journal article·2023-02-09Open access

Seismic Performance of Ductile Column with Rectangular Hollow Cross-Section in RC Building

Kiwoong Jin, Kaede Yamazaki, Ryo Takahashi

Applied Sciences· Volume 13· Issue 4

Abstract

In order to reduce the self-weight of RC buildings and increase cost-savings, the seismic performance of rectangular hollow sectioned columns was investigated by experimental and analytical studies. Cyclic loading tests were carried out under compression axial force ratios from 0.16 to 0.3, and hysteresis curves, failure patterns, strain distributions of reinforcement, flexural and shear deformations, and energy absorption capacity were discussed in detail. Based on the experiments, under an axial force ratio of 0.16, the structural performances between hollow and solid sectioned columns were found to be almost equivalent. When the axial force ratio increased to 0.3, the structural performance was almost the same until the 2.0% drift angle; however, sudden deterioration of the load-bearing capacity occurred, with concrete compressive failure at the plastic hinge region near the column end. By means of numerical investigations by cross-sectional and FEM analysis, it was found that such brittle failure was induced by the neutral axis location and the concrete stress concentration on the hollow cross-section. Therefore, the appropriate separation of the hollow section from the plastic hinge region is recommended when the neutral axis is located beyond the flange at the ultimate flexural state.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Architecture, School of Science and Technology, Meiji University, Kawasaki-shi 214-8517, Kanagawa, Japan

References (35)

Show source-provided references
1. Quasistatic test for seismic performance of circular hollow RC bridge pier
2. Seismic Performance of Circular Hollow RC Bridge Columns
3. Seismic performance and the strengthening of hollow circular RC piers having reinforced cut-off planes and variable wall thickness10.3151/crt1990.10.1_13 ↗
4. Ranzo, G., and Priestley, M.J.N. (February, January 30). Seismic performance of large RC circular hollow columns. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
5. Improvement of seismic detailing of bridge columns with hollow sections
6. Whittaker, D., Park, R., and Carr, A.J. (1987, January 5–8). Experimental tests on hollow circular concrete columns for use in offshore concrete platforms. Proceedings of the Pacific Conference on Earthquake Engineering, Wairakei, New Zealand.
7. Seismic performance of hollow circular bridge piers
8. Won, D., Kim, S., Seo, J., and Kang, Y.J. (2019). Experimental study of composite hollow RC column under uniaxial compressive load. Appl. Sci., 9.10.3390/app9030373 ↗
9. Effects of confinement in circular hollow concrete columns10.1061/(ASCE)ST.1943-541X.0002151 ↗
10. Experimental and numerical studies on the seismic response of RC hollow bridge piers10.1007/s10518-005-2240-0 ↗
11. Experimental study of hollow rectangular bridge column performance under vertical and cyclically bilateral loads10.1007/s11803-013-0184-y ↗
12. Behavior of ductile hollow reinforced concrete columns
13. Cyclic tests on large-scale models of existing bridge piers with rectangular hollow cross-section10.1002/eqe.311 ↗
14. Shake table test for reinforced concrete hollow rectangular pier
15. Shaking Table Test Study on Seismic Performance of Hollow Rectangular Piers10.1155/2019/7508759 ↗
16. Seismic performance of hollow high-strength concrete bridge columns10.1061/(ASCE)1084-0702(2002)7:6(338) ↗
17. Full-scale tests on rectangular hollow bridge piers10.1007/BF02482111 ↗
18. Seismic performance of rectangular hollow bridge columns10.1061/(ASCE)0733-9445(2002)128:1(60) ↗
19. Kim, S., Hong, H., and Han, T. (2021). Behavior of an internally confined hollow reinforced concrete column with a polygonal cross-section. Appl. Sci., 11.10.3390/app11094302 ↗
20. Martínez-Martín, F., Yepes, V., González-Vidosa, F., Hospitaler, A., and Alcalá, J. (2022). Optimization design of RC elevated water tanks under seismic loads. Appl. Sci., 12.10.3390/app12115635 ↗
21. Damage control design of flexible RC tall building using high-strength materials10.3130/aijt.7.73_2 ↗
22. Estimation of bending rigidity and stress concentration of circular hole void slab
23. Durability improvement for autoclaved aerated concrete (AAC): Development of high carbonation-resistant AAC10.3130/aijt.5.33_2 ↗
24. Architectural Institute of Japan (AIJ) (2018). AIJ Standard for Structural Calculation of Reinforced Concrete Structures, Architectural Institute of Japan.
25. A Numerical Approach to the Complete Stress-Strain Curve of Concrete10.1016/0008-8846(73)90096-3 ↗
26. ITOCHU Techno-Solutions Corporation (2019). Concrete Structures Non-Linear Finite Element Analysis Program FINAL ver.11, ITOCHU Techno-Solutions Corporation. (In Japanese).
27. An analytical model for reinforced concrete panels under cyclic stresses10.3130/aijs.65.135_4 ↗
28. Complete Triaxial Stress-Strain Curve for Concrete10.1061/JSDEAG.0005921 ↗
29. Stress-strain relationship for concrete under triaxial compression10.3130/aijs.60.163_2 ↗
30. Compressive Fracture Energy and Fracture Zone Length of Concrete
31. A failure criterion for concrete
32. Izumo, J., Shima, H., and Okamura, H. (1987, January 1–3). Analytical model for reinforced concrete panel elements subjected to in-plane forces. Proceedings of the Japan Concrete Institute, Tokyo, Japan. (In Japanese).
33. Ciampi, V., Eligehausen, R., Bertero, V.V., and Popov, E.P. (1982). Analytical Model for Concrete Anchorages of Reinforcing Bars under Generalized Excitations, University of Berkeley. Report NO. UCB/EERC-82/23.
34. Naganuma, K., Yonezawa, K., Kurimoto, O., and Eto, H. (2004, January 1–6). Simulation of nonlinear dynamic response of reinforced concrete scaled model using three-dimensional finite element method. Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada.
35. Architectural Institute of Japan (AIJ) (1999). Design Guidelines for Earthquake Resistant Reinforced Concrete Buildings Based on Inelastic Displacement Concept, Architectural Institute of Japan.