journal article·2006-03

Progressive fracture modeling of the failure wave in impacted glass

Guowen Yao, Zhanfang Liu, Peiyan Huang

Acta Mechanica Solida Sinica· Volume 19· Issue 1
Publisher page

Abstract

ABSTRACT The failure wave has been observed propagating in glass under impact loading since1991. It is a continuous fracture zone which may be associated with the damage accumulation process during the propagation of shock waves. A progressive fracture model was proposed to describe the failure wave formation and propagation in shocked glass considering its heterogeneous meso-structures. The original and nucleated microcracks will expand along the pores and other defects with concomitant dilation when shock loading is below the Hugoniot Elastic Limit. The governing equation of the failure wave is characterized by inelastic bulk strain with material damage and fracture. And the inelastic bulk strain consists of dilatant strain from nucleation and expansion of microcracks and condensed strain from the collapse of the original pores. Numerical simulation of the free surface velocity was performed and found in good agreement with planar impact experiments on K9 glass at China Academy of Engineering Physics. And the longitudinal, lateral and shear stress histories upon the arrival of the failure wave were predicted, which present the diminished shear strength and lost spall strength in the failed layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Analysis of Composite Materials · Glass properties and applications · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Rasorenov, S.V., Kanel, G.I., Fortov, V.E. and Abasehov, M.M., The fracture of glass under high-pressure impulsive loading, High Press. Res., Vol.6, 1991, 225–232.10.1080/08957959108202508 ↗
2. Kanel, G.I., Rasorenov, S.V. and Fortov, V.E., The failure waves and spallations in homogeneous brittle materials, In: Shock Compression of Condensed Matter-1991, Virginia, USA, 1992, 451–454.10.1016/B978-0-444-89732-9.50102-3 ↗
3. Bourne, N.K., Millett, J., Rosenberg, Z. and Murray N., On the shock induced failure of brittle solids, J. Mech. Phys. Solids., Vol.46, 1998, 1887–1908.10.1016/S0022-5096(98)00046-5 ↗
4. Rosenberg, Z., Bourne, N.K. and Millett, J., Direct measurements of strain in shock-loaded glass specimens, J. Appl. Phys., Vol.79, 1996, 3971–3974.10.1063/1.361825 ↗
5. Millett, J., Bourne, N.K., Rosenberg, Z., Measurements of strain in a shock loaded, high-density glass, In: Shock Compression of Condensed Matter-1999, Utah, USA, 2000, 607–610.10.1063/1.1303547 ↗
6. He, H.L., Jing, F.Q., Jin, X.G. and Kanel, G.I., Microstructure damage of glasses under shock wave compression, Chin. J. High Press. Phys., Vol.12, 1998, 241–249.
7. Cazamias, J.U., Fiske, P.S. and Bless, S.J., Sound speeds of post-failure wave glass, In: Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, New Mexico, USA, 2001, 173–179.
8. Bless, S.J., Brar, N.S., Kanel, G.I. and Rosenberg, Z., Failure waves in glass, J. Amer. Ceramics Soc., Vol.75, 1992, 1002–1004.10.1111/j.1151-2916.1992.tb04174.x ↗
9. Bourne, N.K., Rosenberg, Z. and Field J.E., High-speed photography of compressive failure in glasses, J. Appl. Phys., Vol.78, 1995, 3736–3739.10.1063/1.360709 ↗
10. Clifton, R.J., Analysis of failure waves in glasses, Appl. Mech. Rev., Vol.46 No.(12–1), 1993, 540–546.10.1115/1.3120315 ↗
11. Grady, D.E., Dynamic failure of brittle solids, Sandia Technical Report, 1994, TMDG0694.
12. Brar, N.S., Failure waves in glass and ceramics under shock compression, In: Shock Compression of Condensed Matter-1999, Utah, USA, 2000, 601–606.10.1063/1.1303546 ↗
13. Zhao, J.H., Tan, X.X., Sun, C.W., Zhao, F., Wen, S.G., Zhang, X.L. and Duan, Z.P., Investigations of failure waves in K9 glass using shadowgraph, Explosion and Shockwaves, Vol.21, No.2, 2001, 150–156.
14. Nikolaevskii, V.N., Limit velocity of fracture front and dynamic strength of brittle solids, Int. J. Eng. Sci., Vol.19, 1981, 41–56.10.1016/0020-7225(81)90048-3 ↗
15. Resnyansky, A.D., Bourne, N.K., Factors influenceing the shape of the fracture wave induced by the rod impact of a brittle material, In: Shock Compression of Condensed Matter-2001, Georgia, USA, 2002, 743–746.10.1063/1.1483644 ↗
16. Partom, Y., Modeling failure waves in glass, Int. J. Impact Eng., Vol.21, 1998, 791–799.10.1016/S0734-743X(98)00032-3 ↗