Estimation of Resonance Frequency for Systems with Contact Using Linear Dynamics Methods
Source abstract
Abstract
Limitations in determining the resonance frequency for large models, taking into account non-linearity in the form of contact, initiated work on the creation of a simplified method of estimating these resonance frequencies. The trend in this field is the use of time-domain methods with full contact, or frequency-domain methods which take into account nonlinearity for specific cases. For simplification, classical modal analysis is often used, with boundary conditions taken into account or freeform vibrations, with neglected contact, or with tied contact areas, as though the contact was always closed. The presented approximation method is based on both types of such analysis and compensates for the error of both of the solutions. The method was elaborated with nonlinear dynamics simulations in the time domain. This work presents experimental verification of the method for a simple beam, and for more complex geometry—the satellite antenna panel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Vibration and Dynamic Analysis · Mechanical and Thermal Properties Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Ignacego Łukasiewicza 5, 50-371 Wroclaw, Poland
References (26)
Show source-provided references
1. Herzog, A., Krack, M., Panning-von Scheidt, L., and Wallaschek, J. (2014). Comparison of Two Widely-Used Frequency-Time Domain Contact Models for the Vibration Simulation of Shrouded Turbine Blades, American Society of Mechanical Engineers.10.1115/GT2014-26226 ↗
2. Multi-Harmonic Analysis of Dry Friction Damped Systems Using an Incremental Harmonic Balance Method10.1115/1.3169175 ↗
3. Contact vibrations10.1016/0022-460X(72)90168-X ↗
4. Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces10.1115/1.4000266 ↗
5. A method for numerical and experimental nonlinear modal analysis of nonsmooth systems10.1016/j.ymssp.2018.11.009 ↗
6. Petrov, E.P. (2011). A High-Accuracy Model Reduction for Analysis of Nonlinear Vibrations in Structures with Contact Interfaces. J. Eng. Gas Turbines Power, 133.10.1115/1.4002810 ↗
7. Adaptive Microslip Projection for Reduction of Frictional and Contact Nonlinearities in Shrouded Blisks10.1115/1.4033003 ↗
8. Krack, M., Scheidt, L.P., Wallaschek, J., Siewert, C., and Hartung, A. (2013). Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and Its Application to Bladed Disks with Shroud Contact. J. Eng. Gas Turbines Power, 135.10.1115/1.4025002 ↗
9. Energy conserving algorithms for dynamic contact analysis using Newmark methods10.1016/j.compstruc.2012.07.012 ↗
10. A mortar method for energy-momentum conserving schemes in frictionless dynamic contact problems10.1002/nme.2466 ↗
11. Laxalde, D., Salles, L., Blanc, L., and Thouverez, F. (2008). Non-Linear Modal Analysis for Bladed Disks with Friction Contact Interfaces, ASME Turbo Expo. Structures and Dynamics, Parts A and B.10.1115/GT2008-50860 ↗
12. Nonlinear frequency response analysis of structural vibrations10.1007/s00466-014-1070-9 ↗
13. Non-linear vibrations of a beam with cantilever-Hertzian contact boundary conditions10.1016/S0022-460X(03)00791-0 ↗
14. A Method of Evaluating Local Elasticity and Adhesion Energy from the Nonlinear Response of AFM Cantilever Vibrations10.1299/jsmea.44.396 ↗
15. Tomović, R. (2020). A simplified mathematical model for the analysis of varying compliance vibrations of a rolling bearing. Appl. Sci., 10.10.3390/app10020670 ↗
16. Tchomeni, B.X., and Alugongo, A. (2021). Vibrations of misaligned rotor system with hysteretic friction arising from driveshaft–stator contact under dispersed viscous fluid influences. Appl. Sci., 11.10.3390/app11178089 ↗
17. Finite element nonlinear dynamic analysis of sandwich plates with partially detached facesheet and core10.1016/j.finel.2012.08.003 ↗
18. Hernandez, S., Menga, E., Hernandez, S., Moledo, S., and Lopez, C. (2022, February 01). Nonlinear Dynamic Analysis of Assembled Aircraft Structures with Concentrated Nonlinearities. Available online: https://www.researchgate.net/publication/309351275.
19. On the Partial Difference Equations of Mathematical Physics10.1147/rd.112.0215 ↗
20. Suzuki, K., Kimpara, I., Kageyama, K., and Funami, K. (2004, January 19–22). Free vibration and damping characterization of delaminated composites by FEM. Proceedings of the Collection of Technical Papers—AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, CA, USA.10.2514/6.2004-1620 ↗
21. Free vibration analysis of a composite beam with single delamination: An improved free and constrained model10.5267/j.esm.2014.7.002 ↗
22. Flexural vibrations of beams with delaminations10.1016/0022-460X(88)90253-2 ↗
23. Free vibration of delaminated composite sandwich beams10.2514/3.12745 ↗
24. Effect of debonding on natural frequencies and frequency response functions of honeycomb sandwich beams10.1016/S0263-8223(01)00136-2 ↗
25. Brunetti, J., D’ambrogio, W., and Fregolent, A. (2022). Evaluation of Different Contact Assumptions in the Analysis of Friction-Induced Vibrations Using Dynamic Substructuring. Machines, 10.10.3390/machines10050384 ↗
26. (2015, September 09). European Cooperation for Space Standarization, Space Engineering, Spacecraft Mechanical Loads Analysis Handbook, No. February. Available online: https://ecss.nl/hbstms/ecss-e-hb-32-26a-spacecraft-mechanical-loads-analysis-handbook/.