journal article·2024-05-09Open access

Fault-Tolerant Multiport Converter for Hybrid Distribution Systems: Configuration, Control Principles and Fault Analysis

Simone Negri, Giovanni Ubezio, Roberto Sebastiano Faranda

Applied Sciences· Volume 14· Issue 10

Abstract

Multiport converters (MCs) are widely adopted in many applications, from renewable energy sources and storage integration to automotive applications and distribution systems. They are used in order to interface different energy sources, storage devices and loads with one single, simple converter topology in contrast to the traditional approach, which can require different solutions made by two-port converters. MCs allow for a reduction in the number of components and cascaded conversion stages with respect to an equivalent system of two-port converters, resulting in reduced complexity, dimensions and costs, as well as in improved reliability and enhanced efficiency. Nevertheless, some aspects related to the design of MCs are still worth further discussion when MCs are applied to hybrid AC/DC distribution systems. First, most converters are developed for one specific application and are not modular in structure. Furthermore, many of the proposed solutions are not equally suitable for AC and DC applications and they can introduce significant issues in hybrid distribution systems, with earthing management being particularly critical. Even though most available solutions offer satisfying steady-state and dynamic performances, fault behavior is often not considered and the possibility of maintaining controllability during faults is overlooked. Building on these three aspects, in this paper, a new MC for hybrid distribution systems is presented. An innovative circuit topology integrating three-phase AC ports and three-wire DC ports and characterized by a unique connection between the AC neutral wire and the DC midpoint neutral wire is presented. Its control principles and properties during external faults are highlighted, and extensive numerical simulations support the presented discussion.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microgrid Control and Optimization · Multilevel Inverters and Converters · Advanced DC-DC Converters

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, 20133 Milan, Italy

E.C & C. srl, 23889 Santa Maria Hoè, Italy

Dipartimento di Energia, Politecnico di Milano, 20121 Milan, Italy

References (64)

Show source-provided references
1. Multi-input DC/DC converters in connection with distributed generation units—A review10.1016/j.rser.2016.07.023 ↗
2. Multiinput DC–DC converters in renewable energy applications—An overview10.1016/j.rser.2014.08.033 ↗
3. A review of topologies of three-port DC–DC converters for the integration of renewable energy and energy storage system10.1016/j.rser.2015.11.079 ↗
4. Review of grid integration schemes for renewable power generation system10.1016/j.rser.2014.03.034 ↗
5. Multiport Power Electronic Interface—Concept, Modeling, and Design10.1109/TPEL.2010.2093583 ↗
6. Dynamic Behavior of Multiport Power Electronic Interface Under Source/Load Disturbances10.1109/TIE.2012.2210376 ↗
7. Corti, M., Tironi, E., and Ubezio, G. (2016, January 22–24). Multi-port converters in smart grids: Protection selectivity. Proceedings of the 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Anacapri, Italy.10.1109/SPEEDAM.2016.7526017 ↗
8. New Single-Stage Single-Phase Three-Input DC-AC Boost Converter for Stand-Alone Hybrid PV/FC/UC Systems10.1016/j.epsr.2015.05.008 ↗
9. Soft-switched non-isolated high step-up multi-port DC-DC converter for hybrid energy system with minimum number of switches10.1016/j.ijepes.2018.10.038 ↗
10. Negri, S., Tironi, E., and Ubezio, G. (2018, January 12–15). Local DC Distribution System in Presence of RES and Storage Devices: Multiport Converters Application. Proceedings of the 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe), Palermo, Italy.10.1109/EEEIC.2018.8493991 ↗
11. Control and Fault Analysis of Multiport Converters for Low Voltage DC Distribution Systems10.1016/j.ijepes.2020.106335 ↗
12. An Isolated Three-Port Bidirectional DC-DC Converter with Decoupled Power Flow Management10.1109/TPEL.2008.2002056 ↗
13. Schäfer, J., Bortis, D., and Kolar, J.W. (2017, January 9–12). Multi-port multi-cell DC/DC converter topology for electric vehicle’s power distribution networks. Proceedings of the 2017 IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL), Stanford, CA, USA.10.1109/COMPEL.2017.8013326 ↗
14. PWM Plus Phase Angle Shift (PPAS) Control Scheme for Combined Multiport DC/DC Converters10.1109/TPEL.2011.2163826 ↗
15. Analysis and Design of a Multiport Converter Using a Magnetic Coupling Inductor Technique10.1109/TIA.2014.2354401 ↗
16. An Interleaved Half-Bridge Three-Port Converter with Enhanced Power Transfer Capability Using Three-Leg Rectifier for Renewable Energy Applications10.1109/JESTPE.2015.2478140 ↗
17. A multiple source DC/DC converter topology10.1016/j.ijepes.2013.02.020 ↗
18. PV Isolated Three-Port Converter and Energy-Balancing Control Method for PV-Battery Power Supply Applications10.1109/TIE.2015.2393831 ↗
19. Dual-Transformer-Based Asymmetrical Triple-Port Active Bridge (DT-ATAB) Isolated DC–DC Converter10.1109/TIE.2017.2674586 ↗
20. An Integrated Four-Port DC/DC Converter for Renewable Energy Applications10.1109/TPEL.2010.2043119 ↗
21. A Family of Multiport Buck–Boost Converters Based on DC-Link-Inductors (DLIs)10.1109/TPEL.2014.2307883 ↗
22. Tironi, E., Corti, M., and Ubezio, G. (2015, January 16–18). A novel approach in multi-port DC/DC converter control. Proceedings of the 2015 International Conference on Clean Electrical Power (ICCEP), Taormina, Italy.10.1109/ICCEP.2015.7177599 ↗
23. DC Networks Including Multiport DC/DC Converters: Fault Analysis10.1109/TIA.2016.2572045 ↗
24. Multiport Converters Based on Integration of Full-Bridge and Bidirectional DC–DC Topologies for Renewable Generation Systems10.1109/TIE.2013.2254096 ↗
25. Negri, S., Tironi, E., and Ubezio, G. (2019, January 23–27). Zonal DC Distribution System based on Multiport Converters: Fault Analysis and Protection Design. Proceedings of the 2019 IEEE Milan PowerTech, Milan, Italy.10.1109/PTC.2019.8810721 ↗
26. Combined model predictive control and ANN-based forecasters for jointly acting renewable self-consumers: An environmental and economical evaluation10.1016/j.renene.2022.07.065 ↗
27. Negri, S., Tironi, E., and Danna, D.S. (2017, January 6–9). Integrated control strategy for islanded operation in smart grids: Virtual inertia and ancillary services. Proceedings of the 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe), Milan, Italy.10.1109/EEEIC.2017.7977725 ↗
28. La Bella, A., Negri, S., Scattolini, R., and Tironi, E. (2018, January 21–24). A Two-Layer Control Architecture for Islanded AC Microgrids with Storage Devices. Proceedings of the 2018 IEEE Conference on Control Technology and Applications (CCTA), Copenhagen, Denmark.10.1109/CCTA.2018.8511375 ↗
29. A Novel Single-Input Dual-Output Three-Level DC–DC Converter10.1109/TIE.2018.2807384 ↗
30. An Integrated Three-Port Bidirectional DC–DC Converter for PV Application on a DC Distribution System10.1109/TPEL.2012.2236580 ↗
31. A Gallium-Nitride-Device-Based Switched Capacitor Multiport Multilevel Converter for UPS Applications10.1109/TPEL.2016.2629283 ↗
32. Double-Input DC–DC Power Electronic Converters for Electric-Drive Vehicles—Topology Exploration and Synthesis Using a Single-Pole Triple-Throw Switch10.1109/TIE.2009.2032762 ↗
33. A Modular Multiport Power Electronic Transformer with Integrated Split Battery Energy Storage for Versatile Ultrafast EV Charging Stations10.1109/TIE.2014.2367237 ↗
34. Modeling, Control, and Seamless Transition of the Bidirectional Battery-Driven Switched Reluctance Motor/Generator Drive Based on Integrated Multiport Power Converter for Electric Vehicle Applications
35. Multiport High-Power LCL DC Hub for Use in DC Transmission Grids10.1109/TPWRD.2013.2280759 ↗
36. Power balancing control of a multi-terminal DC constructed by multiport front-to-front DC–DC converters10.1049/iet-gtd.2016.0674 ↗
37. DC Interference Modeling for Assessing the Impact of Sustained DC Ground Faults of Photovoltaic Systems on Third-Party Infrastructure10.1109/TIE.2018.2844841 ↗
38. Common-Mode and RF EMI in a Low-Voltage DC Distribution Network with a PWM Grid-Tie Rectifying Converter10.1109/TSG.2016.2602845 ↗
39. Candeletti, F., Tironi, E., Carminati, M., and Ragaini, E. (2018, January 13–16). LVDC microgrid with double ac grid interface: Protection against dc ground faults and control strategies. Proceedings of the 2018 18th International Conference on Harmonics and Quality of Power (ICHQP), Ljubljana, Slovenia.10.1109/ICHQP.2018.8378901 ↗
40. VSC-based LVDC distribution network with DERs: Equivalent circuits for leakage and ground fault currents evaluation10.1016/j.renene.2021.05.148 ↗
41. LVDC rules—Technical specifications for public LVDC distribution network10.1049/oap-cired.2017.0519 ↗
42. Galvanic Isolation and Output LC Filter Design for the Low-Voltage DC Customer-End Inverter10.1109/TSG.2014.2316676 ↗
43. Multiterminal DC Wind Farm Collection Grid Internal Fault Analysis and Protection Design10.1109/TPWRD.2010.2044813 ↗
44. On the Bipolar MMC-HVDC Topology Suitable for Bulk Power Overhead Line Transmission: Configuration, Control, and DC Fault Analysis10.1109/TPWRD.2014.2352313 ↗
45. Analysis of Short-Circuit Current Characteristics and Its Distribution of Artificial Grounding Faults on DC Transmission Lines10.1109/TPWRD.2017.2732483 ↗
46. DC Distribution Fault Analysis, Protection Solutions, and Example Implementations10.1109/TIA.2018.2825437 ↗
47. Carminati, M., Ragaini, E., and Tironi, E. (2015, January 10–13). DC and AC ground fault analysis in LVDC microgrids with energy storage systems. Proceedings of the 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC), Rome, Italy.10.1109/EEEIC.2015.7165309 ↗
48. Fault Analysis and Protection of a Series-DC Collection and Transmission System10.1109/TIA.2018.2843789 ↗
49. Analysis and Enhanced Control of Hybrid-MMC-Based HVDC Systems During Asymmetrical DC Voltage Faults10.1109/TPWRD.2016.2568240 ↗
50. Control of DC-Fault-Resilient Voltage Source Converter-Based HVDC Transmission System Under DC Fault Operating Condition
51. Design, Control, and Analysis of a Fault-Tolerant Soft-Switching DC–DC Converter for High-Power High-Voltage Applications10.1109/TPEL.2017.2684832 ↗
52. Improved Fault-Tolerant Method for Modular Multilevel Converters by Combined DC and Neutral-Shift Strategy10.1109/TIE.2018.2823659 ↗
53. Zhang, J., Jovcic, D., and Lin, W. (2014, January 26–28). Steady-state DC fault analysis of multiport DC hub. Proceedings of the 2014 16th European Conference on Power Electronics and Applications, Lappeenranta, Finland.
54. Neutral-Point-Shift-Based Active Thermal Control for a Modular Multilevel Converter Under a Single-Phase-to-Ground Fault10.1109/TIE.2018.2833019 ↗
55. Analysis of the fault current limiting requirement and design of the bridge-type FCL in the multi-terminal DC grid10.1049/iet-pel.2017.0493 ↗
56. A Hybrid Current-Limiting Circuit for DC Line Fault in Multiterminal VSC-HVDC System10.1109/TIE.2017.2677311 ↗
57. Cooperative Operation of Superconducting Fault-Current-Limiting Cable and SMES System for Grounding Fault Protection in a LVDC Network10.1109/TIA.2015.2438252 ↗
58. Design and Application of Superconducting Fault Current Limiter in a Multiterminal HVDC System
59. Sliding mode control design principles and applications to electric drives10.1109/41.184818 ↗
60. Sliding mode control of DC/DC converters10.1016/j.jfranklin.2013.02.026 ↗
61. Khalil, H.K. (1996). Nonlinear Systems, Prentice Hall.
62. Slotine, J.E., and Li, W. (1991). Applied Nonlinear Control, Prentice Hall.
63. Jankowski, K.P. (2004). Inverse Dynamic Control in Robotic Applications, Trafford Publishing.
64. Augmented State Approach in Quasi-Sliding-Mode Controlled PEBB Based Power Converters