journal article·2024-09-02Open access

Determination of the Advanced Mining Influence Range in Coal Mines Based on the Statistical Analysis of Mining-Induced Seismicity

Kunyou Zhou, Zhen Deng, Jiliang Kan, Linming Dou, Jiazhuo Li, Minke Duan, Peng Kong

Applied Sciences· Volume 14· Issue 17

Abstract

Determining the advanced mining influence range of an underground working face is crucial for preventing dynamic disasters, such as coal bursts and gas outbursts. In this study, the occurrence of advanced seismicity before the working face as well as its correlation with the acoustic emission (AE) activity of coal and rocks under axial loading was analyzed. Based on the results, a novel statistical method to determine the advanced mining influence range based on advanced seismicity data was proposed and then validated with a case study. The results show that advanced seismicity is caused by the combined effects of static and dynamic stresses at the working face. This seismicity can be used to assess the mining influence degree of the working face on the advanced coal and rock mass, and determine the advanced mining influence range. Using the novel statistical method, the normalized curves for the total number and total energy of the advanced mining-induced seismicity can be plotted. Then, the advanced mining influence range can be determined using thresholds. The thresholds can be established based on the AE activities observed in coal and rock samples under axial static loading. In the case study in this research, the thresholds for the total seismic number and total seismic energy are 0.076 and 0.052, respectively. The corresponding advanced mining influence ranges are 275 m and 245 m, respectively. Field monitoring confirms an advanced mining influence range of 255 m, which validates the results obtained using the novel statistical method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geoscience and Mining Technology · Rock Mechanics and Modeling · Geotechnical and Geomechanical Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Safety and High-Efficiency Coal Mining, Ministry of Education, Anhui University of Science and Technology, Huainan 232001, China

School of Mining Engineering, Anhui University of Science and Technology, Huainan 232001, China

School of Mines, China University of Mining and Technology, Xuzhou 221116, China

Funding

National Natural Science Foundation of China · Key Laboratory of Safe and Effective Coal Mining, Ministry of Education · National Key Research and Development Program of China · Scientific Research Foundation of High-level Talents of Anhui University of Science and Technology

References (29)

Show source-provided references
1. Research progress of coal and rock dynamic disasters and scientific and technological problems in China
2. Khanal, M., Qu, Q.D., Zhu, Y.R., Xie, J.L., Zhu, W.B., Hou, T., and Song, S.K. (2022). Characterization of overburden deformation and subsidence behavior in a kilometer deep longwall mine. Minerals, 12.10.3390/min12050543 ↗
3. Rock dynamics in deep mining10.1016/j.ijmst.2023.07.006 ↗
4. How to realize safe-efficient-intelligent mining of rock burst coal seam
5. Dai, L.P., Pan, Y.S., Xiao, Y.H., Wang, A.W., Wang, W., Wei, C.C., and Fan, D.W. (2024). Parameter design method for destressing boreholes to mitigate roadway coal bursts: Theory and verification. Rock Mech. Rock Eng., 1–18.10.1007/s00603-024-04042-x ↗
6. Coal burst and mining-induced stress evolution in a deep isolated main entry area—A case study10.1016/j.engfailanal.2022.106289 ↗
7. Mining-induced stress distribution of the working face in a kilometer-deep coal mine—A case study in Tangshan coal mine10.1088/1742-2140/aabc6c ↗
8. Distribution characteristics of the advance abutment pressure in a deep stope
9. Numerical simulation of spatial distributions of mining-induced stress and fracture fields for three coal mining layouts10.1016/j.jrmge.2018.02.008 ↗
10. Investigation of longwall headgate stress distribution with an emphasis on pillar behavior10.1016/j.ijrmms.2019.06.008 ↗
11. Case study of the mining-induced stress and fracture network evolution in longwall top coal caving
12. Determination of geo-stress in deep strata incorporating borehole diametral deformation measurement and overcoring10.1016/j.measurement.2023.113217 ↗
13. Rockburst mitigation mechanisms of pressure relief borehole and rock bolt support: Insights from granite true triaxial unloading rockburst tests10.1016/j.enggeo.2024.107571 ↗
14. Application of optical fiber sensing technology in similar model test of shallow-buried and thick coal seam mining10.1016/j.measurement.2021.109559 ↗
15. A quasi-distributed fiber-optical monitoring system for movement of roof strata in mines10.1134/S1062739122020168 ↗
16. Evaluation of current coal burst control techniques and development of a coal burst management framework10.1016/j.tust.2018.07.008 ↗
17. Dispersive seismic waves in a coal seam around the roadway in the presence of excavation damaged zone10.1016/j.ijrmms.2021.104937 ↗
18. The use of data mining techniques in rockburst risk assessment10.1016/J.ENG.2017.04.002 ↗
19. Rockburst prediction model using machine learning based on microseismic parameters of Qinling water conveyance tunnel10.1007/s11771-023-5233-8 ↗
20. Using elastic wave velocity anomaly to predict rockburst hazard in coal mines
21. The influence of a local fault zone on high energy tremor occurrence during longwall mining of a coal seam10.1515/acgeo-2016-0040 ↗
22. Yang, Y., Cao, A.Y., Liu, Y.Q., Bai, X.X., Yan, Z.Q., Wang, S.W., and Wang, C.B. (2023). Understanding the mechanism of strong mining tremors near the goaf area of longwall mining: A case study. Appl. Sci., 13.10.3390/app13095364 ↗
23. Banka, P., Lurka, A., and Szula, L. (2023). Ground motion prediction of high-energy mining seismic events: A bootstrap approach. Energies, 16.10.3390/en16104075 ↗
24. Pattern, change and new situation of coal mine rockburst prevention and control in China
25. Passive seismic tomography for rockburst risk identification based on adaptive-grid method10.1016/j.tust.2019.01.001 ↗
26. Characterizing the cracking process of various rock types under Brazilian loading based on coupled acoustic emission and high-speed imaging techniques10.1016/j.ijrmms.2023.105417 ↗
27. Research on abutment stress distribution of roof-cutting coalface: Numerical simulation and field measurement10.1007/s40948-024-00796-4 ↗
28. Mining-induced static and dynamic loading rate effect on rock damage and acoustic emission characteristic under uniaxial compression10.1016/j.ssci.2019.03.003 ↗
29. Liu, B., Sun, X., Ling, C.W., Huang, Z.J., and Zhang, H.W. (2023). Mechanical behaviors and acoustic emission fractal characteristics of bump-prone coal under different loading rates. Fractal Fract., 7.10.3390/fractalfract7010045 ↗