A New Technique for Determining the Shape of a Paper Sample in In-Plane Compression Test Using Image Sequence Analysis
Source abstract
Abstract
The article presents a new technique for analyzing phenomena occurring during the measurement of the strength properties of paper in the conditions of compression of the tested samples with forces acting in the paper plane. The technique is based on collecting data on the current distance of the clamps holding the tested sample and the force exerted on the sample using a universal testing machine and on the simultaneous recording of image sequence of the sample during the measurement. Next, the resulting images are subjected to processing and analysis, the purpose of which is to extract information about the shape of the sample edge in all phases of the measurement. Its advantage is the ability to determine the deflection arrow of the sample and describe its shape using the selected function given by the analytical parametric formula. It will be helpful in further research on the development of an analytical model describing the phenomena occurring during paper compression, and a method to determine the mechanism of paper destruction and the corresponding maximum force that destroys a paper sample.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Textile materials and evaluations · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre of Papermaking and Printing, Lodz University of Technology, Wólczańska 221, 95-003 Łódź, Poland
Department of Strength of Materials, Lodz University of Technology, Stefanowskiego 1/15, 90-537 Łódź, Poland
References (26)
Show source-provided references
1. Rzepa, S. (2004, January 1–2). Parametry papieru. Proceedings of the Sympozjum Mondi Packaging “From Fibre to Corrugated Board”, Świecie, Poland.
2. Quasi-static axial crushing of single wall corrugated paperboard10.1016/j.compstruct.2019.111237 ↗
3. Paperboard tubes failure due to lateral compression—Experimental and numerical study10.1016/j.compstruct.2018.07.027 ↗
4. New method for evaluation of radial crush strength of paper cores
5. Gajewski, T., Garbowski, T., Staszak, N., and Kuca, M. (2021). Crushing of double-walled corrugated board and its influence on the load capacity of various boxes. Energies, 14.10.20944/preprints202105.0667.v1 ↗
6. Plateau stress of paper honeycomb as response to various relative humidities10.1002/pts.890 ↗
7. Analytic homogenization for torsion of orthotropic sandwich plates: Application to corrugated cardboard10.1016/j.compstruct.2009.09.020 ↗
8. Properties of commercial Kraft paper honeycomb furniture stock panels conditioned under 65 and 95 percent relative humidity
9. Kmita-Fudalej, G., Szewczyk, W., and Kołakowski, Z. (2020). Calculation of honeycomb paperboard resistance to edge crush test. Materials, 13.10.3390/ma13071706 ↗
10. Application of finite element analysis to predict the mechanical strength of ventilated corrugated paperboard packaging for handling fresh produce10.1016/j.biosystemseng.2018.07.014 ↗
11. Mathematical models for predicting the quasi-static stress characteristics of corrugated paperboard with sinusoidal core along the longitudinal compression10.1016/j.ijmecsci.2018.07.028 ↗
12. Local buckling and post-buckling of composite channel-section beams—Numerical and experimental investigations10.1016/j.compositesb.2016.01.053 ↗
13. Evaluation of in-plane compressive densification strain of honeycomb paperboard10.1177/1687814020913424 ↗
14. Smardzewski, J., and Prekrat, S. (2012, January 12). Modelling of thin paper honeycomb panels for furniture. Proceedings of the International Conference Ambienta, Wood is Good—With Knowledge and Technology to a CompetitiveForestry and Wood Technology Sector, Zagreb, Croatia.
15. (2011). Tektura Falista Oznaczanie Odporności na Zgniatanie Płaskie (Standard No. PN-EN ISO 3035: 2011). (Polish Standard).
16. Some basic plastic mechanism in the local buckling of thin-walled steel structures10.1016/0020-7403(81)90008-4 ↗
17. Królak, M. (1990). Stany Zakrytyczne i Nośność Graniczna Cienkościennych Dźwigarów o Ścianach Płaskich (Critical States and Ultimate Capacity of Thin-Walled Girders with Flat Walls), PWN, Warszawa-Łódź.
18. Reddy, J.N. (2004). Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press. [2nd ed.].10.1201/b12409 ↗
19. Bin Kamarudin, M.N., Mohamed Ali, J.S., Aabid, A., and Ibrahim, Y.E. (2022). Buckling Analysis of a Thin-Walled Structure Using Finite Element Method and Design of Experiments. Aerospace, 9.10.3390/aerospace9100541 ↗
20. Gonzalez, R.C., and Woods, R.E. (2007). Digital Image Processing, Prentice Hall, SE. [3rd ed.].
21. Single-Camera System for Measuring Paper Deformations Based on Image Analysis
22. Considine, J.M., Scott, C.T., Gleisner, R., and Zhu, J.Y. (2005, January 11–16). Use of digital image correlation to study the local deformation field of paper and paperboard. Proceedings of the 13th Fundamental Research Symposium, Cambridge, UK.
23. Improved image-based deformation measurement for geotechnical applications10.1139/cgj-2015-0253 ↗
24. (2023, January 07). Online; Procemex Machine Vision Applications in Pulp and Paper Industry Offer Different Solutions for Pulp Furnish, Pulp bale, and Roll Quality Inspection. Available online: https://www.procemex.com/machine-vision-applications.
25. Volmir, A.S. (1972). Nonlinear Dynamics of Plates and Shells, Science Publishing House. (In Russian).
26. Kolakowski, Z., and Jankowski, J. (2021). Some inconsistencies in the nonlinear buckling plate theories—FSDT, S-FSDT, HSDT. Materials, 14.10.3390/ma14092154 ↗