journal article·2023-04-30Open access

Analysis and Predictive Evaluation of Mechanical Properties of Steel Anchor Box for High-Speed-Railway Cable-Stayed Bridge

Haibo Wang, Hengxuan Wu, Lige Hu, Chen Zhang

Applied Sciences· Volume 13· Issue 9

Abstract

As the stress amplitude in the anchorage zone of cable-stayed bridges vary considerably, it is essential to study the fatigue-load-bearing capacity of the anchorage structures of cable-stayed-bridge girders. In this study, the mechanical properties and force-transmission mechanism of a built-in double-fixed steel anchor box, as well as the influence of the geometric design parameters of the main pressure plates and support plates on its stress performance, were studied. A PSO-BP built-in double-fixed steel anchor box mechanical-performance-prediction-and-evaluation system was established, with the geometric design parameters of the important plates of the main body of the anchor box as the input variables and the mechanical properties of the main stress-transmitting welds of the steel anchor box as the output-evaluation variables. The results were as follows: the cable force was mainly transmitted in the form of shear force through the welds between the support plate and the web of the main beam; the transmission ratio of the four main welds was generally maintained at about 23%, and the stress distribution of each plate was relatively uniform, with most of the stresses in the range of 10~50 MPa. The shear-stress-inhomogeneity coefficient of the transmission weld was sensitive to the changes in the thickness of the support plate and the pressure plate, and the transmission ratio of the main weld was sensitive to the changes in the thickness and length of the support plate. The PSO-BP-based mechanical-performance-prediction-and-evaluation system can be used to explore the intrinsic relationship between the designed cable force, important plate-geometry parameters, and the force performance of steel anchor boxes during the iterative process, and to generate more accurate prediction and evaluation values.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Engineering and Vibration Analysis · Railway Engineering and Dynamics · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Central South University, Changsha 410075, China

References (20)

Show source-provided references
1. Wang, L., Xiao, Z., Li, M., and Fu, N. (2023). Cable Force Optimization of Cable-Stayed Bridge Based on Multiobjective Particle Swarm Optimization Algorithm with Mutation Operation and the Influence Matrix. Appl. Sci., 13.10.3390/app13042611 ↗
2. Full-scale segment model test and performance improvement scheme of cable-pylon anchorage zone for cable-stayed bridge
3. Full-scale fatigue tests of a cable-to-orthotropic bridge deck connection10.1016/j.jcsr.2011.08.017 ↗
4. Fatigue Performance of Butt-Welded Tensile Plate Cable-Girder Anchorages of Long-Span Cable-Stayed Steel Box Girder Railway Bridges10.1061/(ASCE)BE.1943-5592.0001645 ↗
5. Mechanical behavior and fatigue reliability of tensile anchor plate structure in the cable-beam an-chorage zones of cable-stayed bridges
6. Model fatigue test of cable-girder anchorage system of the 2nd nanjing yangtze-river bridge
7. Models of cable-girder anchorage for long-span cable-stayed bridges with steel box girder10.3901/JME.2004.09.084 ↗
8. Two-stage ANN based intelligent technique for optimal positioning and sizing of DERs in distribution system10.1016/j.engappai.2023.105932 ↗
9. Prediction of gamma ray spectrum for 22Na source by feed forward back propagation ANN model10.1016/j.radphyschem.2022.110558 ↗
10. Shallow and deep learning of an artificial neural network model describing a hot flow stress Evolution: A comparative study10.1016/j.matdes.2022.110880 ↗
11. Churyumov, A., Kazakova, A., and Churyumova, T. (2022). Modelling of the Steel High-Temperature Deformation Behaviour Using Artificial Neural Network. Metals, 12.10.3390/met12030447 ↗
12. Application of Machine Learning to predict the mechanical properties of high strength steel at elevated temperatures based on the chemical composition10.1016/j.istruc.2023.03.085 ↗
13. A machine learning approach to predict the wear behaviour of steels10.1016/j.triboint.2023.108500 ↗
14. Finite element analysis of shear performance of UHPFRC-encased steel composite beams: Parametric study10.1016/j.engstruct.2022.114940 ↗
15. Evaluate the effect of steel, polypropylene and recycled plastic fibers on concrete properties
16. Optimization of BP neural network model by chaotic krill herd algorithm10.1016/j.aej.2022.02.033 ↗
17. Process optimization and weld forming control based on GA-BP algorithm for riveting-welding hybrid bonding between magnesium and CFRP10.1016/j.jmapro.2021.08.024 ↗
18. BP-ANN based bond strength prediction for FRP reinforced concrete at high temperature10.1016/j.engstruct.2022.114026 ↗
19. PSO algorithm parameter settings and optimal multi-rotor layout design10.1504/IJSA.2022.122324 ↗
20. An intelligent measurement method of the resonant frequency of ultrasonic scalpel transducers based on PSO-BP neural network10.1016/j.measurement.2021.110680 ↗