journal article·2024-07-28Open access

Technical Feasibility of a Two-Cylinder Entablature Steam Engine with a Parallel Motion Crosshead: An Analysis from Mechanical Engineering

José Ignacio Rojas-Sola, Juan Carlos Barranco-Molina

Applied Sciences· Volume 14· Issue 15

Abstract

In this research, we present the results of analyzing the technical feasibility of an old invention by Henry Muncaster from the perspective of mechanical engineering, specifically focusing on the resistance of materials. The invention is a two-cylinder steam engine with a parallel motion crosshead, for which plans were published in the Model Engineer magazine in 1957. This complex device, composed of 76 elements and lacking descriptive information, has been the subject of a recent article that illustrated its design through the engineering drawing discipline and a 3D CAD model. To provide reliable information and conduct a comprehensive study of its technical feasibility, an extensive linear static analysis was performed. This analysis considered two critical positions of the piston inside the cylinder: upper dead center and lower dead center. We determined the optimal range of working pressures necessary to achieve a safety factor within the optimal design range of two to four. The results include von Mises stresses, displacements, and safety factor distributions, confirming that the optimal working pressure range for steam intake is between 1.885 and 3.550 MPa. This ensures that the safety factor values remain between 2.01 and 3.78.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanics and Biomechanics Studies · Modeling, Simulation, and Optimization · Scientific Measurement and Uncertainty Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering Graphics, Design and Projects, University of Jaen, 23071 Jaen, Spain

Higher Polytechnic School, University of Jaen, 23071 Jaen, Spain

Funding

Ministry of Education and Vocational Training of the Government of Spain

References (38)

Show source-provided references
1. Bonet Correa, A. (2013). Arquitecturas Singulares: Ingeniería y Arqueología Industrial, Biblioteca Nueva. (In Spanish).
2. Geijo, J.M., Sanchez-Lite, A., Zulueta, P., and Sampaio, A.Z. (2022). Study of an artifact of the Castilla canal: Reconstruction of the missing machinery. Machines, 10.10.3390/machines10040239 ↗
3. Forgotten industrial heritage in virtual reality case study: Old power plant in Piest’any, Slovakia10.1162/PRES_a_00309 ↗
4. Stylianidis, E., and Remondino, F. (2016). 3D Recording, Documentation and Management of Cultural Heritage, Whittles Publishing.
5. Cocconcelli, M., and Ceccarelli, M. (2024). Italian teaching with models from mechanism catalogues in 19th century. Explorations in the History and Heritage of Machines and Mechanisms, Springer Nature.10.1007/978-3-031-54876-5_2 ↗
6. Ceccarelli, M., and Cocconcelli, M. (2022). Plans for a Course on the History of Mechanisms and Machine Science. Trends in Educational Activity in the Field of Mechanism and Machine Theory, Springer Nature.
7. Peculiarities of evolution of machine technology and its industrialization in Italy during 19th century10.4236/ahs.2015.44024 ↗
8. Fang, Y., and Ceccarelli, M. (2013). Findings on Italian historical developments of machine technology in 19th century towards industrial revolution. The 11th IFToMM International Symposium on Science of Mechanisms and Machines, Springer.10.1007/978-3-319-01845-4_49 ↗
9. Burmester and Allievi: A theory and its application for mechanism design at the end of 19th century10.1115/1.2918911 ↗
10. Ceccarelli, M., and Cocconcelli, M. (2022). Italian historical developments of teaching and museum valorization of mechanism models. Machines, 10.10.3390/machines10080628 ↗
11. Inkster, I. (2004). History of Technology, Bloomsbury Publishing.
12. (2024, July 26). Who Was Henry Muncaster?. Available online: https://modelengineeringwebsite.com/Henry_Muncaster.html.
13. Muncaster, H. (1912). Model Stationary Engines—Their Design and Construction, TEE Publishing Ltd.
14. Micro Newcomen steam engine using two-phase working fluid10.1016/j.energy.2010.12.019 ↗
15. Experimental and numerical evaluation of liquid-piston steam engine10.1016/j.energy.2015.03.115 ↗
16. Simulation model of the thermodynamic cycle of a three-cylinder double-acting steam engine
17. Piston steam engine innovation10.1243/PIME_PROC_1996_210_011_02 ↗
18. Jenkins, R. (1971). Links in the History of Engineering and Technology from Tudor Times, The Newcomen Society at the Cambridge University Press.
19. Rojas-Sola, J.I., Galán-Moral, B., and De la Morena-de la Fuente, E. (2018). Agustín de Betancourt’s double-acting steam engine: Geometric modeling and virtual reconstruction. Symmetry, 10.10.3390/sym10080351 ↗
20. Rojas-Sola, J.I., and De la Morena-de la Fuente, E. (2018). Agustín de Betancourt’s double-acting steam engine: Analysis through computer-aided engineering. Appl. Sci., 8.10.3390/app8112309 ↗
21. Russell, B. (2014). James Watt: Making the World Anew, Reaktion Books.
22. Asimov, I. (1973). Enciclopedia Biográfica de Ciencia y Tecnología. La Vida y la Obra de 1197 Grandes Científicos Desde la Antigüedad Hasta Nuestros Días. Nueva Edición Revisada, Ediciones de la Revista de Occidente-Alianza.Diccionarios. (In Spanish).
23. The Muncaster steam-engine models: A simple oscillating engine
24. The Muncaster steam-engine models: Double-acting oscillating engines
25. The Muncaster steam-engine models: Simple slide-valve engines
26. The Muncaster steam-engine models: Horizontal stationary engines
27. The Muncaster steam-engine models: Vertical stationary engines
28. The Muncaster steam-engine models: The simple and compound twin engines
29. The Muncaster steam-engine models: Governors and control gear
30. The Muncaster steam-engine models: Entablature or table engines
31. (2024, July 26). Two-Cylinder Entablature Steam Engine with Parallel Motion Crosshead. Available online: https://modelengineeringwebsite.com/Muncaster_2-cyl_entablature.html.
32. Rojas-Sola, J.I., and Barranco-Molina, J.C. (2024). Engineering drawing applied to the study of the design of a two-cylinder entablature steam engine with parallel motion crosshead. Symmetry, 16.10.3390/sym16050578 ↗
33. Rojas-Sola, J.I., and Gutiérrez-Antúnez, J.F. (2023). Analysis of the design of Henry Muncaster’s two-cylinder compound vertical steam engine whit speed control. Appl. Sci., 13.10.3390/app13169150 ↗
34. Stavroulakis, G.E., Charalambidi, B.G., and Koutsianitis, P. (2022). Review of computational mechanics, optimization, and machine learning tools for digital twins applied to infrastructures. Appl. Sci., 12.10.3390/app122311997 ↗
35. Shih, R.H., and Jumper, L. (2023). Parametric Modeling with Autodesk Inventor 2024, SDC Publications.
36. Reddy, J.N. (2006). An Introduction to the Finite Element Method, McGraw-Hill. [3rd ed.].
37. Hughes, T.J.R. (2012). The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Dover Publications, INC.
38. Rojas-Sola, J.I., and Barranco-Molina, J.C. (2024). Study of the mechanical behavior of a single-cylinder horizontal steam engine with a crosshead trunk guide through the finite-element method. Appl. Sci., 14.10.3390/app14135878 ↗