Optimization of the Traffic Load Model for Suspenders of a Super-Long-Span Suspension Bridge Considering Influence Line Geometry and Extreme Load Effect Scenarios
Source abstract
Abstract
The reasonable expression of live load and its accuracy are important to the safety and design rationality of highway bridge structures. In this study, the optimization issue of the traffic load model for the suspenders of large-scale suspension bridges is studied. Taking a 2300-m main span suspension bridge as an example, a method for suspender classification based on the geometric feature of the influence lines is proposed, and the extreme traffic load effect scenarios are analyzed and used as an optimization reference. Multi-objective optimization based on a genetic algorithm is used to explore the improvement of the traffic load model of the suspender. The traffic load model of the suspender is optimized with three objectives, i.e., accuracy, convenience, and improvement, and the optimization results regarding the load value and loading length are obtained. The value of the uniformly distributed load of the optimized model ranges from 6.4 kN/m to 8.9 kN/m, and the maximum value of the concentrated force could reach 1433 kN. By comparing the obtained optimized model with the current specification model and the extreme load effect scenario model, the improved applicability of the optimized model in the analysis of the load effect of the suspender can be verified. The optimized method and relevant conclusions can provide useful references for the improved design and operation management of similar bridge structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Elevator Systems and Control · Mechanical stress and fatigue analysis · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Bridge Engineering, Tongji University, Shanghai 200092, China
Jiangsu Provincial Communications Engineering Construction Bureau, Nanjing 210004, China
Funding
Academician Project Foundation of CCCC
References (34)
Show source-provided references
1. Assessment of Traffic Load Effects of Long Span Bridge Based on Toll-by-Weight Data
2. Reliability Analysis of Long-Span Bridges Based on Combination of Response Surface Method and JC Method
3. Bridge Load and Resistance Models10.1016/S0141-0296(97)00193-4 ↗
4. Research on Probabilistic Model of Highway Bridge Vehicle Loads (2)—Toll-by-Weight Area and Overload Controlling Area
5. A Site-Specific Traffic Load Model for Long-Span Multi-Pylon Cable-Stayed Bridges10.1080/15732479.2016.1164724 ↗
6. An Efficient Approach for Traffic Load Modelling of Long Span Bridges10.1080/15732479.2018.1555264 ↗
7. Vehicle Load Effect Model for Existing Bridge Based on Equilibrium Renewal Process
8. Stochastic Model for Multilane Traffic Effects on Bridges10.1061/(ASCE)1084-0702(2001)6:2(136) ↗
9. Investigation of a Bridge Pier Scour Prediction Model for Safe Design and Inspection10.1061/(ASCE)BE.1943-5592.0000677 ↗
10. Bridge Maintenance Planning Framework Using Machine Learning, Multi-Attribute Utility Theory and Evolutionary Optimization Models10.1016/j.autcon.2022.104460 ↗
11. Optimal Bridge Retrofitting Selection for Seismic Risk Management Using Genetic Algorithms and Neural Network–Based Surrogate Models10.1061/JITSE4.ISENG-2257 ↗
12. A Review of Classical Methods and Nature-Inspired Algorithms (NIAs) for Optimization Problems10.1016/j.rico.2023.100315 ↗
13. Evolutionary Algorithms for Multi-Criterion Optimization in Engineering Design
14. Comparisons of Genetic Algorithm and Particle Swarm Optimization
15. Calibration of the Numerical Model of a Stone Masonry Railway Bridge Based on Experimentally Identified Modal Parameters10.1016/j.engstruct.2016.05.044 ↗
16. Static and Dynamic Finite Element Mode Updating for a Concrete Cable-Stayed Bridge Based on Multi-Objective Optimization
17. A Novel Unsupervised Approach Based on a Genetic Algorithm for Structural Damage Detection in Bridges10.1016/j.engappai.2016.03.002 ↗
18. Model-Based Damage Identification of Railway Bridges Using Genetic Algorithms10.1016/j.engfailanal.2020.104845 ↗
19. Multi-Objective Optimization of a Composite Orthotropic Bridge with RSM and NSGA-II Algorithm10.1016/j.jcsr.2021.106938 ↗
20. An Artificial Neural Network Based Genetic Algorithm for Estimating the Reliability of Long Span Suspension Bridges10.1016/j.finel.2010.03.005 ↗
21. Maintenance Cost Optimization for Bridge Structures Using System Reliability Analysis and Genetic Algorithms10.1061/(ASCE)CO.1943-7862.0001435 ↗
22. Multi-Criteria Reliability Optimization for a Complex System with a Bridge Structure in a Fuzzy Environment: A Fuzzy Multi-Criteria Genetic Algorithm Approach10.17531/ein.2016.3.18 ↗
23. System Reliability Analysis Using Dominant Failure Modes Identified by Selective Searching Technique10.1016/j.ress.2013.02.007 ↗
24. Optimal Placement of Sensors in Monitoring for Bridge Based on Hybrid Genetic Algorithm
25. Optimization of Cable Force for Cable-Stayed Bridges with Mixed Stiffening Girders Based on Genetic Algorithm
26. Tendon Layout Optimization in Statically Indeterminate Structures Using Neural Networks and Genetic Algorithm10.1016/j.engstruct.2024.117713 ↗
27. Safety Assessment of the Antisliding between the Main Cable and Middle Saddle of a Three-Pylon Suspension Bridge Considering Traffic Load Modeling10.1061/(ASCE)BE.1943-5592.0000927 ↗
28. Geometric Nonlinear Analysis of Live Load Responses of Bridges Based on ANSYS
29. Review of HL-93 Bridge Traffic Load Model Using an Extensive WIM Database10.1061/(ASCE)BE.1943-5592.0000729 ↗
30. Estimating Bridge Criticality Due to Extreme Traffic Loads in Highway Networks10.1016/j.engstruct.2023.117172 ↗
31. Probabilistic Model of Traffic Scenarios for Extreme Load Effects in Long-Span Bridges10.1016/j.strusafe.2023.102382 ↗
32. Modelling the Spatial Distribution of Heavy Vehicle Loads on Long-Span Bridges Based on Undirected Graphical Model10.1080/15732479.2019.1639774 ↗
33. Ministry of Transport of the People’s Republic of China (MOT) (2015). General Specifications for Design of Highway Bridges and Culverts, China Communications Press.
34. The Development of Live Load for Long Span Bridges10.3233/BRS-2010-006 ↗