Wetting of Cu-SiC Composite Material Modified by Nanosecond Laser Radiation and Liquid Spreading over It
Source abstract
Abstract
In the framework of this work, the surface properties of Cu-SiC composite material were studied when spreading micro- and nanoliter liquids. The Cu-SiC samples with a SiC content of 5 to 20 wt.% were fabricated by spark plasma sintering at temperatures from 700 to 850 °C. The Cu-SiC surfaces were processed by two different methods: using abrasive materials and nanosecond laser radiation. Surface analysis was performed by scanning electron microscopy, profilometry, energy dispersive spectroscopy and Vickers methods. The surface properties (wetting and dynamic characteristics of spreading) were studied using a shadow optical technique when interacting the Cu-SiC surfaces with water (up to 10 μL). It was proved that the recorded deterioration of the wettability properties of Cu-SiC surfaces processed by abrasive materials with an increase in their sintering temperature and the reason for the spontaneous hydrophobization of the Cu-SiC composite materials modified by nanosecond laser radiation, are due to the adsorption of airborne hydrocarbon contaminants, similar to the known wetting inversion of metal surfaces. It was established that the wetting properties of materials prior to modification by laser radiation do not affect the intensity, duration of stages, and steady-state values of contact angles upon wetting inversion of Cu-SiC composite materials. It was also found that the processing of Cu-SiC surfaces by laser radiation makes it possible to change the dynamic characteristics of the liquid spreading (at a flow rate of 5 μL/min, the liquid front speed is more than three times, and the dynamic contact angles are in the range of 30°).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Diamond and Carbon-based Materials Research · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Energy & Power Engineering, National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
Research School of High-Energy Physics, National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
Funding
Russian Science Foundation
References (56)
Show source-provided references
1. Bukhari, M.Z., Brabazon, D., and Hashmi, M.S.J. (September, January 30). Application of Metal Matrix Composite of CuSiC and AlSiC as Electronics Packaging Materials. Proceedings of the 28th International Manufacturing Conference (IMC 28), Dublin City University, Dublin, Ireland.
2. Fabrication of Cu-SiC Composites Using Powder Metallurgy Technique10.1016/j.matpr.2018.10.055 ↗
3. Somani, N., Tyagi, Y.K., and Gupta, N.K. (J. Eng. Des. Technol., 2021). An Investigation on the Influence of Sintering Temperature on Microstructural, Physical and Mechanical Properties of Cu-SiC Composites, J. Eng. Des. Technol., ahead of print.10.1108/JEDT-07-2021-0374 ↗
4. Emelyanenko, K.A., Emelyanenko, A.M., and Boinovich, L.B. (2023). Laser Obtained Superhydrophobic State for Stainless Steel Corrosion Protection, a Review. Coatings, 13.10.3390/coatings13010194 ↗
5. Diamond Detectors with Laser Induced Surface Graphite Electrodes10.1016/j.nima.2016.09.019 ↗
6. Laser Texturing at Interface for Improved Strain Tolerance and Thermal Insulation Performance of Thermal Barrier Coatings10.1016/j.surfcoat.2023.129385 ↗
7. Ignition and Combustion Characteristics of Coal-Water-Oil Slurry Placed on Modified Metal Surface at Mixed Heat Transfer10.1016/j.fuproc.2022.107291 ↗
8. Laser-Assisted Processing of Aluminum Alloy for the Fabrication of Superhydrophobic Coatings Withstanding Multiple Degradation Factors10.1016/j.surfcoat.2020.125993 ↗
9. Surface Texturing of Aluminium Alloy AA2024-T3 by Picosecond Laser: Effect on Wettability and Corrosion Properties10.1016/j.surfcoat.2017.04.056 ↗
10. Anti-Biofouling Superhydrophobic Surface Fabricated by Picosecond Laser Texturing of Stainless Steel10.1016/j.apsusc.2017.12.012 ↗
11. Nagahanumaiah Investigation on Bacterial Adhesion and Colonisation Resistance over Laser-Machined Micro Patterned Surfaces10.1049/mnl.2013.0109 ↗
12. Nanosecond Laser Micro- and Nanotexturing for the Design of a Superhydrophobic Coating Robust against Long-Term Contact with Water, Cavitation, and Abrasion10.1016/j.apsusc.2015.01.202 ↗
13. Römer, G.-W., Arnaldo Del Cerro, D., Sipkema, R.C.J., Groenendijk, M.N.W., and Huis In’t Veld, A.J. (2010, January 2). Ultra Short Pulse Laser Generated Surface Textures for Anti-Ice Applications in Aviation. Proceedings of the ICALEO 2010: 29th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing; Laser Institute of America; Anaheim, CA, USA.10.2351/1.5061570 ↗
14. Multifunctional Surfaces Produced by Femtosecond Laser Pulses10.1063/1.4905616 ↗
15. Häfner, T., Heberle, J., Holder, D., and Schmidt, M. (2015, January 22–25). Adjustment of Surface Energy on Steel Surfaces Due to CLP Generation by Picosecond Laser Processing. Proceedings of the Laser in Manufacturing Conference 2015, Munich, Germany.
16. Patterned Superhydrophobic Metallic Surfaces10.1021/la8037582 ↗
17. Control of the Wetting Properties of an AISI 316L Stainless Steel Surface by Femtosecond Laser-Induced Surface Modification10.1088/0960-1317/22/10/105019 ↗
18. Laser Textured Superhydrophobic Surfaces and Their Applications for Homogeneous Spot Deposition10.1016/j.apsusc.2016.01.019 ↗
19. Wettability of Laser-Textured Copper Surface after a Water-Bath Process10.1063/1.5126173 ↗
20. Droplet Spreading and Wettability of Abrasive Processed Aluminum Alloy Surfaces10.1007/s12540-019-00310-6 ↗
21. Insights into the Wettability Transition of Nanosecond Laser Ablated Surface under Ambient Air Exposure10.1016/j.jcis.2018.08.082 ↗
22. Comment on “Nanosecond Laser Textured Superhydrophobic Metallic Surfaces and Their Chemical Sensing Applications” by Duong V.; Ta, Andrew Dunn, Thomas, J.; Wasley, Robert, W.; Kay, Jonathan Stringer, Patrick, J.; Smith, Colm Connaughton, Jonathan, D. Shephard10.1016/j.apsusc.2016.04.056 ↗
23. Wettability Transition Modes of Aluminum Surfaces with Various Micro/Nanostructures Produced by a Femtosecond Laser10.2351/1.5096076 ↗
24. Nanosecond Laser Textured Superhydrophobic Metallic Surfaces and Their Chemical Sensing Applications10.1016/j.apsusc.2015.09.027 ↗
25. Superhydrophilicity to Superhydrophobicity Transition of Picosecond Laser Microstructured Aluminum in Ambient Air10.1016/j.jcis.2014.11.015 ↗
26. One-Step Fabrication of near Superhydrophobic Aluminum Surface by Nanosecond Laser Ablation10.1016/j.apsusc.2015.06.104 ↗
27. Laser Ablation of Metal Substrates for Super-Hydrophobic Effect10.2961/jlmn.2011.01.0002 ↗
28. Femtosecond Laser Treatment of 316L Improves Its Surface Nanoroughness and Carbon Content and Promotes Osseointegration: An in Vitro Evaluation10.1016/j.colsurfb.2013.02.039 ↗
29. Thermal-Induced Transformation of Wetting Behaviors on Laser-Textured SiC Surfaces10.1007/s11431-016-6058-6 ↗
30. Improving Hydrophobicity of Laser Textured SiC Surface with Micro-Square Convexes10.1016/j.apsusc.2012.11.068 ↗
31. Kinetics of Liquid Liquid Displacement10.1016/0021-9797(69)90411-1 ↗
32. Hydrodynamics of Wetting10.1007/BF01012963 ↗
33. A Combined Molecular-Hydrodynamic Approach to Wetting Kinetics10.1021/la00043a013 ↗
34. Dynamic Wetting by Liquids of Different Viscosity10.1006/jcis.2002.8513 ↗
35. Dynamic Wetting and Spreading and the Role of Topography10.1088/0953-8984/21/46/464122 ↗
36. Molecular Origin of Contact Line Friction in Dynamic Wetting10.1103/PhysRevFluids.3.074201 ↗
37. Dynamic Characteristics of Water Spreading over Laser-Textured Aluminum Alloy Surfaces10.1016/j.colsurfa.2020.125253 ↗
38. Spreading of Biologically Relevant Liquids over the Laser Textured Surfaces10.1016/j.jcis.2020.02.006 ↗
39. Anisotropic Spreading Along the Textured Surfaces with Isotropic Wetting
40. Sivkov, A., Gerasimov, D., Evdokimov, A., Rakhmatullin, I., and Nikitin, D. (2016, January 1–3). Spark Plasma Sintering of Ceramics Based on Silicon Nitride and Titanium Nitride. Proceedings of the 2016 11th International Forum on Strategic Technology (IFOST), Novosibirsk, Russia.10.1109/IFOST.2016.7884076 ↗
41. Expanding the Scope of SiC Ceramics through Its Surface Modification by Different Methods10.1016/j.surfcoat.2022.128263 ↗
42. Orlova, E., Glushkov, D., Abedtazehabadi, A., Belyaev, S., and Feoktistov, D. (2022). Influence of the Texture Configuration of Heating Surfaces Created by Laser Irradiation on the Ignition and Combustion Characteristics of Liquid Fuels. Appl. Sci., 13.10.3390/app13010095 ↗
43. Extraordinary Shifts of the Leidenfrost Temperature from Multiscale Micro/Nanostructured Surfaces10.1021/la401936w ↗
44. Influence of Roughness on Polar and Dispersed Components of Surface Free Energy and Wettability Properties of Copper and Steel Surfaces10.1016/j.surfcoat.2021.127518 ↗
45. Recent Progress in Axisymmetric Drop Shape Analysis (ADSA)10.1016/j.cis.2006.06.001 ↗
46. A High-Accuracy Polynomial Fitting Approach to Determine Contact Angles10.1016/S0927-7757(03)00053-0 ↗
47. Surface-Wetting Characterization Using Contact-Angle Measurements10.1038/s41596-018-0003-z ↗
48. Wang, Z., Wille, U., and Juaristi, E. (2017). Encyclopedia of Physical Organic Chemistry, John Wiley & Sons, Ltd.
49. Maslov, E.N. (1974). Theory of Grinding Materials, Mashinostroenie.
50. Roughness Dependent Wettability of Sputtered Copper Thin Films: The Effect of the Local Surface Slope10.1063/1.5092672 ↗
51. Pilot, R., Signorini, R., Durante, C., Orian, L., Bhamidipati, M., and Fabris, L. (2019). A Review on Surface-Enhanced Raman Scattering. Biosensors, 9.10.3390/bios9020057 ↗
52. Surface Behaviors of Droplet Manipulation in Microfluidics Devices10.1016/j.cis.2022.102770 ↗
53. Dynamics of Wetting: Effects of Surface Roughness10.1021/j100280a075 ↗
54. The Influence of Topography on Dynamic Wetting10.1016/j.cis.2013.04.005 ↗
55. Contact Angles: History of over 200 Years of Open Questions10.1680/jsuin.19.00007 ↗
56. Hydrophobic Materials and Coatings: Principles of Design, Properties and Applications10.1070/RC2008v077n07ABEH003775 ↗