Design and Optimization of Low Impact Shift Control Strategy for Aviation Transmission Power System Based on Response Surface Methodology
Source abstract
Abstract
The utilization of a variable-speed power system significantly improves the forward flight speed and cruising range of the helicopter. Nevertheless, the shock of speed and torque during the shift process brings stability and safety problems that cannot be ignored. Thus, swift and stable shift control is a key issue in the research on aviation power systems. This study focuses on the design and optimization of low-impact shift control strategies for a variable-speed power system, which involves multiple control variables, long adjustment times, and uncontrollable risks due to the nonsteady state. A comprehensive power system model that integrates the engine, a two-speed dual-clutch transmission system, and the main rotor was proposed. By selecting the engine fuel flow, friction clutch hydraulic pressure, and rotor pitch angle as input signals, regression fitting models between the input signals’ starting time points and speed or torque shock were obtained using Response Surface Methodology (RMS). The interaction effect of multiple time series was analyzed, and four kinds of low-impact nonlinear programming multi-objective optimized models for speed or torque are proposed. The results indicate that the P values of the RMS fitting models at upshift and downshift are less than 0.0001 and 0.05, respectively, which are highly significant and can effectively predict the shift dynamic response; under the optimized upshift and downshift control strategy, the speed and torque shock are reduced by 5–10%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydraulic and Pneumatic Systems · Real-time simulation and control systems · Advanced Combustion Engine Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China
Funding
the National Natural Science Foundation of China
References (31)
Show source-provided references
1. Using control redundancy for power and vibration reduction on a compound helicopter at high speeds10.4050/JAHS.63.032009 ↗
2. Mathematical Model of the Fuselage of a Promising High-Speed Helicopter10.3103/S1068799821020264 ↗
3. Zhao, J., Brigley, M., Modarres, R., and Welsh, W.A. (2019, January 7). S-97 Raider Rotor Vibratory Loads Analysis using CFD-CSD. Proceedings of the AIAA Scitech 2019 Forum, Manchester, UK.10.2514/6.2019-0860 ↗
4. Zhao, J., Lorber, P., and Brigley, M. (2022, January 3–7). S-97 Raider® Empennage Loads and Vibrations: Analysis, Correlation and Understanding. Proceedings of the AIAA SCITECH 2022 Forum, San Diego, CA, USA.10.2514/6.2022-0323 ↗
5. Army-Technology (2023, October 08). V-280 Valor Helicopter. Available online: https://www.army-technology.com/projects/v280-valor-helicopter/.
6. BELL (2023, October 01). V-280 VALOR. Available online: https://www.bellflight.com/products/bell-v-280.
7. Research on near field aeroacoustics suppression of tilt-rotor aircraft based on rotor phase control10.1016/j.apacoust.2021.108451 ↗
8. Krantz, T.L., Handschuh, R.F., and Roberts, G.D. (2018, January 14–17). Results of NASA technical challenge to demonstrate two-speed drive for vertical lift vehicle. Proceedings of the American Helicopter Society 74th Annual Forum, Phoenix, AZ, USA.
9. Lewicki, D.G., DeSmidt, H., Smith, E.C., and Bauman, S.W. (2010). Two-Speed Gearbox Dynamic Simulation Predictions and Test Validation. (NASA/TM-2010-216363).
10. Kalinin, D.V. (2014, January 7–12). Multithreaded continuously variable transmission synthesis for next-generation helicopters. Proceedings of the 29th Congress of International Council of the Aeronautical Science, St. Petersburg, Russia.
11. A methodology for determining the optimal rotational speed of a variable rpm main rotor/turboshaft engine system
12. Karem, A.E. (1999). Optimum Speed Rotor. (No. 6,007,298), U.S. Patent.
13. Farnborough: a160 technical description: Shifting up a gear
14. Possibilities and difficulties for rotorcraft using variable transmission drive trains10.1007/s13272-016-0191-6 ↗
15. Model predictive idle speed control: Design, analysis, and experimental evaluation
16. Steiner, J.H. (2008). An Investigation of Performance Benefits and Trim Requirements of a Variable Speed Helicopter Rotor. [Master’s Thesis, The Pennsylvania State University].
17. Variable rotor speed control for an integrated helicopter/engine system10.1177/0954410013485010 ↗
18. A novel control method for turboshaft engine with variable rotor speed based on the ngdot estimator through lqg/ltr and rotor predicted torque feedforward10.1016/j.cja.2020.01.009 ↗
19. Research on Integrated Control Method of Tiltrotor with Variable Rotor Speed Based on Two-Speed Gearbox10.1515/tjj-2018-0004 ↗
20. Fundamental limitations to no-jerk gearshifts of multi-speed transmission architectures in electric vehicles10.1016/j.mechmachtheory.2021.104290 ↗
21. Robust control for an unmanned helicopter with constrained flapping dynamics10.1016/j.cja.2018.08.007 ↗
22. Ruddell, A. (1981). Advancing Blade Concept (ABC) Technology Demonstrator, U.S. Army Research and Technology Laboratories (AVRADCOM). TR-81-D-5.
23. Misté, G.A., and Benini, E. (2012, January 1). Performance of a Turboshaft Engine for Helicopter Applications Operating at Variable Shaft Speed. Proceedings of the ASME Gas Turbine Conference 2012, Mumbai, India. Paper Number: GTIndia2012-9505.10.1115/GTINDIA2012-9505 ↗
24. Miste, G. (2015). Variable Speed Rotor Helicopters: Optimization of Main Rotor-Turboshaft Engine Integration. [Ph.D. Thesis, Università degli Studi di Padova].
25. Dreier, M.E. (2007). Introduction to Helicopter and Tiltrotor Simulation, AIAA Press.10.2514/4.862083 ↗
26. Houghton, E.L., Capenter, P.W., Collicott, S.H., and Valentine, D.T. (2016). Aerodynamics for Engineering Students, Arnold. [7th ed.].
27. Wu, J., Yan, H., Liu, S., Zhang, Y., and Tan, W. (2022). Bond Graph-Based Approach to Modeling Variable-Speed Gearboxes with Multi-Type Clutches. Appl. Sci., 12.10.3390/app12126181 ↗
28. Study on Nonlinear Dynamics Characteristics of Dual Speed Dual Clutch Transmission System Based on Bond Graph10.1016/j.heliyon.2023.e20862 ↗
29. Felker, F.F. (1981). Performance and Loads Data from a Wind Tunnel Test of a Full-Scale Coaxial Hingeless Rotor Helicopter. (NASA-TM-81329).
30. Johnson, W. (2011). Lift-Offset Compound Design Background, X2TD, JMR, ME1AR.
31. Optimization of the Electrospinning Conditions by Box-Behnken Design to Prepare Poly (vinyl alcohol)/Chitosan Crosslinked Nanofibers