Study on Mechanical Properties of Fractured Sandy Mudstone Based on Triaxial Compression Experiment
Source abstract
Abstract
The technological requirements for mining are becoming more and more complex as underground coal mining depth increases. The issue that the concentration of mining stress causes an increase in the degree of rock fracture formation in the stope is one of them, and it has a significant impact on the mine’s production safety and efficiency. Using a pseudo-triaxial compression experimental platform, the effects of confining pressure on the strength, deformation, and fracture propagation route of fractured sandy mudstone were investigated in order to explore the mechanical characteristics of fractured rock mass. The findings demonstrate that the stress and strain curves of split sandy mudstone vary from those of intact specimens in that they are stepped and have several stress decreases. High frequency and low energy levels are released by fractured sandy mudstone, while high frequency and low energy levels are released by unbroken rock. The strength of sandy mudstone is less sensitive to confining pressure when prefabricated fissures are present. Specimens with fractures have a roughly 80% reduction in shear strength while confining pressure remains constant. The fracture propagation route of the intact rock is parallel to the section where the highest shear stress is found, whereas the fracture propagation path of the fractured sandy mudstone progressively expands from the constructed fracture tip to the specimen border. The degree of fracture development in fractured sandy mudstone is greater under the same stress mechanism, and the rock breaks more readily.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Landslides and related hazards · Rock Mechanics and Modeling · Geomechanics and Mining Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Energy and Mining, China University of Mining and Technology (Beijing), Beijing 100083, China
References (29)
Show source-provided references
1. Study on distribution and deformation mechanism of surrounding rock crack in bidirectional extremely unequal pressure soft rock roadway
2. Study on grout diffusion law of grouting reinforcement for crack in deep roadway surrounding rock
3. Study on gas extraction horizon of large diameter roof fracture zone towards long borehole
4. Effect of initial roof damage on destructive state and energy evolution of coal-rock assemblages
5. Spatial distribution and conjugation of overburden fractures in roof induced caving engineering
6. Grouting technology and application of sandstone crack in roof of driving roadway
7. Analysis of control effect of regenerated roof crack in stratified mining based on FLAC3D
8. Investigations on Mechanical Properties and Crack Propagation Characteristics of Coal and Sandy Mudstone Using Three Experimental Methods10.1007/s00603-016-1048-3 ↗
9. Influence of super absorbent polymer on mechanical, rheological, durability, and microstructural properties of self-compacting concrete using non-biodegradable granite pulver
10. Effect of super absorbent polymer on microstructural and mechanical properties of concrete blends using granite pulver
11. Philip, R.E., Andrushia, A.D., Nammalvar, A., Gurupatham, B.G.A., and Roy, K. (2023). A Comparative Study on Crack Detection in Concrete Walls Using Transfer Learning Techniques. J. Compos. Sci., 7.10.3390/jcs7040169 ↗
12. Experimental and Numerical Investigation of Characteristics of Highly Heterogeneous Rock Mechanical Responses in Tight Sandy Conglomerate Reservoir Rock Under Tri-axial Compression10.3389/feart.2021.735208 ↗
13. Effect of different loading rates on mechanical properties of precast fissure rock-like materials and acoustic emission analysis
14. Study on mechanical properties and energy evolution mechanism of fractured rock under uniaxial compression
15. Wang, D. (2023). Strength and Deformation Characteristics of Precast Arc Fissure Rock under Different Stress Paths. [Master’s Thesis, Shandong Agricultural University].
16. Experimental study of true triaxial single-plane cavitating rock burst with prefabricated single-fracture granite
17. Study on surface deformation field evolution and fracture propagation mechanism of prefabricated fissure rock specimens
18. Study on phase field simulation method of crack growth in precast fracture rock
19. Uniaxial mechanical properties and failure mechanism of rock samples with cross-fissures
20. Numerical study on mechanical and hydraulic behaviour of blast-induced fractured rock10.1007/s00366-019-00740-1 ↗
21. Assessing Stress Variability in Fractured Rock Masses with Frictional Properties and Power Law Fracture Size Distributions10.1007/s00603-023-03683-8 ↗
22. General Statistics-Based Methodology for the Determination of the Geometrical and Mechanical Representative Elementary Volumes of Fractured Media10.1007/s00603-021-02374-6 ↗
23. Research on meso-scale deformation and failure mechanism of fractured rock mass subject to biaxial compression10.1007/s12517-021-07769-x ↗
24. A domain-decomposition generalized finite difference method for stress analysis in three-dimensional composite materials10.1016/j.aml.2020.106226 ↗
25. A generalized 2D Bézier-based solution for stress analysis of notched epoxy resin plates reinforced with graphene nanoplatelets10.1016/j.tws.2021.108484 ↗
26. Liu, S. (2022). Study on Mechanical Properties and Energy Evolution Law of Cyclically Disturbed Single Fracture Sandstone. [Master’s Thesis, Chongqing University].
27. Study on mechanical properties of rock fracture in deep coal mine based on triaxial compression test
28. Key theories and engineering applications of mining dynamics and rock formation control
29. Peng, S. (2021). Study on Mechanical Properties and Fracture Mechanism of Fractured Coarse/Fine Sandstone. [Master’s Thesis, Chongqing University].