journal article·2022-09-01Open access

An Evolutionary Algorithmic Approach for Improving the Success Rate of Selective Assembly through a Novel EAUB Method

Siva Kumar Mahalingam, Lenin Nagarajan, Chandran Velu, Vignesh Kumar Dharmaraj, Sachin Salunkhe, Hussein Mohamed Abdelmoneam Hussein

Applied Sciences· Volume 12· Issue 17

Abstract

This work addresses an evolutionary algorithmic approach to reduce the surplus pieces in selective assembly to increase success rates. A novel equal area amidst unequal bin numbers (EAUB) method is proposed for classifying the parts of the ball bearing assembly by considering the various tolerance ranges of parts. The L16 orthogonal array is used for identifying the effectiveness of the proposed EAUB method through varying the number of bins of the parts of an assembly. Because of qualities such as minimal setting parameters, ease of understanding and implementation, and rapid convergence, the moth–flame optimization (MFO) algorithm is put forward in this work for identifying the optimal combination of bins of the parts of an assembly toward maximizing the percentage of the success rate of making assemblies. Computational results showed a 5.78% improvement in the success rate through the proposed approach compared with the past literature. The usage of the MFO algorithm is justified by comparing the computational results with the harmony search algorithm.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Manufacturing Process and Optimization · Industrial Vision Systems and Defect Detection · Product Development and Customization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai 600 062, Tamil Nadu, India

Department of Automobile Engineering, Velammal Engineering College, Chennai 600 066, Tamil Nadu, India

Department of Mechanical Engineering, National Engineering College, Kovilpatti 628 503, Tamil Nadu, India

Mechanical Engineering Department, Faculty of Engineering and Technology, Future University in Egypt, New Cairo 11835, Egypt

Mechanical Engineering Department, Faculty of Engineering, Helwan University, Cairo 11732, Egypt

References (26)

Show source-provided references
1. Kern, D.C. (2003). Forecasting Manufacturing Variation Using Historical Process Capability Data: Applications for Random Assembly, Selective Assembly, and Serial Processing. [Ph.D. Dissertation, Massachusetts Institute of Technology, Department of Mechanical Engineering].
2. A New Method in Selective Assembly to Minimize Clearance Variation for a Radial Assembly Using Genetic Algorithm10.1080/08982110500225398 ↗
3. A new algorithm for minimizing surplus parts in selective assembly by using genetic algorithm10.1080/00207540600810085 ↗
4. Optimization of clearance variation in selective assembly for components with multiple characteristics10.1007/s00170-007-1136-3 ↗
5. Particle swarm optimization for minimizing assembly variation in selective assembly10.1007/s00170-008-1638-7 ↗
6. A new method in selective assembly for components with skewed distributions
7. Wang, W., Li, D., and Chen, J. (2011, January 15–17). Minimizing assembly variation in selective assembly for complex assemblies using genetic algorithm. Proceedings of the 2011 Second International Conference on Mechanic Automation and Control Engineering, Hohhot, China.
8. Optimal process design in selective assembly when components with smaller variance are manufactured at three shifted means10.1080/00207541003604851 ↗
9. Genetic algorithm to optimize manufacturing system efficiency in batch selective assembly10.1007/s00170-011-3326-2 ↗
10. A heuristic algorithm to minimize clearance variation in selective assembly
11. Tolerance modelling in selective assembly for minimizing linear assembly tolerance variation and assembly cost by using Taguchi and AIS algorithm10.1007/s00170-014-6097-8 ↗
12. A Bernoulli Model of Selective Assembly Systems10.3182/20140824-6-ZA-1003.00525 ↗
13. A selective assembly strategy to improve the components’ utilization rate with an application to hard disk drives10.1007/s00170-014-6106-y ↗
14. An approach to minimizing surplus parts in selective assembly with genetic algorithm10.1177/0954405414530896 ↗
15. Modelling in selective assembly with symmetrical interval-based Taguchi loss function for minimising assembly loss and clearance variation10.1504/IJMTM.2015.071223 ↗
16. Selective Assembly System with Unreliable Bernoulli Machines and Finite Buffers10.1109/TASE.2016.2604371 ↗
17. Determining the Number of Groups in Selective Assembly for Remanufacturing Engine10.1016/j.proeng.2017.01.227 ↗
18. The method of selective assembly for the RV reducer based on genetic algorithm10.1177/0954406217700179 ↗
19. Comparison of clearance variation using Selective assembly and metaheuristic Approach
20. A Multistage Approach to the Selective Assembly of Components without Dimensional Distribution Assumptions10.1115/1.4039767 ↗
21. Assembly quality evaluation for linear axis of machine tool using data-driven modeling approach10.1007/s10845-020-01666-y ↗
22. Moth-flame optimization algorithm: A novel nature-inspired heuristic paradigm10.1016/j.knosys.2015.07.006 ↗
23. Li, X., Zhang, X., Yin, M., and Wang, J. (2015, January 25–28). A genetic algorithm for the distributed assembly permutation flowshop scheduling problem. Proceedings of the 2015 IEEE Congress on Evolutionary Computation (CEC), Sendai, Japan.10.1109/CEC.2015.7257275 ↗
24. Animal migration optimization: An optimization algorithm inspired by animal migration behavior10.1007/s00521-013-1433-8 ↗
25. Design of a reconfigurable antenna array with discrete phase shifters using differential evolution algorithm10.2528/PIERB11032902 ↗
26. Multi-search differential evolution algorithm10.1007/s10489-016-0885-9 ↗