journal article·2023-07-24Open access

Research on Active Precontrol Strategy for Shape and Performance of Helicopter Spiral Bevel Gears

Yanming Mu, Xiangying Hou, Xueming He

Applied Sciences· Volume 13· Issue 14

Abstract

Gear vibration becomes unmanageable under extreme conditions, which shortens the time between overhauls of the helicopter reducer and affects the service efficiency of helicopters. For this purpose, an active precontrol strategy for shape and performance was developed for spiral bevel gear (SBG) systems, thus prolonging the reliable service period of helicopters. Firstly, the perfect pinion surface was built based on the preset contact path (CP) and transmission error (TE). Secondly, through a combination of tooth contact analysis (TCA) and loaded tooth contact analysis (LTCA), the loaded transmission error (LTE), meshing stiffness (MS), and meshing impact (MI) of the SBG transmission were obtained. Thirdly, an eight-degrees-of-freedom (8-DOF) dynamic model was built, and a simplified dynamic model was generated based on this. As regards the dynamic response, the root mean square of normal vibration acceleration (RMA) of the SBG transmission was obtained by solving the differential equation of motion. The RMA of the SBG transmission was also analysed based on the basic theory of vector structural mechanics. Finally, an optimization model aimed at reducing the RMA of the SBG transmission was established using ease-off, and a redesigned SBG transmission with good dynamic performance was obtained through optimization. Simulation analysis showed that the LTE and MS amplitudes of the optimized gear were smaller than those of the original gear. The impact force and impact velocity of the optimized gear were 27.02% and 25.81%, respectively, lower than those of the original gear. The RMA value of the optimized gear was much lower than that of the original gear. The normal vibration velocity and displacement of the optimized gear transmission were also cut down. Therefore, the design approach can effectively increase the performance of gear transmission.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical Engineering and Vibrations Research · Tribology and Lubrication Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Jiangnan University, Wuxi 214122, China

Jiangsu Pacific Precision Forging Co., Ltd., Taizhou 225500, China

Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi 214122, China

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Funding

National Key Research and Development Program of China · National Science Foundation of China

References (40)

Show source-provided references
1. Effect of static transmission error on dynamic responses of spiral bevel gear10.1007/s11771-013-1530-y ↗
2. Optimization design of loaded transmission error for HGT hypoid gear drives
3. Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors10.1016/j.cja.2013.05.005 ↗
4. Optimal machine-tool settings for the manufacture of face-hobbed spiral bevel gears10.1115/1.4027635 ↗
5. Manufacture of optimized face-hobbed spiral bevel gears on computer numerical control hypoid generator10.1115/1.4026820 ↗
6. Optimization of face-hobbed hypoid gears10.1016/j.mechmachtheory.2014.02.003 ↗
7. Design and manufacture of spiral bevel gears with reduced transmission errors10.1115/1.3087540 ↗
8. Optimal machine tool settings for face-hobbed hypoid gears manufactured on CNC hypoid generator10.1007/s00170-016-8857-0 ↗
9. New methodology to reduce the transmission error of the spiral bevel gears10.1016/j.cirp.2014.03.124 ↗
10. Optimization of the loaded contact pattern in hypoid gears by automatic topography modification10.1115/1.3013844 ↗
11. An ease-off based optimization of the loaded transmission error of hypoid gears10.1115/1.4000645 ↗
12. A load distribution model for hypoid gears using ease-off topography and shell theory10.1016/j.mechmachtheory.2009.03.009 ↗
13. An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations10.1115/1.4001722 ↗
14. Design of multi-objective tooth optimization for hypoid gear with ease-off topological modification
15. Optimization design of vibration reduction for hypoid gears with ease-off flank modification
16. Relationship between transmission error, contact ratio and noise of spiral bevel gear
17. Adaptive data-driven modeling, prediction and optimal control for loaded transmission error of helicopter zerol spiral bevel gear transmission system10.1016/j.mechmachtheory.2021.104417 ↗
18. Wave tooth surface design of high contact ratio spiral bevel gear with minimum loaded transmission error
19. Dynamic analysis of spiral bevel and hypoid gears with high-order transmission errors10.1016/j.jsv.2017.12.022 ↗
20. A method of local synthesis of gears grounded on the connection between the principal and geodetic curvatures of surfaces
21. Litvin, F.L., and Zhang, Y. (1991). Local Synthesis and Tooth Contact Analysis of Face-Milled Spiral Bevel Gears, NASA Lewis Research Center.
22. Overall optimization on machine-tool settings of spiral bevel gears
23. A novel ease-off flank modification methodology for spiral bevel and hypoid gears10.1016/j.mechmachtheory.2010.03.010 ↗
24. A flank correction methodology for a five-axis CNC gear profile grinding machine10.1016/j.mechmachtheory.2011.08.009 ↗
25. High-precision modification of tooth surface for spiral bevel gears
26. Multi-objective ease-off optimization of hypoid gears for their efficiency, noise, and durability performances
27. Ease-off based compensation of tooth surface deviations for spiral bevel and hypoid gears: Only the pinion needs corrections
28. Calculation of gear mesh stiffness and loaded tooth contact analysis based on ease-off surface topology10.1177/16878132221133979 ↗
29. A direct preset method for solving ease-off tooth surface of spiral bevel gear10.1016/j.mechmachtheory.2022.105123 ↗
30. Manufacturing process for a face gear drive with local bearing contact and controllable unloaded meshing performance based on ease-off surface modification10.1115/1.4032579 ↗
31. An ease-off based approach to designing a high-order transmission motion for face-milled spiral bevel gears10.1504/IJVD.2019.111583 ↗
32. Design and dynamic performance analysis of high-contact-ratio spiral bevel gear based on ease-off technology10.1007/s12541-021-00584-0 ↗
33. An innovative ease-off flank modification method based on the dynamic performance for high-speed spiral bevel gear with high-contact-ratio10.1016/j.mechmachtheory.2021.104345 ↗
34. Wang, Q., and Jiang, J.K. (2022). Design and analysis for hypoid gears with ease-off flank modification. Appl. Sci., 12.10.3390/app12020822 ↗
35. An active ease-off topography modification approach for hypoid pinions based on a modified error sensitivity analysis method10.1115/1.4043206 ↗
36. Multiobjective ease-off optimization of high-speed spiral bevel gear for loaded meshing performance10.1007/s40430-021-03086-2 ↗
37. Fundamentals of a vector form intrinsic finite element: Part II. Plane solid elements10.1017/S1727719100003348 ↗
38. Static contact analysis of spiral bevel gear based on modified VFIFE (vector form intrinsic finite element) method10.1016/j.apm.2018.03.021 ↗
39. Study on dynamic of spiral bevel gears based on meshing characteristics
40. Impact analysis and vibration reduction design of spiral bevel gears