Study on Impact Process of a Large LNG Tank Container for Trains
Source abstract
Abstract
In this paper, the impact process of a large LNG tank container for trains was studied by performing experiments and numerical simulations. Impact force with induced stress and deformation on the container especially on the frame was investigated and LNG sloshing inside the container was simulated. Experimental results show that for the initial velocity of 6.1 km/h, the maximum compressive stress is −366.3 MPa occurring on the longitudinal beam near the impact side corner fittings. The impact force produced by the transport vehicle is influenced by both the initial clearance and initial velocity, i.e., its maximum value increases with the clearance or velocity, which in turn directly affects the LNG impact force on the head, the tank container axial acceleration at the mass center and the frame deformation and stress distribution. The largest average pressure brought on by the LNG impact force is 8.83% of the design pressure, the inner vessel should be designed with a thickness allowance. When the initial velocity is 8 km/h, the ratio of the maximum LNG impact force to the static inertia force at each clearance is less than 0.23, which means that the calculation method of LNG static inertia force is conservative. In addition, the maximum axial acceleration of the tank container can reach 63 m/s2, greater than 4g inertial acceleration specified in the container design standard, meaning if assessed by the impact, the specifications of the standard are not conservative.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics Simulations and Interactions · Spacecraft and Cryogenic Technologies · Structural Integrity and Reliability Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
Beijing Tianhai Cryogenic Equipment Co., Ltd., Beijing 101109, China
References (28)
Show source-provided references
1. Investigation of sloshing damping in baffled rectangular tanks subjected to the dynamic excitation10.1007/s10518-009-9168-8 ↗
2. Sloshing in a three-dimensional rectangular tank: Numerical simulation and experimental validation10.1016/j.oceaneng.2005.11.001 ↗
3. Fluid–structure interaction of water filled tanks during the impact with the ground10.1016/j.ijimpeng.2003.12.005 ↗
4. A comparative study of numerical simulations for fluid–structure interaction of liquid-filled tank during ship collision10.1016/j.oceaneng.2006.06.001 ↗
5. A new ALE formualtion for sloshing analysis10.12989/sem.2003.16.4.423 ↗
6. Experimental study of liquid sloshing dynamics in a barge carrying tank10.1016/j.fluiddyn.2008.02.001 ↗
7. A numerical study of three-dimensional liquid sloshing in tanks10.1016/j.jcp.2007.12.006 ↗
8. Influence of baffle position on liquid sloshing, during braking and turning of a tank truck10.1631/jzus.A0900521 ↗
9. Dynamic response of flexible container during the impact with the ground10.1016/j.ijimpeng.2010.05.001 ↗
10. Assessment of breaking waves and liquid sloshing impact10.1007/s11071-020-05605-7 ↗
11. Effect of the vertical baffle height on the liquid sloshing in a three-dimensional rectangular tank10.1016/j.oceaneng.2012.01.034 ↗
12. Investigations on sloshing mitigation using elastic baffles by coupling smoothed finite element method and decoupled finite particle method10.1016/j.jfluidstructs.2020.102942 ↗
13. Simulation of high velocity impact in fluid-filled containers using finite elements with adaptive coupling to smoothed particle hydrodynamics10.1016/j.ijimpeng.2010.10.023 ↗
14. Non-linear coupled slosh dynamics of liquid-filled laminated composite containers: A two dimensional finite element approach10.1016/S0022-460X(02)01011-8 ↗
15. Simulation of the drop impact test for moulded thermoplastic containers10.1016/S0734-743X(99)00148-7 ↗
16. Sloshing of liquid in partially liquid filled toroidal tank with various baffles under lateral excitation10.1016/j.oceaneng.2017.09.032 ↗
17. Dynamic FEA modelling of ISO tank containers10.1016/S0924-0136(02)00196-6 ↗
18. A new non-linear approach to analysing the dynamic behaviour of tank vehicles subjected to liquid sloshing
19. Sloshing impact simulation with material point method and its experimental validations10.1016/j.compfluid.2014.07.025 ↗
20. Experimental study on characteristic of sloshing impact load in elastic tank with low and partial filling under rolling coupled pitching10.1016/j.ijnaoe.2019.10.003 ↗
21. Numerical simulation of sloshing flows with impact load10.1016/S0141-1187(00)00021-3 ↗
22. Perforation Tests of Aluminum Alloy Specimens for a Wide Range of Temperatures Using High-Performance Thermal Chamber-Experimental and Numerical Analysis10.1088/1757-899X/491/1/012027 ↗
23. Influence of projectile shape on dynamic behavior of steel sheet subjected to impact and perforation10.1016/j.tws.2013.01.003 ↗
24. Experimental and numerical analysis of the aluminum alloy AW5005 behavior subjected to tension and perforation under dynamic loading10.15632/jtam-pl.55.4.1219 ↗
25. Song, T.T. (2011). Research on Q450NQR1 High Strength Sheet Metal forming Springback and Application of Shallow Drawing. [Diploma Thesis, Shandong University].
26. A novel method to estimate the fracture toughness of pressure vessel ferritic steels in the ductile to brittle transition region using finite element analysis and Master Curve method10.1016/j.ijpvp.2019.103949 ↗
27. Han, Y. (2012). Study on Technique of Cold Stretched Austenitic Stainless Steel Pressure Vessle and Its Performance Evaluation in Typical Media Environment. [Diploma Thesis, Hefei University of Technology].
28. Mi, L. (2014). Research on Numerical Simulation of Impact Test on Railway Vehicles. [Diploma Thesis, Beijing Jiaotong University].