journal article·2024-09-04Open access

Automatizing Automatic Controller Design Process: Designing Robust Automatic Controller under High-Amplitude Disturbances Using Particle Swarm Optimized Neural Network Controller

Celal Onur Gökçe

Applied Sciences· Volume 14· Issue 17

Abstract

In this study, a novel approach of designing automatic control systems with the help of AI tools is proposed. Given plant dynamics, expected references, and expected disturbances, the design of an optimal neural network-based controller is performed automatically. Several common reference types are studied including step, square, sine, sawtooth, and trapezoid functions. Expected reference–disturbance pairs are used to train the system for finding optimal neural network controller parameters. A separate test set is used to test the system for unexpected reference–disturbance pairs to show the generalization performance of the proposed system. Parameters of a real DC motor are used to test the proposed approach. The real DC motor’s parameters are estimated using a particle swarm optimization (PSO) algorithm. Initially, a proportional–integral (PI) controller is designed using a PSO algorithm to find the simple controller’s parameters optimally and automatically. Starting with the neural network equivalent of the optimal PI controller, the optimal neural network controller is designed using a PSO algorithm for training again. Simulations are conducted with estimated parameters for a diverse set of training and test patterns. The results are compared with the optimal PI controller’s performance and reported in the corresponding section. Encouraging results are obtained, suggesting further research in the proposed direction. For low-disturbance scenarios, even simple controllers can have acceptable performance, but the real quality of a proposed controller should be shown under high-amplitude and difficult disturbances, which is the case in this study. The proposed controller shows higher performance, especially under high disturbances, with an 8.6% reduction in error rate on average compared with the optimal PI controller, and under high-amplitude disturbances, the performance difference is of more than 2.5 folds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Machine Learning and ELM · Adaptive Dynamic Programming Control · Advanced Technologies in Various Fields

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Software Engineering, Afyon Kocatepe University, Afyonkarahisar 03200, Türkiye

References (33)

Show source-provided references
1. Ogata, K. (2010). Modern Control Engineering, Prentice Hall. [5th ed.].
2. Bissell, C. (2009). A history of automatic control. Springer Handbook of Automation, Springer.10.1007/978-3-540-78831-7_4 ↗
3. Sensing System Assisted Novel PID Controller for Efficient Speed Control of DC Motors in Electric Vehicles10.1109/LSENS.2023.3234400 ↗
4. A novel approach for controlling DC motor speed using NARXnet based FOPID controller10.1007/s12530-022-09437-1 ↗
5. Design and Application of PLC-based Speed Control for DC Motor Using PID with Identification System and MATLAB Tuner10.31763/ijrcs.v3i2.775 ↗
6. Efficient Speed Control for DC Motors Using Novel Gazelle Simplex Optimizer10.1109/ACCESS.2023.3319596 ↗
7. Yıldırım, Ş., Bingol, M.S., and Savas, S. (2024). Tuning PID controller parameters of the DC motor with PSO algorithm. Int. Rev. Appl. Sci. Eng.10.1556/1848.2023.00698 ↗
8. A Review on Robust Control of Robot Manipulators for Future Manufacturing10.1007/s12541-023-00812-9 ↗
9. Han, D., Mulyana, B., Stankovic, V., and Cheng, S. (2023). A Survey on Deep Reinforcement Learning Algorithms for Robotic Manipulation. Sensors, 23.10.3390/s23073762 ↗
10. Modelling and control of manipulators for inspection and maintenance in challenging environments: A literature review10.1016/j.arcontrol.2024.100949 ↗
11. A practical study of active disturbance rejection control for rotary flexible joint robot manipulator10.1007/s00500-023-08026-x ↗
12. Dual Design PID Controller for Robotic Manipulator Application10.18196/jrc.v4i1.16990 ↗
13. Villa-Tiburcio, J.F., Estrada-Torres, J.A., Hernández-Alvarado, R., Montes-Martínez, J.R., Bringas-Posadas, D., and Franco-Urquiza, E.A. (2024). ANN Enhanced Hybrid Force/Position Controller of Robot Manipulators for Fiber Placement. Robotics, 13.10.3390/robotics13070105 ↗
14. Chang, Y.-H., Yang, C.-Y., and Lin, H.-W. (2024). Robust Adaptive-Sliding-Mode Control for Teleoperation Systems with Time-Varying Delays and Uncertainties. Robotics, 13.10.3390/robotics13060089 ↗
15. Kouvakas, N.D., Koumboulis, F.N., and Sigalas, J. (2024). A Two Stage Nonlinear I/O Decoupling and Partially Wireless Controller for Differential Drive Mobile Robots. Robotics, 13.10.3390/robotics13020026 ↗
16. Bernardo, R., Sousa, J.M.C., Botto, M.A., and Gonçalves, P.J.S. (2023). A Novel Control Architecture Based on Behavior Trees for an Omni-Directional Mobile Robot. Robotics, 12.10.3390/robotics12060170 ↗
17. Miquelanti, M.G., Pugliese, L.F., Silva, W.W.A.G., Braga, R.A.S., and Monte-Mor, J.A. (2024). Comparison between an Adaptive Gain Scheduling Control Strategy and a Fuzzy Multimodel Intelligent Control Applied to the Speed Control of Non-Holonomic Robots. Appl. Sci., 14.10.3390/app14156675 ↗
18. Rodriguez-Castellanos, D., Blas-Valdez, M., Solis-Perales, G., and Perez-Cisneros, M.A. (2024). Neural Robust Control for a Mobile Agent Leader–Follower System. Appl. Sci., 14.10.3390/app14135374 ↗
19. Polakovič, D., Juhás, M., Juhásová, B., and Červeňanská, Z. (2022). Bio-Inspired Model-Based Design and Control of Bipedal Robot. Appl. Sci., 12.10.3390/app121910058 ↗
20. Chi, K.-H., Hsiao, Y.-F., and Chen, C.-C. (2023). Robust Feedback Linearization Control Design for Five-Link Human Biped Robot with Multi-Performances. Appl. Sci., 13.10.3390/app13010076 ↗
21. Godinez-Garrido, G., Santos-Sánchez, O.-J., Romero-Trejo, H., and García-Pérez, O. (2023). Discrete Integral Optimal Controller for Quadrotor Attitude Stabilization: Experimental Results. Appl. Sci., 13.10.3390/app13169293 ↗
22. Particle swarm optimization based optimal PID controller for quadcopters
23. He, Y., Luo, X., and Wang, X. (2024). Research and Simulation Analysis of Fuzzy Intelligent Control System Algorithm for a Servo Precision Press. Appl. Sci., 14.10.3390/app14156592 ↗
24. Alhamrouni, I., Kahar, N.H.A., Salem, M., Swadi, M., Zahroui, Y., Kadhim, D.J., Mohamed, F.A., and Nazari, M.A. (2024). A Comprehensive Review on the Role of Artificial Intelligence in Power System Stability, Control, and Protection: Insights and Future Directions. Appl. Sci., 14.10.3390/app14146214 ↗
25. Hu, Y., Zhou, W., Liu, Y., Zeng, M., Ding, W., Li, S., Li, G., Li, Z., and Knoll, A. (2024). Efficient Online Planning and Robust Optimal Control for Nonholonomic Mobile Robot in Unstructured Environments. IEEE Trans. Emerg. Top. Comput. Intell., 1–17.10.1109/TETCI.2024.3424527 ↗
26. Neural network based fractional order sliding mode tracking control of nonholonomic mobile robots
27. A fuzzy-based Predictive PID for DC motor speed control10.1007/s40435-023-01368-2 ↗
28. Improving speed control characteristics of PMDC motor drives using nonlinear PI control10.1007/s00521-024-09568-3 ↗
29. Salp Swarm Algorithm: A bio-inspired optimizer for engineering design problems10.1016/j.advengsoft.2017.07.002 ↗
30. Dawane, M.K., Malwatkar, G.M., and Deshmukh, S.P. (2023). Performance improvement of DC servo motor using sliding mode controller. J. Auton. Intell., 7.10.32629/jai.v7i3.1162 ↗
31. Şaşmaz, M. (2022). On Model Complexity and Representation Power of Artificial Neural Networks. Engineering from Machine Learning to Virtual Reality, IKSAD.
32. Clerc, M. (2010). Particle Swarm Optimization, John Wiley & Sons.
33. Thomas, G.B., Weir, M.D., and Hass, J. (2010). Thomas’ Calculus: Multivariable, Pearson Education.