Analysis of Multilayered Ground Amplification Characteristics by Scaled-Down Model Tests
Source abstract
Abstract
During an earthquake, seismic waves travel through different media through the source to reach the surface. It is very necessary to study the dynamic characteristics of soil between different layers during earthquake. In order to explore the dynamic characteristics of soil under the action of ground seismic input motion, scaled-down model tests were carried out through 1 g shaking table tests based on a laminar shear box. After creating a dense lower ground with a sample of mixed silica and silty soil, and a loose upper ground with sand, the acceleration was measured by applying seismic loading through the 1 g shaking table test. Through the Peak ground acceleration, Spectral acceleration and Spectral acceleration amplification factors, the magnification variation and differences of each depth of the model and the dynamic characteristics of soil between different layers were displayed. In order to verify the reliability of the experimental data, a one-dimensional ground response analysis was carried out using DEEPSOIL software. The approximate results obtained by comparing each other can provide a basis for the accuracy of the experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Chosun University, Gwangju 61452, Korea
Funding
Chosun University
References (20)
Show source-provided references
1. Deformation–failure mechanism of saturated fill slopes due to resonance phenomena based on 1 g shaking-table tests10.1139/cgj-2017-0385 ↗
2. Dynamic behavior of slope models with various slope inclinations10.1016/j.sandf.2014.12.010 ↗
3. Saturation effects on horizontal and vertical motions in a layered soil–bedrock system due to inclined SV waves10.1016/S0267-7261(01)00015-X ↗
4. Shaking table modeling of seismically induced deformations in slopes10.1061/(ASCE)1090-0241(2005)131:5(610) ↗
5. Amplification of seismic accelerations at slope crests10.1139/T09-006 ↗
6. Numerical study on dynamic behavior of slope models including weak layers from deformation to failure using material point method10.1016/j.sandf.2017.03.001 ↗
7. Seismic analysis of nonhomogeneous slopes with cracks using a discretization kinematic approach10.1061/(ASCE)GM.1943-5622.0001487 ↗
8. Numerical and experimental study on scaled soil-structure model for small shaking table tests10.1016/j.soildyn.2019.01.016 ↗
9. Natural frequency characteristics of rock masses containing a complex geological structure and their effects on the dynamic stability of slopes10.1007/s00603-019-01885-7 ↗
10. Shaking table tests on discrepant responses of shaft-tunnel junction in soft soil under transverse excitations10.1016/j.soildyn.2019.02.013 ↗
11. Analysis of behavior of slope models for collapsing from stability by shaking table tests under 1G field10.1051/matecconf/201925805004 ↗
12. Jin, Y., Kim, H., Kim, D., Lee, Y., and Kim, H. (2021). Seismic Response of Flat Ground and Slope Models through 1 g Shaking Table Tests and Numerical Analysis. Appl. Sci., 11.10.3390/app11041875 ↗
13. Kim, H., Kim, D., Lee, Y., and Kim, H. (2020). Effect of soil box boundary conditions on dynamic behavior of model soil in 1 g shaking table test. Appl. Sci., 10.10.3390/app10134642 ↗
14. Representative shear wave velocity of geotechnical layers by synthesizing in-situ seismic test data in Korea10.9720/kseg.2012.3.293 ↗
15. Challenges in predicting seismic site response with 1D analyses: Conclusions from 114 KiK-net vertical seismometer arrays10.1785/0120180062 ↗
16. Hashash, Y.M.A., Musgrove, M.I., Harmon, J.A., Ilhan, O., Xing, G., Numanoglu, O., Groholski, D.R., Phillips, C.A., and Park, D. (2020). DEEPSOIL 7.0, User Manual, Board of Trustees of University of Illinois at Urbana-Champaign.
17. American Society of Civil Engineers (2022). Minimum Design Loads and Associated Criteria for Buildings and Other Structures, American Society of Civil Engineers.
18. Labuz, J.F., and Zang, A. (2012). Mohr–coulomb failure criterion. The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007–2014, Springer.10.1007/978-3-319-07713-0_19 ↗
19. Shear modulus and damping in soils: Design equations and curves10.1061/JSFEAQ.0001760 ↗
20. Darendeli, M.B. (2001). Development of a New Family of Normalized Modulus Reduction and Material Damping Curves, The university of Texas at Austin.