Capillary-Driven Microdevice Mixer Using Additive Manufacturing (SLA Technology)
Source abstract
Abstract
This study presents a novel microfluidic mixer designed, fabricated, and characterized using additive manufacturing technology—stereolithography (SLA)—and harnessing capillarity principles achieved through microstructure patterning. Micromixers are integral components in optimizing mixing and reaction processes within microfluidic systems. The proposed microdevice employs a tank mixing method capable of blending two fluids. With a channel length of up to 6 mm, the process time is remarkably swift at 3 s, and the compact device measures 35 × 40 × 5 mm. The capillarity-driven working flow rates range from 1 μL/s to 37 μL/s, facilitated by channel dimensions varying between 400 μm and 850 μm. The total liquid volume within the device channels is 1652 mL (6176 μL including the supply tanks). The mix index, representing the homogeneity of the two fluids, is approximately 0.55 along the main channel. The manufacturing process, encompassing printing, isopropyl cleaning, and UV (ultraviolet) curing, is completed within 90 min. This microfluidic mixer showcases efficient mixing capabilities, rapid processing, and a compact design, marking it as a promising advancement in microfluidic technology. The new microfluidic mixer is a major step forward in microfluidic technology, providing a cost-effective and flexible solution for various uses. Its compatibility with SLA additive manufacturing allows for quick prototyping and design improvements, making it valuable for research and practical applications in chemistry, biology, and diagnostics. This study highlights the importance of combining advanced manufacturing techniques with basic fluid dynamics to create effective and easy-to-use microfluidic solutions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Microsystems & Nanotechnology, Mechanical Engineering Department, Polytechnic University of Catalonia (UPC), Colom Street 11, 08222 Barcelona, Spain
Mechanical Engineering Department, Universidad Politécnica Salesiana, Quito 170517, Ecuador
Funding
Universidad Politécnica Salesiana · Ministerio de Ciencia e Innovación · Agencia Estatal de Investigación · AGUAR
References (43)
Show source-provided references
1. Microfluidic Mixing: A Review10.3390/ijms12053263 ↗
2. Passive mixers in microfluidic systems: A review10.1016/j.cej.2015.10.122 ↗
3. Optimization of micromixer with different baffle shapes using CFD, DOE, meta-heuristic algorithms and multi-criteria decision making10.1016/j.cep.2021.108713 ↗
4. Mehrdel, P., Karimi, S., Farré-Lladós, J., and Casals-Terré, J. (2018). Novel Variable Radius Spiral–Shaped Micromixer: From Numerical Analysis to Experimental Validation. Micromachines, 9.10.3390/mi9110552 ↗
5. Cai, G., Xue, L., Zhang, H., and Lin, J. (2017). A Review on Micromixers. Micromachines, 8.10.3390/mi8090274 ↗
6. Mixing and the Selectivity of Chemical Reactions10.1021/op020074q ↗
7. O’Neill, P.F., Azouz, A.B., Vázquez, M., Liu, J., Marczak, S., Slouka, Z., Chang, H.C., Diamond, D., and Brabazon, D. (2014). Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications. Biomicrofluidics, 8.10.1063/1.4898632 ↗
8. The lab finally comes to the chip!10.1039/C4LC90072C ↗
9. Advances in Microfluidic Materials, Functions, Integration, and Applications10.1021/cr300337x ↗
10. Rogers, C.I., Qaderi, K., Woolley, A.T., and Nordin, G.P. (2015). 3D printed microfluidic devices with integrated valves. Biomicrofluidics, 9.10.1063/1.4905840 ↗
11. Hydrophilic modification of SLA 3D printed droplet generators by photochemical grafting10.1039/D1RA03057D ↗
12. Zhang, J.M., Ji, Q., and Duan, H. (2019). Three-Dimensional Printed Devices in Droplet Microfluidics. Micromachines, 10.10.3390/mi10110754 ↗
13. A multi-vortex micromixer based on the synergy of acoustics and inertia for nanoparticle synthesis10.1016/j.aca.2022.340742 ↗
14. A high-performance micromixer using three-dimensional Tesla structures for bio-applications10.1016/j.cej.2014.11.034 ↗
15. Numerical and experimental analysis of effective passive mixing via a 3D serpentine channel10.1016/j.ces.2022.117972 ↗
16. One-step enzyme kinetics measurement in 3D printed microfluidics devices based on a high-performance single vibrating sharp-tip mixer10.1016/j.aca.2021.338677 ↗
17. Efficient mixing enhancement by orthogonal injection of shear-thinning fluids in a micro serpentine channel at low Reynolds numbers10.1016/j.ces.2020.116368 ↗
18. Microfluidics for nanomedicines manufacturing: An affordable and low-cost 3D printing approach10.1016/j.ijpharm.2021.120464 ↗
19. Pranzo, D., Larizza, P., Filippini, D., and Percoco, G. (2018). Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review. Micromachines, 9.10.3390/mi9080374 ↗
20. 3D printed microfluidic mixer for real-time monitoring of organic reactions by direct infusion mass spectrometry10.1016/j.aca.2021.339252 ↗
21. PolyJet 3D-Printed Enclosed Microfluidic Channels without Photocurable Supports10.1021/acs.analchem.9b01302 ↗
22. Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms10.1021/acs.analchem.7b00136 ↗
23. Cost-Effective Three-Dimensional Printing of Visibly Transparent Microchips within Minutes10.1021/ac4041857 ↗
24. Gong, H., Woolley, A.T., and Nordin, G.P. (2019). 3D printed selectable dilution mixer pumps. Biomicrofluidics, 13.10.1063/1.5070068 ↗
25. 3D Printed Microfluidic Mixers—A Comparative Study on Mixing Unit Performances10.1002/smll.201804326 ↗
26. Online Detection of Peroxidase Using 3D Printing, Active Magnetic Mixing, and Spectra Analysis10.1155/2017/5031809 ↗
27. A fast microfluidic mixer based on acoustically driven sidewall-trapped microbubbles10.1007/s10404-009-0444-3 ↗
28. 3D-printed peristaltic microfluidic systems fabricated from thermoplastic elastomer10.1007/s10404-017-1939-y ↗
29. High-throughput micromixers based on acoustic streaming induced by surface acoustic wave10.1007/s10404-010-0694-0 ↗
30. An acoustofluidic micromixer based on oscillating sidewall sharp-edges10.1039/c3lc50568e ↗
31. Marek’s disease vaccine activates chicken macrophages10.4142/jvs.2018.19.3.375 ↗
32. High density 3D printed microfluidic valves, pumps, and multiplexers10.1039/C6LC00565A ↗
33. Karimi, S., Farré-Lladós, J., Mir, E., Escolar, G., and Casals-Terré, J. (2019). Hemostasis-On-a-Chip: Impedance Spectroscopy Meets Microfluidics for Hemostasis Evaluation. Micromachines, 10.10.3390/mi10080534 ↗
34. Fabrication of 3D printed modular microfluidic system for generating and manipulating complex emulsion droplets10.1007/s10404-019-2258-2 ↗
35. Monolithic, 3D-printed lab-on-disc platform for multiplexed molecular detection of SARS-CoV-210.1016/j.snb.2021.130998 ↗
36. 3D-Printed Microfluidics for Hands-On Undergraduate Laboratory Experiments10.1021/acs.jchemed.9b00620 ↗
37. Low-cost and simple FDM-based 3D-printed microfluidic device for the synthesis of metallic core–shell nanoparticles10.1007/s42452-020-2768-2 ↗
38. Sealing 3D-printed parts to poly(dimethylsiloxane) for simple fabrication of Microfluidic devices10.1016/j.aca.2020.05.014 ↗
39. PolyJet-Based 3D Printing against Micromolds to Produce Channel Structures for Microchip Electrophoresis10.1021/acsomega.2c01265 ↗
40. Microreactor Production by PolyJet Matrix 3D-Printing Technology10.17113/ftb.57.02.19.5725 ↗
41. 3D-printed microfluidic devices: Fabrication, advantages and limitations—A mini review10.1039/C6AY01671E ↗
42. Patmonoaji, A., Mahardika, M.A., Nasir, M., She, Y., Wang, W., Muflikhun, M.A., and Suekane, T. (2022). Stereolithography 3D Printer for Micromodel Fabrications with Comprehensive Accuracy Evaluation by Using Microtomography. Geosciences, 12.10.3390/geosciences12050183 ↗
43. Autonomous microfluidic capillaric circuits replicated from 3D-printed molds10.1039/C6LC00764C ↗