journal article·2022-07-31Open access

Discrete-Time System Conditional Optimization Based on Takagi–Sugeno Fuzzy Model Using the Full Transfer Function

Radiša Jovanović, Vladimir Zarić, Zoran Bučevac, Uglješa Bugarić

Applied Sciences· Volume 12· Issue 15

Abstract

The study proposes a novel method for synthesis of a discrete-time parallel distributed compensation (PDC) controller for the nonlinear discrete-time Takagi–Sugeno (TS) fuzzy plant model. For each of the fuzzy plant model linear subsystems, a local linear first order proportional-sum (PS) controller is designed. The algebraic technique is used in two-dimensional parameter space, utilizing the characteristic polynomial of the row nondegenerate full transfer function matrix. Each system’s relative stability is accomplished in relation to the selected damping coefficient. The supplementary criterion is the minimal value of the performance index in the form of the sum of squared errors (SSE). However, unlike the traditional technique, output error is impacted by all simultaneous actions on the system: nonzero inputs and nonzero initial conditions. The full transfer function matrix of the system allows for the treatment of simultaneous actions of the input vector and unknown unpredictable initial conditions. In order to show the improvement caused by the application of a new optimization method that considers nonzero initial conditions, a comparison of PDC controllers designed under zero and nonzero initial conditions is given, where the system in both cases starts from the same nonzero initial conditions, which is often the case in practice. The simulation and experimental results on a DC servo motor are shown to demonstrate the suggested method efficiency.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Stability and Control of Uncertain Systems · Advanced Control Systems Design · Fuzzy Logic and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Automatic Control Department, Faculty of Mechanical Engineering, University of Belgrade, 11000 Belgrade, Serbia

Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade, 11000 Belgrade, Serbia

Funding

Ministry of Education, Science and Technological Development of the Serbian Government · Science Fund of the Republic of Serbia

References (52)

Show source-provided references
1. Discrete-Time System Conditional Optimisation in the Parameter Space via the Full Transfer Function Matrix10.21278/TOF.453014220 ↗
2. Discrete-Time System Conditional Optimization in the Parameter Space with Nonzero Initial Conditions
3. Prabhat Dev, M., Sidharth, J., Kumar, H., Tripathi, B.N., and Khan, S.A. (2020). Various Tuning and Optimization Techniques Employed in PID Controller: A Review. Proceedings of the International Conference in Mechanical and Energy Technology, Springer.10.1007/978-981-15-2647-3_75 ↗
4. Zhmud, V., Hardt, W., Stukach, O.V., Dimitrov, L., and Nosek, J. (2019, January 5–7). The Parameter Optimization of the PID and PIDD Controller for a Discrete Object. Proceedings of the 2019 Dynamics of Systems, Mechanisms and Machines (Dynamics), Omsk, Russia.10.1109/Dynamics47113.2019.8944718 ↗
5. An optimal pid tuning method for a single-link manipulator based on the control parametrization technique
6. Kurokawa, R., Sato, T., Vilanova, R., and Konishi, Y. (2019). Discrete-Time First-Order Plus Dead-Time Model-Reference Trade-off PID Control Design. Appl. Sci., 9.10.3390/app9163220 ↗
7. Synthesis of PID-type controllers without parametric models: A graphical approach10.1016/j.enconman.2008.01.017 ↗
8. Stability regions in the parameter space: D-decomposition revisited10.1016/j.automatica.2005.08.010 ↗
9. Gryazina, E.N., and Polyak, B.T. (2005, January 15). Geometry of the stability domain in the parameter space: D-decomposition technique. Proceedings of the 44th IEEE Conference on Decision and Control, Seville, Spain.
10. D-decomposition method for stability checking for trinomial linear difference equation with two delays10.12732/ijpam.v111i3.11 ↗
11. D-decomposition technique state-of-the-art10.1134/S0005117908120011 ↗
12. Sands, T. (2021). Control of DC Motors to Guide Unmanned Underwater Vehicles. Appl. Sci., 11.10.3390/app11052144 ↗
13. Hoyos, F.E., Candelo-Becerra, J.E., and Rincón, A. (2021). Zero Average Dynamic Controller for Speed Control of DC Motor. Appl. Sci., 11.10.3390/app11125608 ↗
14. Kim, J., Jon, U., and Lee, H. (2020). State-Constrained Sub-Optimal Tracking Controller for Continuous-Time Linear Time-Invariant (CT-LTI) Systems and Its Application for DC Motor Servo Systems. Appl. Sci., 10.10.3390/app10165724 ↗
15. Hoyos, F.E., Candelo-Becerra, J.E., and Hoyos Velasco, C.I. (2020). Application of Zero Average Dynamics and Fixed Point Induction Control Techniques to Control the Speed of a DC Motor with a Buck Converter. Appl. Sci., 10.10.3390/app10051807 ↗
16. Motion controller design for the speed control of DC servo motor
17. Optimal Design of PID Controller for the Speed Control of DC Motor by Using Metaheuristic Techniques10.1155/2014/126317 ↗
18. Fuzzy logic approach to coupled level control10.1080/21642583.2016.1228486 ↗
19. Chao, C.T., Sutarna, N., Chiou, J.S., and Wang, C.J. (2017). Equivalence between Fuzzy PID Controllers and Conventional PID Controllers. Appl. Sci., 7.10.3390/app7060513 ↗
20. Tanaka, K., and Wang, H.O. (2001). Fuzzy Control Systems Design and Analysis, John Willey & Sons Inc.10.1002/0471224596 ↗
21. Stable Takagi-Sugeno fuzzy control designed by optimization
22. Fuzzy Control Systems: Past, Present and Future10.1109/MCI.2018.2881644 ↗
23. Fault Estimation Observer Design for Discrete-Time Takagi–Sugeno Fuzzy Systems Based on Homogenous Polynomially Parameter-Dependent Lyapunov Functions10.1109/TCYB.2017.2693323 ↗
24. Further Studies on Control Synthesis of Discrete-Time T-S Fuzzy Systems via Augmented Multi-Indexed Matrix Approach10.1109/TCYB.2014.2316491 ↗
25. Identification and control of a heat flow system based on the Takagi-Sugeno fuzzy model using the grey wolf optimizer10.2298/TSCI210825324J ↗
26. Fuzzy identification of systems and its applications to modeling and control10.1109/TSMC.1985.6313399 ↗
27. Torres-Pinzón, C.A., Paredes-Madrid, L., Flores-Bahamonde, F., and Ramirez-Murillo, H. (2021). LMI-Fuzzy Control Design for Non-Minimum-Phase DC-DC Converters: An Application for Output Regulation. Appl. Sci., 11.10.3390/app11052286 ↗
28. Zhang, B., and Shin, Y.C. (2021). A Data-Driven Approach of Takagi-Sugeno Fuzzy Control of Unknown Nonlinear Systems. Appl. Sci., 11.10.3390/app11010062 ↗
29. Chang, W.J., Tsai, M.H., and Pen, C.L. (2021). Observer-Based Fuzzy Controller Design for Nonlinear Discrete-Time Singular Systems via Proportional Derivative Feedback Scheme. Appl. Sci., 11.10.3390/app11062833 ↗
30. Parallel distributed compensator design of tank level control based on fuzzy Takagi-Sugeno model10.1016/j.asoc.2014.03.024 ↗
31. Performance-oriented parallel distributed compensation10.1016/j.jfranklin.2010.01.009 ↗
32. Taniguchi, T., Tanaka, K., Yamafuji, K., and Wang, H. (1999, January 2–4). Nonlinear model following control via Takagi-Sugeno fuzzy model. Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251), San Diego, CA, USA.
33. Distributed controller design and performance optimization for discrete-time linear systems10.1002/oca.2669 ↗
34. Dynamic programming for constrained optimal control of discrete-time linear hybrid systems10.1016/j.automatica.2005.04.017 ↗
35. Rosinová, D., and Hypiusová, M. (2021). Comparison of Nonlinear and Linear Controllers for Magnetic Levitation System. Appl. Sci., 11.10.3390/app11177795 ↗
36. Wang, Y.S., Matni, N., and Doyle, J. (2014, January 15–17). Localized LQR optimal control. Proceedings of the 53rd IEEE Conference on Decision and Control, Los Angeles, CA, USA.10.1109/CDC.2014.7039638 ↗
37. A primal-dual interior-point method for robust optimal control of linear discrete-time systems10.1109/9.880615 ↗
38. Multicriteria optimization in control of a chemical-technological system for production of benzene with fuzzy information
39. Orazbayev, B., Zhumadillayeva, A., Orazbayeva, K., Iskakova, S., Utenova, B., Gazizov, F., Ilyashenko, S., and Afanaseva, O. (2022). The System of Models and Optimization of Operating Modes of a Catalytic Reforming Unit Using Initial Fuzzy Information. Energies, 15.10.3390/en15041573 ↗
40. On the distribution of the roots of the characteristic equations of systems of regulation (in Russian)
41. The Peak Effect in Stationary Linear Systems with Scalar Inputs and Outputs
42. Large deviations in linear control systems with nonzero initial conditions10.1134/S0005117915060028 ↗
43. Buchevats, Z.M., and Gruyitch, L.T. (2017). Linear Discrete-Time Systems, CRC Press/Taylor & Francis Group.10.1201/9781138039629 ↗
44. Gruyitch, L. (2013). Advances in the Linear Dynamic Systems Theory, Llumina Press.
45. Gruyitch, L. (2017). Linear Continuous-Time Systems, CRC Press.10.1201/9781315116556 ↗
46. Fuzzy modelling and control of multilayer incinerator10.1016/0165-0114(86)90010-2 ↗
47. Wang, H., Tanaka, K., and Griffin, M. (1995, January 20–24). Parallel distributed compensation of nonlinear systems by Takagi-Sugeno fuzzy model. Proceedings of the 1995 IEEE International Conference on Fuzzy Systems, Yokohama, Japan.
48. Stability analysis and design of fuzzy control systems10.1016/0165-0114(92)90113-I ↗
49. Analysis and Synthesis of Feedback Control Systems in the Parameter Plane I-Linear Continuous Systems10.1109/TAI.1964.5407721 ↗
50. Analysis and Synthesis of Feedback Control Systems in the Parameter Plane II-Sampled-Data Systems10.1109/TAI.1964.5407722 ↗
51. Grujić, L.T. (1991). Discrete Systems (In Serbian), Faculty of Mechanical Engineering.
52. Poularikas, A. (2018). Transforms and Applications Handbook, CRC Press. Electrical Engineering Handbook.10.1201/9781315218915 ↗