journal article·2022-12-14Open access

Future Definition and Extraction of the Blast Furnace 3D Burden Surface Based on Intelligent Algorithms

Shaolun Sun, Zejun Yu, Sen Zhang, Wendong Xiao

Applied Sciences· Volume 12· Issue 24

Abstract

The accurate identification of the shape of the blast furnace (BF) burden surface is a crucial factor in the fault diagnosis of the BF condition and guides the charge operation. Based on the BF 3D point cloud data of phased array radar, this paper proposes a 3D burden surface feature definition system. Based on expert experience, the feature parameters of the burden surface are extracted. The voxel feature was extracted based on improved BNVGG. The optimized PointCNN extracts the point cloud features. The features of the burden surface were defined from three perspectives: the surface shape, voxel, and point cloud. The research of the 2D burden line is extended to the 3D burden surface, and the assumption of the symmetry of the BF is eliminated. Finally, the accuracy of the burden surface classification under each feature was evaluated, and the effectiveness of each feature extraction algorithm was verified. The experimental results show that the shape feature defined based on expert experience affects the recognition of the burden surface. However, it is defined from the data perspective and cannot accurately identify a similar burden surface shape. Therefore, the voxel features and point cloud features of the burden surface were extracted, improving the identification accuracy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced X-ray and CT Imaging · Iron and Steelmaking Processes · Mineral Processing and Grinding

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Knowledge Automation for Industrial Processes, Ministry of Education, School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing 100083, China

School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing 100083, China

Shunde Innovation School, University of Science and Technology Beijing, Foshan 528399, China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Beijing Municipality

References (25)

Show source-provided references
1. Precise Burden Charging Operation During Iron-Making Process in Blast Furnace10.1109/ACCESS.2021.3064885 ↗
2. Review of green and low-carbon ironmaking technology10.1080/03019233.2019.1639029 ↗
3. BLASTDAR—A large radar sensor array system for blast furnace burden surface imaging10.1109/JSEN.2015.2445494 ↗
4. Xu, T., Chen, Z., Jiang, Z., Huang, J., and Gui, W. (2020). A real-time 3D measurement system for the blast furnace burden surface using high-temperature industrial endoscope. Sensors, 20.10.3390/s20030869 ↗
5. Modeling of high temperature gas flow 3D distribution in BF throat based on the computational fluid dynamics10.20965/jaciii.2015.p0269 ↗
6. Data-driven multiobjective optimization for burden surface in blast furnace with feedback compensation10.1109/TII.2019.2908989 ↗
7. A blast furnace burden surface deeplearning detection system based on radar spectrum restructured by entropy weight10.1109/JSEN.2020.3045973 ↗
8. The Law of Blast Furnace
9. Multi-point radar detection method to reconstruct the shape of blast furnace material line
10. Burden distribution calculation of bell-less top of blast furnace based on multi-radar data10.1016/S1006-706X(13)60108-9 ↗
11. Estimation of stack profile of burden at peripheral zone of blast furnace top10.2355/isijinternational.43.620 ↗
12. Research and Practice of Burden Distribution in BF
13. Blast furnace material surface feature extraction and cluster analysis
14. Ding, X., Zhang, X., Ma, N., Han, J., Ding, G., and Sun, J. (2021, January 20–25). Repvgg: Making vgg-style convnets great again. Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition, Nashville, TN, USA.10.1109/CVPR46437.2021.01352 ↗
15. Li, Y., Bu, R., Sun, M., Wu, W., Di, X., and Chen, B. (2018, January 3–8). Pointcnn: Convolution on x-transformed points. Proceedings of the Advances in Neural Information Processing Systems, Montréal, QC, Canada.
16. Blast furnace gas flow strength prediction using FMCW radar10.2355/isijinternational.55.600 ↗
17. Burden Profile Measurement System for Blast Furnaces Using Phased Array Radar
18. Sun, S.S., Yu, Z.J., Zhang, S., Xiao, W.D., and Yang, Y.L. (2022). Reconstruction and classification of 3D burden surfaces based on two model drived data fusion. Expert Syst. Appl., 119406.10.1016/j.eswa.2022.119406 ↗
19. Simonyan, K., and Zisserman, A. (2014). Very deep convolutional networks for large-scale image recognition. arXiv.
20. Santurkar, S., Tsipras, D., Ilyas, A., and Madry, A. (2018, January 3–8). How does batch normalization help optimization?. Proceedings of the Advances in Neural Information Processing Systems, Montréal, QC, Canada.
21. Charles, R.Q., Su, H., Kaichun, M., and Guibas, L.J. (2017, January 21–26). Pointnet: Deep learning on point sets for 3d classification and segmentation. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, Honolulu, HI, USA.10.1109/CVPR.2017.16 ↗
22. He, K., Zhang, X., Ren, S., and Sun, J. (2016, January 27–30). Deep residual learning for image recognition. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition, Las Vegas, NV, USA.10.1109/CVPR.2016.90 ↗
23. Imagenet classification with deep convolutional neural networks10.1145/3065386 ↗
24. A well-trained artificial neural network for predicting the rheological behavior of MWCNT–Al2O3 (30–70%)/oil SAE40 hybrid nanofluid10.1038/s41598-021-96808-4 ↗
25. A well-trained feed-forward perceptron Artificial Neural Network (ANN) for prediction the dynamic viscosity of Al2O3–MWCNT (40:60)-Oil SAE50 hybrid nano-lubricant at different volume fraction of nanoparticles, temperatures, and shear rates10.1016/j.icheatmasstransfer.2021.105624 ↗