journal article·2019-10

Controllable Bending of Bi-hydrogel Strips with Differential Swelling

Yi Wu, Xingpeng Hao, Rui Xiao, Ji Lin, Zi Liang Wu, Jun Yin, Jin Qian

Acta Mechanica Solida Sinica· Volume 32· Issue 5
Publisher page

Abstract

Bi-hydrogel strips consisting of a highly swelling layer and a non-swelling layer are investigated in this study, in which the differential swelling capabilities and mismatch strain in the composite structure drive the strips into a bending configuration when being exposed to solvents. A modified analytical model originated from Timoshenko theory on bi-material beam is proposed to predict the swelling-induced bending shape of the bi-hydrogel strips, with explicit relations of bending curvature and mid-span deflection versus mismatch strain. Different sets of experiments were performed to verify the analytical model and its solutions, in which the swelling-induced mismatch strain was systematically tuned by the selection of saline concentration. The broad agreements between the theoretical and experimental results indicate that the modified analytical model can be used to guide the design of morphing elements by modulating layer-by-layer mismatches in gel composites to produce precise and complex shape transformations for practical applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials and Mechanics · Structural Analysis and Optimization · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Yang W, Wang HT, Li TF, et al. X-mechanics: an endless frontier. Sci China Phys Mech. 2019;62(1):014601.10.1007/s11433-018-9274-6 ↗
2. Hu XL, Zhang YQ, Xie ZG, et al. Stimuli-responsive polymersomes for biomedical applications. Biomacromolecules. 2017;18(3):649–73.10.1021/acs.biomac.6b01704 ↗
3. Cai GF, Wang JX, Qian K, et al. Extremely stretchable strain sensors based on conductive self-healing dynamic cross-links hydrogels for human-motion detection. Adv Sci. 2016;4(2):1600190.10.1002/advs.201600190 ↗
4. Liu XY, Yuk H, Lin ST, et al. 3D printing of living responsive materials and devices. Adv Mater. 2018;30(4):1704821.10.1002/adma.201704821 ↗
5. Mannoor MS, Jiang Z, James T, et al. 3D printed bionic ears. Nano Lett. 2013;13(6):2634–9.10.1021/nl4007744 ↗
6. Leong TG. Tetherless thermobiochemically actuated microgrippers. Proc Natl Acad Sci USA. 2009;106(3):703–8.10.1073/pnas.0807698106 ↗
7. Gladman AS, Matsumoto EA, Nuzzo RG, et al. Biomimetic 4D printing. Nat Mater. 2016;15(4):413–8.10.1038/nmat4544 ↗
8. Fu FF, Shang LR, Chen ZY, et al. Bioinspired living structural color hydrogels. Sci Rob. 2018;3(16):8580.10.1126/scirobotics.aar8580 ↗
9. Yuk H, Lin ST, Ma C, et al. Hydraulic hydrogel actuators and robots optically and sonically camouflaged in water. Nat Commun. 2017;8:14230.10.1038/ncomms14230 ↗
10. Pu X, Liu MM, Chen XY. Ultrastretchable, transparent triboelectric nanogenerator as electronic skin for biomechanical energy harvesting and tactile sensing. Sci Adv. 2017;3(5):1700015.10.1126/sciadv.1700015 ↗
11. Zhang YS, Khademhosseini A. Advances in engineering hydrogels. Science. 2017;356(6337):eaaf3627.10.1126/science.aaf3627 ↗
12. Thoniyot P, Tan MJ, Karim AA, et al. Nanoparticle-hydrogel composites: concept, design, and applications of these promising, multi-functional materials. Adv Sci. 2015;2(1–2):1400010.10.1002/advs.201400010 ↗
13. Zhang H, Guo XG, Wu J, et al. Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves. Sci Adv. 2018;4(6):eaar8535.10.1126/sciadv.aar8535 ↗
14. Wu L, Mao GY, Nian GD, et al. Mechanical characterization and modeling of sponge-reinforced hydrogel composites under compression. Soft Matter. 2018;14(21):4355–63.10.1039/C8SM00678D ↗
15. Lee JB, Peng S, Yang D, et al. A mechanical metamaterial made from a DNA hydrogel. Nat Nanotechnol. 2012;7(12):816–20.10.1038/nnano.2012.211 ↗
16. Ning X, Wang XJ, Zhang Y, et al. Assembly of advanced materials into 3D functional structures by methods inspired by origami and kirigami: a review. Adv Mater Interfaces. 2018;5:1800284.10.1002/admi.201800284 ↗
17. Shahram J, Molly MG, Amir AZ. Multimaterial control of instability in soft mechanical metamaterials. Phys Rev Appl. 2018;9(6):064013.10.1103/PhysRevApplied.9.064013 ↗
18. Ionov L. Hydrogel-based actuators: possibilities and limitations. Mater Today. 2014;17(10):494–503.10.1016/j.mattod.2014.07.002 ↗
19. Peng X, Wang HL. Shape changing hydrogels and their applications as soft actuators. J Polym Sci Part B Polym Phys. 2018;56(19):1314–24.10.1002/polb.24724 ↗
20. Jeon SJ, Hauser AW, Hayward RC. Shape-morphing materials from stimuli-responsive hydrogel hybrids. Acc Chem Res. 2017;50(2):161–9.10.1021/acs.accounts.6b00570 ↗
21. Zhao ZA, Kuang X, Yuan C, et al. Hydrophilic/hydrophobic composite shape-shifting structures. ACS Appl Mater Interfaces. 2018;10(23):19932–9.10.1021/acsami.8b02444 ↗
22. Amirali N, Hakan A, Kwan L, et al. Bioinspired 3D structures with programmable morphologies and motions. Nat Commun. 2018;9(1):3705.10.1038/s41467-018-05569-8 ↗
23. Wang ZJ, Zhu CN, Hong W, et al. Cooperative deformations of periodically patterned hydrogels. Sci Adv. 2017;3(9):1700348.10.1126/sciadv.1700348 ↗
24. Ma PY, Niu BF, Lin J, et al. Sequentially controlled deformations of patterned hydrogels into 3D configurations with multilevel structures. Macromol Rapid Commun. 2019;40(3):1800681.10.1002/marc.201800681 ↗
25. Wang ZJ, Hong W, Wu ZL, et al. Site-specific pre-swelling-directed morphing structures of patterned hydrogels. Angew Chem. 2017;56(50):15974–8.10.1002/anie.201708926 ↗
26. Zheng SY, Shen YY, Zhu FB, et al. Programmed deformations of 3D-printed tough physical hydrogels with high response speed and large output force. Adv Funct Mater. 2018;28(37):1803366.10.1002/adfm.201803366 ↗
27. Hu Z, Zhang X, Li Y. Synthesis and application of modulated polymer gels. Science. 1995;269(5223):525–7.10.1126/science.269.5223.525 ↗
28. Zhao ZA, Wu JT, Mu XM, et al. Desolvation induced origami of photocurable polymers by digit light processing. Macromol Rapid Commun. 2017;38(13):1600625.10.1002/marc.201600625 ↗
29. Zhao ZA, Wu JT, Mu XM, et al. Origami by frontal photopolymerization. Sci Adv. 2017;3(4):1602326.10.1126/sciadv.1602326 ↗
30. Kuang X, Roach DJ, Wu JT, et al. Advances in 4D printing: materials and applications. Adv Funct Mater. 2019;29(2):1805290.10.1002/adfm.201805290 ↗
31. Ding Z, Yuan C, Peng XR, et al. Direct 4D printing via active composite materials. Sci Adv. 2017;3(4):e1602890.10.1126/sciadv.1602890 ↗
32. Timoshenko S. Analysis of bimetal thermostats. J Opt Soc Am. 1925;11:233–55.10.1364/JOSA.11.000233 ↗
33. Hong W, Zhao XH, Zhou JX, et al. A theory of coupled diffusion and large deformation in polymeric gels. J Mech Phys Solids. 2008;56(5):1779–93.10.1016/j.jmps.2007.11.010 ↗
34. Guo W, Li ME, Zhou JX. Modeling programmable deformation of self-folding all-polymer structures with temperature-sensitive hydrogels. Smart Mater Struct. 2013;22(11):115028.10.1088/0964-1726/22/11/115028 ↗
35. Ding ZW, Toh W, Hu JY, et al. A simplified coupled thermo-mechanical model for the transient analysis of temperature-sensitive hydrogels. Mech Mater. 2016;97:212–27.10.1016/j.mechmat.2016.02.018 ↗
36. Liu ZS, Toh W, Ng TY. Advances in mechanics of soft materials: a review of large deformation behavior of hydrogels. Int J Appl Mech. 2015;7(05):1530001.10.1142/S1758825115300011 ↗
37. Morimoto T, Ashida F. Temperature-responsive bending of a bilayer gel. Int J Solids Struct. 2015;56:20–8.10.1016/j.ijsolstr.2014.12.009 ↗
38. Drozdov AD, Christiansen JD. The effects of pH and ionic strength of swelling of cationic gels. Int J Appl Mech. 2016;8(05):1650059.10.1142/S1758825116500599 ↗
39. Attaran A, Brummund J, Wallmersperger T. Modeling and simulation of the bending behavior of electrically-stimulated cantilevered hydrogels. Smart Mater Struct. 2015;24(3):035021.10.1088/0964-1726/24/3/035021 ↗
40. Xiao R. Modeling mismatch strain induced self-folding of bilayer gel structures. Int J Appl Mech. 2016;08(07):1640004.10.1142/S1758825116400044 ↗