Numerical Investigation of Plastic Deformation of Flat Plate for Slamming Impact by Coupled Eulerian–Lagrangian Method
Source abstract
Abstract
Ships and offshore structures are subjected to impact loads, such as slamming and sloshing. High impact pressures can cause permanent hull deformation by a single impact event. In addition, significant fatigue damage can be accumulated via repeated impact pressures. In this study, the plastic deformation behavior of flat plates under slamming impact is numerically investigated using a coupled Eulerian–Lagrangian method. The dynamic impact pressure of the flat plates by weight and drop height is investigated under the assumption of viscous and compressible fluids. To evaluate the plastic deformation of the plate, contact between water and the plate is removed after a certain duration after dropping, and then the remaining deformation is measured. Optimized finite element models for drop simulations are selected via a mesh sensitivity study, and the simulation results are calibrated and compared with experimental data. Results of the simulation and the experiment show good agreement in general in terms of deflection range. However, because the initial condition of the plate is not reflected in the simulation, some discrepancy is observed in maximum deflections. Finally, a discussion is presented for a more accurate fluid impact analysis model based on the comparison results with the experimental data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics Simulations and Interactions · High-Velocity Impact and Material Behavior · Ship Hydrodynamics and Maneuverability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Naval Architecture and Offshore Engineering, Dong-A University, Busan 49315, Korea
Funding
Dong-A University research fund
References (31)
Show source-provided references
1. Structural damage analysis of a fast ship due to bow flare slamming10.3233/ISP-1985-3236902 ↗
2. Buchner, B., and Voogt, A. (2004, January 20–22). Wave Impacts due to Steep Fronted Waves. Proceedings of the Rogue Waves 2004, Brest, France.
3. Experimental investigation of slamming impact acted on flat bottom bodies and cumulative damage10.1016/j.ijnaoe.2017.06.004 ↗
4. A study on accumulated damage of steel wedges with dead-rise 10° due to slamming loads10.1016/j.ijnaoe.2018.03.001 ↗
5. Experiments on Flat-Bottom Slamming10.5957/jsr.1966.10.1.10 ↗
6. Chuang, S.L. (1970). Investigation of Impact of Rigid and Elastic Bodies with Water, Department of the Navy, Naval Ship Research and Development Center. Report 3248.
7. Sayeed, T.M., Peng, H., and Veitch, B. (2010, January 11–12). Experimental investigation of slamming loads on a wedge. Proceedings of the MARTEC2010, the International Conference on Marine Technology, BUET, Dhaka, Bangladesh.
8. Impact of a free-falling wedge with water: Synchronized visualization, pressure and acceleration measurements10.1088/0169-5983/42/3/035509 ↗
9. Evaluation of the pressure-resistance of the intersection of a Membrane-type primary barrier: Part 1 experimental study10.5916/jamet.2020.44.3.203 ↗
10. Luo, H., Hu, J., and Soares, C.G. (2010, January 6–11). Numerical Simulation of Hydroelastic Responses of Flat Stiffened Panels under Slamming Loads. Proceedings of the ASME 29th International Conference on Ocean, Offshore and Arctic Engineering, Shanghai, China.10.1115/OMAE2010-20027 ↗
11. Numerical investigation on incompressible fluid flow and heat transfer of porous media using Lattice Boltzmann method
12. Study on PIV-Based Pressure Estimation Method of Wave Loading under a Fixed Deck10.26748/KSOE.2020.059 ↗
13. Huo, F., Yang, H., Yao, Z., An, K., and Xu, S. (2021). Study on Slamming Pressure Characteristics of Platform under Freak Wave. J. Mar. Sci. Eng., 9.10.3390/jmse9111266 ↗
14. Optimization Approach for a Catamaran Hull Using CAESES and STAR-CCM+10.26748/KSOE.2019.058 ↗
15. Liao, X., Chen, Z., Gui, H., and Du, M. (2021). CFD Prediction of Ship Seakeeping and Slamming Behaviors of a Trimaran in Oblique Regular Waves. J. Mar. Sci. Eng., 9.10.3390/jmse9101151 ↗
16. A Comparative Study on the Prediction of Bow Flare Slamming load using CFD and Prescript Formula for the Container Ship
17. (2022, March 01). American Bureau of Shipping, Strength assessment of membrane type LNG containment systems under sloshing loads. ABS Guidance Notes, 2006, Available online: https://ww2.eagle.org.
18. Evaluation of the pressure-resistance of the intersection of a Membrane-type primary barrier: Part 2 finite element analysis10.5916/jamet.2020.44.3.210 ↗
19. Hydro-plastic response of beams and stiffened panels subjected to extreme water slamming at small impact angles, Part I: An analytical solution10.1016/j.marstruc.2019.01.002 ↗
20. Shock-Resistance Responses of Frigate Equipments by Underwater Explosion10.26748/KSOE.2022.008 ↗
21. Farhangi, V., and Karakouzian, M. (2020). Effect of Fiber Reinforced Polymer Tubes Filled with Recycled Materials and Concrete on Structural Capacity of Pile Foundations. Appl. Sci., 10.10.20944/preprints202002.0065.v1 ↗
22. Study on Vortex-Induced Vibration Predictions for Ship Rudders10.26748/KSOE.2020.042 ↗
23. Impact of the Thruster Jet Flow of Ultra-large Container Ships on the Stability of Quay Walls10.26748/KSOE.2021.067 ↗
24. Arbitrary Lagrangian-Eulerian methods
25. Comparative Study of Ice Gouge Simulation Considering Ice Keel-Seabed Interactions10.26748/KSOE.2019.036 ↗
26. Numerical Investigation of Water Entry Problem of Pounders with Different Geometric Shapes and Drop Heights for Dynamic Compaction of the Seabed
27. Numerical simulation of sphere water entry problem using Eulerian–Lagrangian method10.1016/j.apm.2013.09.005 ↗
28. Computational methods in Lagrangian and Eulerian hydrocodes10.1016/0045-7825(92)90042-I ↗
29. Ragab, M., Liu, H., Yang, G.-J., and Ahmed, M.M.Z. (2021). Friction Stir Welding of 1Cr11Ni2W2MoV Martensitic Stainless Steel: Numerical Simulation Based on Coupled Eulerian Lagrangian Approach Supported with Experimental Work. Appl. Sci., 11.10.3390/app11073049 ↗
30. (2022, March 03). Dassault Systèmes Simulia Corp, 2014. Abaqus 6.14 Theory Manual. Available online: https://blogs.3ds.com.
31. O’Connor, C., Mohajernasab, S., and Abdussamie, N. Numerical investigation into water entry problems of a flat plate with air pockets. J. Ocean Eng. Sci., 2022. in press.10.1016/j.joes.2022.04.011 ↗