journal article·2022-11-05Open access

Research on the Processing of Microstructures on Silicon Carbide Surfaces Using a Blowing-Assisted Nanosecond Laser

Suorong Zhang, Jian Li, Bin He, Jian Yuan, Guoyan Chen

Applied Sciences· Volume 12· Issue 21

Abstract

The properties of high strength, wear resistance, and high brittleness, make silicon carbide (SiC) materials difficult to process by traditional processing methods. The non-traditional processing method of laser processing has emerged as a viable means of processing silicon carbide materials, as it is very suitable for processing hard and brittle materials, and has the additional advantages of no tool wear, no cutting force, and high processing efficiency. However, in conventional laser processing of silicon carbide, oxidation products occur in the processing area, which can hinder the further removal of the material. To avoid the accumulation of oxidation products and improve the laser processing of the groove structure on the silicon carbide surface, a blowing-assisted laser processing method is proposed by this paper. Comparison experiments between conventional and blowing-assisted laser processing were conducted, in which groove structures of different depths and widths were processed. Two models were established based on the experimental results to explain the material removal process. Finally, the array microgroove structures were successfully processed by blowing-assisted laser processing, verifying the feasibility of improving the laser processing capability of microstructures on silicon carbide surfaces with the assistance of blowing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Jiangsu University of Technology, Changzhou 213001, China

References (24)

Show source-provided references
1. Tribological behavior of silicon carbide ceramics—A review10.4191/kcers.2016.53.6.581 ↗
2. Ultra-high-speed hybrid ceramic triboelectric bearing with real-time dynamic instability monitoring10.1016/j.nanoen.2022.107759 ↗
3. High-performance grinding of a 2-m scale silicon carbide mirror blank for the space-based telescope10.1007/s00170-016-9107-1 ↗
4. The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity10.1016/j.ijmachtools.2019.01.003 ↗
5. Optical properties of silicon carbide polytypes below and around bandgap10.1016/j.tsf.2003.11.291 ↗
6. Spherical mirror and surface patterning on silicon carbide (SiC) by material removal rate enhancement using CO2 laser assisted polishing10.1007/s12541-019-00304-9 ↗
7. Machining processes of silicon carbide: A review
8. Advances in laser-assisted machining of hard and brittle materials10.1016/j.jmapro.2020.08.034 ↗
9. Laser machining of structural ceramics—A review10.1016/j.jeurceramsoc.2008.11.010 ↗
10. Review of laser microscale processing of silicon carbide10.2351/1.3562522 ↗
11. High-efficiency machining of silicon carbide Fresnel micro-structure based on improved laser scanning contour ablation method with continuously variable federate10.1016/j.ceramint.2020.09.278 ↗
12. Effect of the surface microstructure ablated by femtosecond laser on the bonding strength of EBCs for SiC/SiC composites10.1016/j.optcom.2018.04.055 ↗
13. Fiber laser cutting of CFRP laminates with single-and multi-pass strategy: A feasibility study10.1016/j.optlastec.2018.06.025 ↗
14. Ultrafast laser micromachining of 3C-SiC thin films for MEMS device fabrication10.1007/s00170-007-1223-5 ↗
15. Dong, Y.Y., Nair, R., Molian, R., and Molian, P. (2008). Femtosecond-pulsed laser micromachining of a 4H–SiC wafer for MEMS pressure sensor diaphragms and via holes. J. Micromech. Microeng., 035022.10.1088/0960-1317/18/3/035022 ↗
16. Laser ablation behavior and mechanism of C/SiC composite10.1016/j.ceramint.2013.02.012 ↗
17. Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser10.1016/j.apsusc.2019.144131 ↗
18. Influence of laser parameters on processing microgrooves of 2.5-dimensional C/SiC composites via nanosecond laser10.1007/s00170-021-07318-6 ↗
19. Micro-structuring silicon compound ceramics using nanosecond pulsed laser assisted by hydrothermal reaction10.1016/j.jmapro.2019.12.005 ↗
20. Optimization of near-infrared laser drilling of silicon carbide under water10.1016/j.ijheatmasstransfer.2013.12.046 ↗
21. Fabrication of through holes in silicon carbide using femtosecond laser irradiation and acid etching10.1016/j.apsusc.2013.11.030 ↗
22. Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics10.1016/j.ijmachtools.2009.07.007 ↗
23. Overview on the development and critical issues of water jet guided laser machining technology10.1016/j.optlastec.2020.106820 ↗
24. Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process10.1016/j.mssp.2018.03.035 ↗