PFC Inductor Design Considering Suppression of the Negative Effects of Fringing Flux
Source abstract
Abstract
In this paper, the main aim of the study was the investigation of the possibilities of power inductor design, reflecting the performance of the component itself, as well as the operational efficiency of the power factor correction (PFC) converter. PFC inductors represent a key component of the converter, while within the design of any magnetic component, several design rules must be considered to provide proper operational performance. Here we discuss skin-effect, while the proximity effect and formation of fringing flux pose a more serious problem in terms of mitigating their negative impact. Therefore, in this study, the space is devoted exclusively to the analysis of the impact of the fringing flux of the PFC inductor and subsequently to the possibilities of its suppression. The resulting optimizations are reflected in the investigation of the operational efficiency of the PFC converter.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced DC-DC Converters · Induction Heating and Inverter Technology · Multilevel Inverters and Converters
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechatronics and Electronics, Faculty of Electrical Engineering and Information Technologies, University of Zilina, 010 26 Zilina, Slovakia
Department of Control Systems, Lukasiewicz Research Network—Institute for Sustainable Technologies, 26-600 Radom, Poland
Department of Electronics Engineering, Faculty of Electrical and Electronics Engineering, Kaunas University of Technology, 44249 Kaunas, Lithuania
Funding
National Grant Agency Vega · National Grant Agency APVV
References (22)
Show source-provided references
1. (2022, April 20). The Effects of an Air Gap in Magnetics. Available online: https://www.cettechnology.com/the-effects-of-an-air-gap-in-magnetics/.
2. An Improved Calculation Method of High-Frequency Winding Losses for Gapped Inductors
3. McLyman, C.W.T. (2017). Transformer and Inductor Design Gandbook, CRC Press.10.1201/b10865 ↗
4. Okilly, A.H., and Baek, J. (2021). Optimal Design Analysis with Simulation and Experimental Performance Investigation of High-Power Density Telecom PFC Converters. Appl. Sci., 11.10.3390/app11177911 ↗
5. (2022, April 20). Evaluating Fringing Effects in Multi-Gapped Toroids. Available online: https://eepower.com/technical-articles/evaluating-fringing-effects-in-multi-gapped-toroids/#.
6. Design Methodology for Transformers Including Integrated and Centertapped Structures for LLC Resonant Converters
7. Szczerba, P., Raczko, W., Ligenza, S., and Worek, C. (2021, January 27–30). Analytical design optimization of PFC boost inductor in CCM. Proceedings of the 21st International Symposium on Power Electronics (Ee), Novi Sad, Serbia.10.1109/Ee53374.2021.9628379 ↗
8. Liu, Y., Li, M., Dou, Y., Ouyang, Z., and Andersen, M.A.E. (2020, January 15–19). Investigation and optimization for planar coupled inductor dual-phase interleaved GaN-based totem-pole PFC. Proceedings of the IEEE Applied Power Electronics Conference and Exposition (APEC), New Orleans, LA, USA.10.1109/APEC39645.2020.9124069 ↗
9. Zou, J., Wu, H., Liu, Y., Yang, L., and Xu, X. (2020, January 11–15). Optimal design of integrated planar inductor for a hybrid totem-pole PFC converter. Proceedings of the 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, USA.10.1109/ECCE44975.2020.9235722 ↗
10. Impact of the fringing effect on temperature distribution in windings and physical properties of toroidal ferrite inductors with a dual air gap
11. Sullivan, C.R., and Zhang, R.Y. (2014, January 16–20). Simplified design method for litz wire. Proceedings of the Applied Power Electronics Conference and Exposition (APEC), Fort Worth, TX, USA.10.1109/APEC.2014.6803681 ↗
12. Accurate Analytical Model of Winding Losses in Round Litz Wire Windings10.1109/20.914375 ↗
13. Jez, R., and Polit, A. (2014, January 17). Influence of air-gap length and cross section on magnetic circuit parameters. Proceedings of the 2014 COMSOL Conference, Cambridge, UK.
14. Design guidelines for interleaved single-phase boost PFC circuits10.1109/TIE.2009.2020073 ↗
15. Ditze, S., Ehrlich, S., Weitz, N., Sauer, M., Aßmus, F., Sacher, A., Joffe, C., Seßler, C., and Meißner, P. (2022). A High-Efficiency High-Power-Density SiC-Based Portable Charger for Electric Vehicles. Electronics, 11.10.3390/electronics11121818 ↗
16. Winkler, P., and Gunther, W. (2017, January 16–18). Using powder materials to replace airgaps for fringing flux reduction. Proceedings of the International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, PCIM Europe, Nuremberg, Germany.
17. Alabakhshizadeh, A., and Midtgård, O. (2013, January 16–21). Air gap fringing flux reduction in a high frequency inductor for a solar inverter. Proceedings of the IEEE 39th Photovoltaic Specialists Conference (PVSC), Tampa, FL, USA.10.1109/PVSC.2013.6745065 ↗
18. Optimal Design Method of Interleaved Boost PFC for Improving Efficiency from Switching Frequency, Boost Inductor, and Output Voltage10.1109/TPEL.2018.2872427 ↗
19. Kasikowski, R., and Wiecek, B. (2018, January 25–29). The reduction of fringing effect power loss in gapped ferrite inductors by changing the resistance and diameter of windings. Proceedings of the 14th Quantitative InfraRed Thermography Conference (QIRT), Berlin, Germany.10.21611/qirt.2018.p17 ↗
20. Ramos-Paja, C.A., Saavedra-Montes, A.J., and Bastidas-Rodriguez, J.D. (2022). Co-Design of the Control and Power Stages of a Boost-Based Rectifier with Power Factor Correction Depending on Performance Criteria. Computation, 10.10.3390/computation10040061 ↗
21. Cacciato, M., Consoli, A., Crisafulli, V., Vitale, G., and Abbate, N. (2010, January 12–16). A new resonant active clamping technique for bi-directional converters in HEVs. Proceedings of the IEEE Energy Conversion Congress and Exposition, Atlanta, GA, USA.10.1109/ECCE.2010.5618257 ↗
22. Inductive coupling system for electric scooter wireless charging: Electromagnetic design and thermal analysis10.1007/s00202-019-00765-1 ↗