journal article·2024-09-06Open access

Morphological and Three-Dimensional Analysis for the Clinical Reproduction of Orthodontic Attachments: A Preliminary Study

Fabiana Nicita, Fabio Salmeri, Michele Runci Anastasi, Emidio Aquilio, Frank Lipari, Antonio Centofanti, Angelo Favaloro

Applied Sciences· Volume 14· Issue 17

Abstract

In invisible orthodontics, the role of composite attachments in facilitating complex tooth movements is crucial. This study, which evaluates the efficacy of a novel clinical attachment procedure, holds significant implications for the field. The technique used two templates (one pre-drilled and the other pre-loaded with high-viscosity composites) and was compared with the standard procedure. Fifty attachments were planned for four dental arch prototypes. Dental impressions were taken using digital scans for virtual planning and after tested techniques. The stereolithographic files (STL) obtained were aligned with those of the virtual planning, and a colorimetric map was used to evaluate the composite resin’s maximum excess and defect deviation. The enamel–resin interfaces were observed by scanning electron microscopy (SEM). The Fisher test for the distribution of detachments and morphological defects and the Mann–Whitney test for the maximum values of excess and defect were used. No significant results were found between groups for morphological defects and detachments, and the maximum values of defect and excess were reported. SEM images for the experimental technique showed integrated adhesion. This innovative procedure, which has proven reliable and operationally straightforward, holds promise, instilling confidence in its practicality and potential to advance the field of orthodontics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthodontics and Dentofacial Orthopedics · dental development and anomalies · Temporomandibular Joint Disorders

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical, Dental Sciences and Morphofunctional Imaging, University of Messina, 98125 Messina, Italy

Department of Engineering, University of Messina, 98166 Messina, Italy

Department of Maxillo-Facial Surgery, Sapienza University, 00161 Rome, Italy

Scientific Director and Clinical Manager of Lineo Aligners, 10036 Torino, Italy

Private Practitioner, Capo d’Orlando, 98071 Messina, Italy

References (42)

Show source-provided references
1. Has Invisalign Improved? A Prospective Follow-up Study on the Efficacy of Tooth Movement with Invisalign10.1016/j.ajodo.2019.12.015 ↗
2. Controlling Orthodontic Tooth Movement with Clear Aligners
3. Chemical-Physical Characterization of PET-G-Based Material for Orthodontic Use: Preliminary Evaluation of Micro-Raman Analysis10.1055/s-0043-1764424 ↗
4. Simon, M., Keilig, L., Schwarze, J., Jung, B.A., and Bourauel, C. (2014). Treatment Outcome and Efficacy of an Aligner Technique—Regarding Incisor Torque, Premolar Derotation and Molar Distalization. BMC Oral Health, 14.10.1186/1472-6831-14-68 ↗
5. Forces and Moments Generated by Removable Thermoplastic Aligners: Incisor Torque, Premolar Derotation, and Molar Distalization10.1016/j.ajodo.2014.03.015 ↗
6. Maxillary Molar Distalization with Aligners in Adult Patients: A Multicenter Retrospective Study10.1186/s40510-016-0126-0 ↗
7. Invisalign Treatment of Lower Incisor Extraction Cases10.21307/aoj-2020-116 ↗
8. Chemical and Mechanical Characteristics of Contemporary Thermoplastic Orthodontic Materials
9. Tamburrino, F., D’Antò, V., Bucci, R., Alessandri-Bonetti, G., Barone, S., and Razionale, A.V. (2020). Mechanical Properties of Thermoplastic Polymers for Aligner Manufacturing: In Vitro Study. Dent. J., 8.10.3390/dj8020047 ↗
10. Effects of Different Aligner Materials and Attachments on Orthodontic Behavior10.1016/j.jds.2021.01.011 ↗
11. Analysis of Pain Level in Cases Treated with Invisalign Aligner: Comparison with Fixed Edgewise Appliance Therapy10.1186/s40510-014-0064-7 ↗
12. Evaluation of Pain Intensity in Patients Treated with Aligners and Conventional Fixed Appliances: Randomized Clinical Trial10.1111/ocr.12431 ↗
13. Qualitative and Quantitative Evaluation of Different Types of Orthodontic Brackets and Archwires by Optical Microscopy and X-Ray Fluorescence Spectroscopy10.3390/prosthesis3040031 ↗
14. Biomechanics of Clear Aligners: Hidden Truths & First Principles
15. Enamel Loss at Bond-up, Debond and Clean-up Following the Use of a Conventional Light-Cured Composite and a Resin-Modified Glass Polyalkenoate Cement10.1093/ejo/cji031 ↗
16. Orthodontic Bonding and Debonding Induces Structural Changes but Does Not Alter the Mechanical Properties of Enamel10.1186/s40510-018-0211-7 ↗
17. Influence of Orthodontic Adhesives and Clean-up Procedures on the Stain Susceptibility of Enamel after Debonding10.2319/062610-350.1 ↗
18. Invisalign® Treatment in the Anterior Region: Were the Predicted Tooth Movements Achieved?10.1007/s00056-012-0097-9 ↗
19. Clear Aligners Generations and Orthodontic Tooth Movement10.1179/1465313315Y.0000000004 ↗
20. Clinical Effectiveness of Invisalign® Orthodontic Treatment: A Systematic Review10.1186/s40510-018-0235-z ↗
21. Effects of Variable Attachment Shapes and Aligner Material on Aligner Retention10.2319/091014-637.1 ↗
22. The Use of Attachments in Aligner Treatment: Analyzing the “Innovation” of Expanding the Use of Acid Etching-Mediated Bonding of Composites to Enamel and Its Consequences10.1016/j.ajodo.2020.04.008 ↗
23. Initial Force Systems during Bodily Tooth Movement with Plastic Aligners and Composite Attachments: A Three-Dimensional Finite Element Analysis10.2319/050714-330.1 ↗
24. Effectiveness of Composite Attachments in Controlling Upper-Molar Movement with Aligners
25. Biomechanical Effects of Different Auxiliary-Aligner Designs for the Extrusion of an Upper Central Incisor: A Finite Element Analysis10.1155/2019/9687127 ↗
26. Influence of Attachment Bonding Protocol on Precision of the Attachment in Aligner Treatments10.1007/s00056-019-00204-7 ↗
27. The Effect of Orthodontic Adhesive and Bracket-Base Design in Adhesive Remnant Index on Enamel
28. Gazzani, F., Bellisario, D., Quadrini, F., Parrinello, F., Pavoni, C., Cozza, P., and Lione, R. (2022). Comparison Between Different Composite Resins Used for Clear Aligner Attachments: An In-Vitro Study. Front. Mater., 8.10.3389/fmats.2021.789143 ↗
29. Translucency, Stain Resistance, and Hardness of Composites Used for Invisalign Attachments
30. Surface Wear of Resin Composites Used for Invisalign® Attachments
31. Scanning Electron Microscopy Analysis of Aligner Fitting on Anchorage Attachments10.1007/s00056-018-00167-1 ↗
32. D’Antò, V., Muraglie, S., Castellano, B., Candida, E., Sfondrini, M.F., Scribante, A., and Grippaudo, C. (2019). Influence of Dental Composite Viscosity in Attachment Reproduction: An Experimental in Vitro Study. Materials, 12.10.3390/ma12234001 ↗
33. A Simple Technique for Placing Invisalign Attachments
34. In Vivo Analysis of Intraoral Scanner Precision Using Open-Source 3D Software10.3390/prosthesis4040045 ↗
35. Vermiglio, G., Centofanti, A., Matarese, G., Militi, A., Matarese, M., Arco, A., Nicita, F., and Cutroneo, G. (2020). Human Dental Pulp Tissue during Orthodontic Tooth Movement: An Immunofluorescence Study. J. Funct. Morphol. Kinesiol., 5.10.3390/jfmk5030065 ↗
36. Comparative Study of Three Composite Materials in Bonding Attachments for Clear Aligners10.1111/ocr.12465 ↗
37. Morpho-Structural Alterations of Sub-Chondral Bone Tissue in Patients with Osteoarthritis: A Scanning Electron Microscopy Study
38. Lo Giudice, G., Cagidiaco, E.F., Lo Giudice, R., Puleio, F., Nicita, F., and Calapaj, M. (2019). Evaluation of Mechanical Properties of a Hollow Endodontic Post by Three Point Test and SEM Analysis: A Pilot Study. Materials, 12.10.3390/ma12121983 ↗
39. Forces and Moments Generated by Aligner-Type Appliances for Orthodontic Tooth Movement: A Systematic Review and Meta-Analysis10.1111/ocr.12333 ↗
40. Barone, S., Paoli, A., Razionale, A.V., and Savignano, R. (2017). Computational Design and Engineering of Polymeric Orthodontic Aligners. Int. J. Numer. Methods Biomed. Eng., 33.10.1002/cnm.2839 ↗
41. Performance of Rigid and Soft Transfer Templates Using Viscous and Fluid Resin-Based Composites in the Attachment Bonding Process of Clear Aligners10.1155/2022/1637594 ↗
42. Salmeri, F., Barberi, E., Lipari, F., and Nicita, F. (2023). A Novel Quality Assessment Method for the Clinical Reproduction of Orthodontic Attachments Based on Differential Entropy. Eng. Proc., 56.10.3390/ASEC2023-15245 ↗