journal article·2024-06-20Open access

Modern Design of Carrier for Overhead Conveyor

Lukáš Hruzík, Jiří Struž, Miroslav Trochta, Lukáš Klapetek, Daniel Pišťáček

Applied Sciences· Volume 14· Issue 12

Abstract

Modern industry should apply modern design in the construction of production facilities. This is typically the case with belt production, where parts are moved towards the worker, or when moving parts from the factory to the warehouse and shipping area. There is a relatively high energy consumption associated with moving these parts. The size of the consumption is mainly determined not only by the size of the transported components and the transport technology, but also by the design of the hoppers used for transport. One way to reduce material handling costs is to make the equipment used for moving parts more efficient. A more efficient carrier should, above all, be lighter. Topological optimization can serve very well for this weight reduction. Of course, the reduction in weight not only has an effect on lower power consumption, but also on the wear of other components. Hence, later in this article, we try to quantify these impacts and assess how much benefit the use of a modern designed carrier can bring. It is also important to consider the cost of producing new carriers versus modifying existing ones. The paper describes the application of the modern designed carrier and compares it with the existing carriers as well as modified existing carriers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Belt Conveyor Systems Engineering · Vibration and Dynamic Analysis · Mechanical Engineering Research and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Machine Parts and Mechanisms, VSB-TU Ostrava , 17. Listopadu 2172/15, 708 00 Ostrava, Czech Republic

Funding

Fakulta strojní, Vysoká Škola Bánská—Technická Univerzita Ostrava

References (39)

Show source-provided references
1. Simulation Model of an Ultra-Light Overhead Conveyor System; Analysis of the Process in the Warehouse
2. Truong, T.D., Khuu, N.H.L., Le, Q.D., Vu, T.T.C., Tran, H.B., and Vo, T.Q. (2023). A General Overview of Overhead Multi-Station Multi-Shuttle Systems and the Innovative Applications Trend in Vietnam. Appl. Sci., 13.10.3390/app131911036 ↗
3. Khuu, N.H.L., Pham, V.A., Vu, T.T.C., Dao, V.T.B., Truong, T.D., Nguyen, N.P., and Vo, T.Q. (2022). A Study on Design and Control of the Multi-Station Multi-Container Transportation System. Appl. Sci., 12.10.3390/app12052686 ↗
4. Theory and Methodology Analytical Solution of Closed-Loop Conveyor Systems with Discrete and Deterministic Material Flow10.1016/0377-2217(88)90028-8 ↗
5. Study of Advance Manufacturing Through Power and Free Conveyor System
6. Aylak, B.L., Alias, C., Hendrikse, H.C., and Noche, B. (2015, January 9–12). Necessary Calculations of Ultra-Light Overhead Conveyor Systems for In-House Transportation. Proceedings of the 11th International Conference on Power Electronics and Drive Systems (PEDS), Sydney, NSW, Australia.10.1109/PEDS.2015.7203476 ↗
7. Myhre, T.A., Transeth, A.A., and Egeland, O. (2015, January 11–12). Loading of Hanging Trolleys on Overhead Conveyor with Industrial Robots. Proceedings of the IEEE International Conference on Technologies for Practical Robot Applications (TePRA), Woburn, MA, USA.10.1109/TePRA.2015.7219677 ↗
8. Bearing Life Enhancement of Motor in Overhead Conveyor using Vibration Analysis
9. Vinícius, M., Fernandes, T., Rocha Pinheiro, O., Santos, A., and Filho, N. (2020). A real time monitoring system for electrical overhead monorail conveyor sistema de monitoramento em tempo real para transportador elétrico de trolho aéreo. VI International Symposium on Innovation and Technology (SIINTEC), Blucher.10.5151/siintec2020-AREALTIME ↗
10. Bendsoe, M.P., and Sigmund, O. (2003). Topology Optimization: Theory, Methods and Applications, Springer. [2nd ed.].
11. Stress-Based Topology Optimization10.1007/BF01196941 ↗
12. Stress-constrained topology optimization with design-dependent loading10.1007/s00158-012-0780-x ↗
13. Efficient topology optimization in MATLAB using 88 lines of code10.1007/s00158-010-0594-7 ↗
14. Connections between topological sensitivity analysis and material interpolation schemes in topology optimization10.1007/s00158-010-0607-6 ↗
15. Compliance–stress constrained mass minimization for topology optimization on anisotropic meshes10.1007/s42452-020-2947-1 ↗
16. Design of Materials with Extreme Thermal Expansion Using a Three-Phase Topology Optimization Method10.1016/S0022-5096(96)00114-7 ↗
17. A mass constraint formulation for structural topology optimization with multiphase materials10.1002/nme.3197 ↗
18. A topology optimization method based on the level set method incorporating a fictitious interface energy10.1016/j.cma.2010.05.013 ↗
19. Topology optimization for additive manufacturing: Accounting for overhang limitations using a virtual skeleton
20. Topology optimization for structural mass reduction of direct drive electric machines
21. Malakova, S., and Sivak, S. (2023). Design optimization of gear wheel bodies in order to reduce weight. MM Sci. J.10.17973/MMSJ.2023_06_2023010 ↗
22. Jeong, G.E. (2021). Topology optimization of deformable bodies with linear dynamic impact and frictionless contact condition. Appl. Sci., 11.10.3390/app112210518 ↗
23. Topology optimization for minimum mass design considering local failure constraints and contact boundary conditions10.1007/s00158-006-0019-9 ↗
24. Structural topology optimization of multibody systems10.1007/s11044-016-9542-7 ↗
25. Guo, J., and Tang, H. (2021). Stiffness-oriented structure topology optimization for hinge-free compliant mechanisms design. Appl. Sci., 11.10.3390/app112210831 ↗
26. EasyChair Preprint Dynamic Analysis of an Lower Control Arm Using Harmonic Excitation for Investigation Dynamic Behaviour
27. Munk, D.J., Vio, G.A., and Steven, G.P. (2015, January 7–12). Aerothermoelastic Structural Topology Optimisation for a Hypersonic Transport Aircraft Wing. Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimization, Sydney, Australia.
28. Multi-objective free-form optimization for shape and thickness of shell structures with composite materials10.1016/j.compstruct.2015.09.011 ↗
29. Czarnecki, S., Czubacki, R., Lewí, T., and Wawruch, P. (2015, January 7–12). Topology Optimization of Continuum Structures Made of Non-Homogeneous Materials of Isotropic or Cubic Symmetry. Proceedings of the 11th World Congress on Structural and Multidisciplinary Optimization, Sydney, Australia.
30. Ghasemi, A., and Elham, A. (2020). A novel topology optimization approach for flow power loss minimization across fin arrays. Energies, 13.10.3390/en13081987 ↗
31. An aerospace bracket designed by thermo-elastic topology optimization and manufactured by additive manufacturing10.1016/j.cja.2019.09.006 ↗
32. Xiaolin, C., and Yijun, L. (2015). Finite Element Modeling and Simulation with ANSYS Workbench, Taylor & Francis Group, LLC. [20140707 ed.].
33. Topology Optimization of Continuum Structures Using Optimality Criterion Approach in Ansys
34. Topology Optimization of Sheet Metal Brackets Using ANSYS
35. Developing Topology Optimization with Additive Manufacturing Constraints in ANSYS®10.1016/j.ifacol.2018.08.340 ↗
36. An ANSYS APDL code for topology optimization of structures with multi-constraints using the BESO method with dynamic evolution rate (DER-BESO)10.1007/s00158-020-02588-2 ↗
37. Jendrysik, S., Bartoszek, S., Bałaga, D., Kost, G., and Sȩkala, A. (2021). Study of energy consumption of a bucket conveyor in a jig concentrator plant in a hard coal mine. Energies, 14.10.3390/en14185706 ↗
38. Sperling, M., Kurschilgen, T., and Schumacher, P. (2024). Concept of a Peripheral-Free Electrified Monorail System (PEMS) for Flexible Material Handling in Intralogistics. Inventions, 9.10.3390/inventions9030052 ↗
39. Generation of bicycle frame image designs using DCGAN network10.1016/j.trpro.2023.11.198 ↗