journal article·2020-12-10Open access

Modeling and Speed Tuning of a PMSM with Presence of Fissure Using Dragonfly Algorithm

Omar Aguilar-Mejía, Abraham Manilla-García, Ivan Rivas-Cambero, Hertwin Minor-Popocatl

Applied Sciences· Volume 10· Issue 24

Abstract

This paper presents a robust trajectory tracking control for a Permanent Magnet Synchronous Motor (PMSM) with consideration a fault, parametric uncertainties and external disturbances by effectively integrating robust optimal linear quadratic control. One kind of fault is considered in the machine, particularly the presence of fissure rotor. The dynamic model of the PMSM with the presence of fissure presents highly non-linear behaviors, which means that tuning is quite complicated, which the tuning was chosen through swarm intelligence optimization (Dragonfly Algorithm). A sensitivity analysis is carried out, in order to limit the search range to minimize the evaluation time. This methodology was used to diminish these defects during motor operation. Simulation results show that the optimal linear quadratic control method has a robust fault-tolerant performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Sensorless Control of Electric Motors · Iterative Learning Control Systems · Magnetic Bearings and Levitation Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School Engineering, UPAEP University, Puebla 72410, Puebla, Mexico

Engineering Sciences, Pontificia Universidad Católica Madre y Maestra PUCMM, Santo Domingo 2748, Dominican Republic

Faculty of Engineering, Universidad Politécnica de Tulancingo, Tulancingo de Bravo 43629, Hidalgo, Mexico

References (27)

Show source-provided references
1. Gieras, J.F., and Wing, M. (2002). Permanent Magnet Motor Technology: Desing and Applications, Marcel Dekker. [2nd ed.].
2. Fault detection of broken rotor bar in LS-PMSM using random forests10.1016/j.measurement.2017.11.004 ↗
3. Bachschmid, N., Pennacchi, P., and Tanzi, E. (2010). Cracker Rotors, Springer.10.1007/978-3-642-01485-7 ↗
4. A fault monitoring approach using model-based and neural network techniques applied to input–output feedback linearization control induction motor10.1007/s12652-019-01307-0 ↗
5. Nath, A.G., Udmale, S.S., and Singh, S.K. (2020). Role of artificial intelligence in rotor fault diagnosis: A comprehensive review. Artif. Intell. Rev.10.1007/s10462-020-09910-w ↗
6. A Novel Power Failure Compensation Control Method for Active Magnetic Bearings Used in High-Speed Permanent Magnet Motor10.1109/TPEL.2015.2471807 ↗
7. Diagnostics of mechanical and electrical faults in induction motors using wavelet-based features of vibration and current through support vector machine algorithms for various operating conditions10.1007/s40430-019-1574-5 ↗
8. Predicting the fatigue life of synchronous motor-driven compressor using the complex modal reduction technique10.1016/S0045-7825(99)00433-8 ↗
9. Fault Tolerant Design for Permanent Magnet Synchronous Motor using Fuzzy Speed Controller10.1016/j.ifacol.2016.07.132 ↗
10. Algoritmo robusto para el diagnóstico de fallas eléctricas en motor de inducción trifásico basado en herramientas espectrales y ondeletas10.1016/j.riai.2015.04.003 ↗
11. Optimal tuning of 3 degree-of-freedom proportional-integral-derivative controller for hybrid distributed power system using dragonfly algorithm10.1016/j.compeleceng.2018.09.003 ↗
12. Malik, H., Srivastava, S., Sood, Y., and Ahmad, A. (2019). Optimized 2DOF PID for AGC of Multi-area Power System Using Dragonfly Algorithm. Applications of Artificial Intelligence Techniques in Engineering, Springer.
13. Xue, W., Li, Y., Cang, S., Jia, H., and Wang, Z. (2015). Chaotic behavior and circuit implementation of a fractional-order permanent magnet synchronous motor model. J. Frankl. Inst., 2887–2898.10.1016/j.jfranklin.2015.05.025 ↗
14. Subcycle fatigue crack growht formulation under positive and negative stress ratios10.1016/j.engfracmech.2017.11.029 ↗
15. Modelos de crecimiento de grietas por fatiga
16. Arana, J.L., and González, J.J. (2011). Mecánica de la Fractura, Servicio Editorial de la Universidad del País Vasco.
17. Fatigue Crack path manipulation for crack growth rate measurement10.1016/j.engfracmech.2016.04.020 ↗
18. Genta, G. (2005). Dynamics of Rotating System, Springer.10.1007/0-387-28687-X ↗
19. Rasoolzadeh, A., and Tavazoei, M.S. (2012). Prediction of chaos in non-salient permanentmagnet synchronous machines. Phys. Lett. A, 73–79.10.1016/j.physleta.2012.10.053 ↗
20. Krishnan, R. (2010). Permanent Magnet Synchronous and Brushless DC Motor Drives, CRC Press.
21. Adaptive neural network control of chaos in permanent magnet synchronous motor, Taylor and Francis Group
22. Permanent Magnet Synchronous Motor with Linear Quadratic Speed Controller10.1016/j.egypro.2011.12.943 ↗
23. Adaptive disturbance compensation finite control set optimal control for PMSM systems based on sliding mode extended state observer10.1016/j.ymssp.2017.05.007 ↗
24. Dragonfly algorithm: A comprehensive review and applications10.1007/s00521-020-04866-y ↗
25. Dragonfly algorithm: A new meta-heuristic optimization technique for solving single-objective, discrete, and multi-objective problems10.1007/s00521-015-1920-1 ↗
26. Análisis de sensibilidad de sistemas algebraicos diferenciales
27. Krauze, P., Wasynczuk, O., Sudhoff, S., and Pekarek, S. (2013). Analysis of Electric Machinery and Drive Systems, IEEE Press. [3rd ed.].10.1002/9781118524336 ↗