions10.1039/C3LC51363G ↗
43. The PDMS-based microfluidic channel fabricated by synchrotron radiation stimulated etching10.1364/OE.18.009733 ↗
44. Applications of polyimide coatings: A review10.1007/s42452-021-04362-5 ↗
45. Constantin, C.P., Aflori, M., Damian, R.F., and Rusu, R.D. (2019). Biocompatibility of polyimides: A mini-review. Materials, 12.10.3390/ma12193166 ↗
46. Polyimide mesh-based sample holder with irregular crystal mounting holes for fixed-target serial crystallography10.1038/s41598-021-92687-x ↗
47. Park, S.Y., Choi, H., Eo, C., Cho, Y., and Nam, K.H. (2020). Fixed-target serial synchrotron crystallography using nylon mesh and enclosed film-based sample holder. Crystals, 10.10.3390/cryst10090803 ↗
48. Microfabricated mounts for high-throughput macromolecular cryocrystallography10.1107/S0021889803018375 ↗
49. Simple push coating of polymer thin-film transistors10.1038/ncomms2190 ↗
50. Fabrication of microfluidic devices using polydimethylsiloxane10.1063/1.3259624 ↗
51. Fabrication of polyimide microfluidic devices by laser ablation based additive manufacturing10.1007/s00542-019-04698-4 ↗
52. Current status of the CXI beamline at the PAL-XFEL10.3938/jkps.69.1089 ↗
53. Hard X-ray free-electron laser with femtosecond-scale timing jitter10.1038/s41566-017-0029-8 ↗
54. Focusing X-ray free-electron laser pulses using Kirkpatrick-Baez mirrors at the NCI hutch of the PAL-XFEL10.1107/S1600577517016186 ↗
55. Mix and inject: Reaction initiation by diffusion for time-resolved macromolecular crystallography10.1155/2013/167276 ↗
56. Mixing injector enables time-resolved crystallography with high hit rate at X-ray free electron lasers10.1063/1.4961971 ↗
57. Microfluidic mixing injector holder enables routine structural enzymology measurements with mix-and-inject serial crystallography using X-ray free electron lasers10.1021/acs.analchem.9b00311 ↗
58. Ultracompact 3D microfluidics for time-resolved structural biology10.1038/s41467-020-14434-6 ↗
59. Investigation of ablation thresholds of optical materials using 1-µm-focusing beam at hard X-ray free electron laser10.1364/OE.21.015382 ↗