Mechanical Properties and Torque/Force Generation of XP-Endo Shaper, Trunatomy, Spring Endo File, and Spring Endo Heated Finish File, Part 1
Source abstract
Abstract
We evaluated the mechanical properties and torque/force generated during canal shaping by four NiTi files with innovative designs. Each of the 52 TruNatomy Prime, XP-endo Shaper, Spring Endo files with unheated finish (Spring Endo), and Spring Endo files with heated finish (Spring H) were subjected to bending, buckling, cyclic fatigue, and torsional resistance tests (n = 10 per NiTi file type). Canal shaping was simulated with J-shaped resin blocks (n = 10). Phase transformation behavior was investigated using differential scanning calorimetry (n = 2). Statistical analysis was performed by one-way ANOVA and the Games-Howell test. Spring Endo and Spring H files showed higher bending and buckling resistances, ultimate torsional strength, and elastic modulus than TruNatomy and XP-endo Shaper (p < 0.05). XP-endo Shaper demonstrated the highest cyclic fatigue resistance and angle of rotation to fracture (p < 0.05). The elastic modulus increased in the order of XP-endo Shaper, TruNatomy Prime, Spring H, and Spring Endo. During simulated canal shaping, XP-endo Shaper generated greater clockwise torque and less screw-in force compared to Spring Endo files, with superior cutting ability. TruNatomy Prime generated the least clockwise torque and screw-in force. At room temperature, TruNatomy and XP-endo Shaper files consisted of mixed phases of austenite, martensite, and R-phase; Spring H files consisted of martensite; and Spring Endo files consisted of austenite.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Endodontics and Root Canal Treatments · Dental materials and restorations · Surgical Sutures and Adhesives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Conservative Dentistry, Kyung Hee University College of Dentistry, Kyung Hee University Medical Center, Seoul 02447, Korea
Ilsanstar 28 Dental Clinic, Goyang 10401, Korea
Funding
National Research Foundation of the Republic of Korea · Kyung Hee University in 2021
References (34)
Show source-provided references
1. Canal preparation with Hero 642 rotary Ni-Ti instruments compared with stainless steel hand K-file assessed using computed tomography10.1111/j.1365-2591.2005.00961.x ↗
2. Bürklein, S., Zupanc, L., Donnermeyer, D., Tegtmeyer, K., and Schäfer, E. (2021). Effect of core mass and alloy on cyclic fatigue resistance of different nickel-titanium endodontic instruments in matching artificial canals. Materials, 14.10.3390/ma14195734 ↗
3. Ahn, S., Ha, J.H., Kwak, S.W., and Kim, H.C. (2020). Advancement of mechanical properties of nickel-titanium rotary endodontic instruments by spring machining on the file shaft. Materials, 13.10.3390/ma13225246 ↗
4. Mechanical properties of controlled memory and superelastic nickel-titanium wires used in the manufacture of rotary endodontic instruments10.1016/j.joen.2012.07.006 ↗
5. Metallurgical characterization of controlled memory wire nickel-titanium rotary instruments10.1016/j.joen.2011.08.005 ↗
6. Various heat-treated nickel-titanium rotary instruments evaluated in S-shaped simulated resin canals10.1016/j.jds.2016.04.006 ↗
7. New thermomechanically treated NiTi alloys—A review10.1111/iej.12924 ↗
8. Cyclic and torsional fatigue resistance of XP-endo Shaper and TRUShape instruments10.1016/j.joen.2017.08.033 ↗
9. Evaluating in vitro performance of novel nickel-titanium rotary system (TruNatomy) based on debris extrusion and preparation time from severely curved canals10.1016/j.joen.2021.03.003 ↗
10. Qualitative assessment of the surface topographic changes of XP-endo Shaper and TruNatomy files after exposure to sodium hypochlorite and ethylenediaminetetraacetic acid
11. Falakaloğlu, S., Silva, E., Yeniçeri Özata, M., and Gündoğar, M. (2022). Shaping ability of different NiTi rotary systems during the preparation of printed mandibular molars. Aust. Endod. J., in press.10.1111/aej.12649 ↗
12. The impact of minimally invasive root canal preparation strategies on the ability to shape root canals of mandibular molars10.1111/iej.13384 ↗
13. Evaluation of XP-endo Shaper, Reciproc Blue, and ProTaper Universal NiTi systems on dentinal microcrack formation using micro-computed tomography10.1016/j.joen.2018.12.005 ↗
14. In vitro comparison of cyclic fatigue resistance of TruNatomy in single and double curvature canals compared with different nickel-titanium rotary instruments10.1186/s12903-020-1027-7 ↗
15. Numeric evaluation of innovate spring machined nickel-titanium rotary instruments: A 3-dimensional finite element study10.1016/j.joen.2020.10.015 ↗
16. (2021, September 01). Spring Endo File. Available online: https://denflex.kr/eng/bbs/content.php?co_id=b_1en.
17. (2019). Root-Canal Instruments—Part 1: General Requirements and Test Methods. Standard No. International Standard ISO 3630-1: 2019(E).
18. Torsion and bending properties of shape memory and superelastic nickel-titanium rotary instruments10.1016/j.joen.2012.08.010 ↗
19. Cyclic fatigue testing of nickel-titanium endodontic instruments10.1016/S0099-2399(97)80250-6 ↗
20. Geometric optimization for development of glide path preparation nickel-titanium rotary instrument10.1016/j.joen.2015.01.025 ↗
21. Torsional resistance of three ProTaper rotary systems10.1186/s12903-019-0820-7 ↗
22. A study of electrical-resistivity, internal-friction and shear modulus on an aged TI49NI51 alloy10.1016/0956-7151(90)90137-6 ↗
23. Comparison of cyclic fatigue resistance of WaveOne and WaveOne Gold Small, Primary, and Large instruments10.1016/j.joen.2016.11.021 ↗
24. Cyclic fatigue resistance and three-dimensional analysis of instruments from two nickel-titanium rotary systems10.1111/j.1365-2591.2006.01143.x ↗
25. Comparison of the torsional resistance of 4 different glide path instruments10.1016/j.joen.2021.02.009 ↗
26. Influence of heat treatment on torsional resistance and surface roughness of nickel-titanium instruments10.1111/iej.13164 ↗
27. Mechanical behavior of pathfinding endodontic instruments10.1016/j.joen.2012.05.005 ↗
28. Ledge formation: Review of a great challenge in endodontics10.1016/j.joen.2007.07.015 ↗
29. Evaluation of design, metallurgy, microhardness, and mechanical properties of glide path instruments: A multimethod approach10.1016/j.joen.2021.09.003 ↗
30. Torsional resistance of XP-endo Shaper at body teperature compared with several nickel-titanium rotary instruments10.1111/iej.12815 ↗
31. 3-dimensional ability assessment in removing root filling material from pair-matched oval-shaped canals using thermal-treated Instruments10.1016/j.joen.2019.06.003 ↗
32. Comparative analysis of mechanical properties of differently tapered nickeltitanium endodontic rotary instruments10.4012/dmj.2017-312 ↗
33. Influence of rotational speed on torque/force generation and shaping ability during root canal instrumentation of extracted teeth with continuous rotation and optimum torque reverse motion10.1111/iej.13485 ↗
34. Merima, B., Ivona, B., Dubravka, M., Gianluca, P., and Ivica, A. (2022). Surface roughness and cyclic fatigue resistance of reciprocating and novel rotary instruments after use in curved root canals. Aust. Endod. J., in press.10.1111/aej.12627 ↗