Constraints of Using Conductive Screen-Printing for Chipless RFID Tags with Enhanced RCS Response
Source abstract
Abstract
The analysis and experimental verification of the properties of four types of chipless RFID tags with an increased RCS response level designed and fabricated by conductive screen-printing using silver paste on foil and paper substrates was performed. The analytical formula for the quality factor of microstrip structures with a reduced conductivity of the metal layers was used to predict the changes and detectability of the backscattered RCS response. The analysis provides insight into the limitations and outlines the possibilities of chipless structures screen-printed on foil and paper substrates, which can be of significant benefit to further reducing the cost, and to speed up the production of these tags for identification and sensing purposes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: RFID technology advancements · Modular Robots and Swarm Intelligence · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electromagnetic Field, Faculty of Electrical Engineering, Czech Technical University in Prague, Technicka 2, 166 27 Prague, Czech Republic
Funding
Ministry of Education, Youth and Sports of the Czech Republic · COST—European Cooperation in Science and Technology
References (37)
Show source-provided references
1. Finkenzeller, K. (2005). RFID Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification, John Wiley & Sons. [2nd ed.].
2. Small and flexible metal mountable passive UHF RFID tag on high-dielectric polymer-ceramic composite substrate10.1109/LAWP.2012.2227291 ↗
3. RFID antennas for the UHF remote monitoring of human subjects10.1109/TAP.2007.898626 ↗
4. Two novel extremely low-profile slot-couplet two-element patch antennas for UHF RFID of people10.1002/mop.24894 ↗
5. Novel low-profile foam dielectric over-the-shoulder antenna based on coupled patches technique10.1002/mop.27389 ↗
6. Passive UHF RFID antennas for sensing applications: Principles, methods and classifications10.1109/MAP.2013.6781700 ↗
7. Implantable semi-active UHF RFID tag with inductive wireless power transfer10.1109/LAWP.2016.2520663 ↗
8. Europe and the Future for WPT COST Action IC1301 Team
9. RFID Passive gas sensor integrating carbon nanotubes10.1109/TMTT.2011.2163416 ↗
10. Tag, you’re it radar cross section of chipless RFID tags10.1109/MMM.2016.2549160 ↗
11. A fully printable chipless RFID tag with detuning correction technique10.1109/LMWC.2012.2188785 ↗
12. Toward RCS magnitude level coding for chipless RFID10.1109/TMTT.2016.2562625 ↗
13. Improvement in robustness and recognizability of RCS response of U-shaped strip-based chipless RFID tags10.1109/LAWP.2016.2549638 ↗
14. Polivka, M., Svanda, M., and Machac, J. (2014, January 6–9). Chipless RFID tag with an improved rcs response. Proceedings of the European Microwave Week 2014 (44th EuMC, EuRAD, EuMIC, EuWT) [CD-ROM], Rome, Italy.10.1109/EuMC.2014.6986548 ↗
15. Chipless RFID tag based on electrically small spiral capacitively loaded dipole10.1109/LAWP.2017.2760059 ↗
16. A compact dual-polarized chipless RFID tag by using nested concentric square loops10.1109/LAWP.2016.2618928 ↗
17. High-Performance chipless radio-frequency identification tags: Using a slow-wave approach for miniaturized structure10.1109/MAP.2019.2920664 ↗
18. A chipless RFID based on multiresonant high-impedance surfaces10.1109/TMTT.2012.2227777 ↗
19. Scalar method for reading of chipless rfid tags based on limited ground plane backed dipole resonator array10.1109/TMTT.2019.2918287 ↗
20. Orientation-insensitive and normalization-free reading chipless rfid system based on circular polarization interrogation10.1109/TAP.2019.2949417 ↗
21. Circular slot antenna array printed on 3d textile substrate
22. RFID tag and rf structures on a paper substrate using inkjet-printing technology10.1109/TMTT.2007.909886 ↗
23. Inkjet printing of multilayer millimeter-wave yagi-uda antennas on flexible substrates10.1109/LAWP.2015.2434823 ↗
24. Inkjet-printed microstrip patch antennas realized on textile for wearable applications10.1109/LAWP.2013.2295942 ↗
25. Printable planar dielectric antennas10.1109/TAP.2015.2502265 ↗
26. Screen Printed HF RFID Antennas on Polyethylene Terephthalate Film10.1109/JRFID.2019.2905418 ↗
27. Balanis, C.A. (1997). Antenna Theory, Analysis and Design, John Wiley & Sons, Inc.. [2nd ed.].
28. Quality factor of an electrically small antenna radiating close to a conducting plane10.1109/8.929637 ↗
29. Improving performance properties of a dipole element closely spaced to a PEC ground plane10.1109/LAWP.2004.840722 ↗
30. Radiation Q bounds for small electric dipoles over a conducting ground plane10.1109/TAP.2013.2297162 ↗
31. The radiation Q factor of a horizontal λ/2 dipole above ground plane10.1109/LAWP.2014.2329421 ↗
32. Volakis, J.L. (2007). Microstrip antennas. Antenna Engineering Handbook, McGraw Hill.
33. Platform tolerant, high encoding capacity dipole array-plate chipless RFID tags10.1109/ACCESS.2019.2935258 ↗
34. Chipless RFID tag with an improved magnitude and robustness of RCS response10.1002/mop.30321 ↗
35. Chipless RFID tag with enhanced RCS used as phthalocyanine chemical gas sensor10.1109/LAWP.2020.3009453 ↗
36. Ayadi, H., Machac, J., Svanda, M., Boulejfen, N., and Latrach, L. (2022). Proof-of-Concept of Reconfigurable Solvent Vapors Sensor Tag with Wireless Power Transfer for IoT Applications. Appl. Sci., 12.10.3390/app122010266 ↗
37. (2022, March 10). Model DRH20—Double Ridge Waveguide Horn. RFspin s.r.o. Available online: http://www.rfspin.cz/en/antennas/drh20.php.