A Simple Methodology to Develop Bifilar, Quadrifilar, and Octofilar Calculable Resistors
Source abstract
Abstract
This paper describes the development of bifilar, quadrifilar, and octofilar Calculable Resistors (CRs). The research involves Evanohm-S and Isaohm wire heat treatment processes to achieve temperature coefficients less than 0.5 μ Ω / Ω / ∘ C in the CR’s wire resistance element, tests of different terminal–wire joining techniques, and construction aspects achieving a stability of less than 0.05 μ Ω / Ω /day. This kind of construction methodology has not been presented in detail in previous CR papers, and it is essential to accomplish the correct parameters of a CR. Without it, the development of a CR can take several months or even years. A comparison between CRs developed in this research and a CR from the Federal Institute of Metrology (METAS) in Switzerland was carried out. Measurement results between the 10 k Ω octofilar CR and the METAS 1 k Ω coaxial CR show an agreement better than 0.35 μ Ω / Ω through the audio-frequency range. Therefore, the octofilar CR can be used as an AC resistance reference with traceability to the quantum Hall resistance in DC.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Sensor Technology and Measurement Systems · Advanced MEMS and NEMS Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, Autonomous University of Querétaro, Querétaro 76010, Mexico
Electromagnetic Measurements Direction, Centro Nacional de Metrología (CENAM), Querétaro 76246, Mexico
Faculty of Physical-Mathematical Sciences, Autonomous University of Sinaloa, Culiacán 80000, Mexico
Basic and Applied Bioengineering Group, Faculty of Engineering, Autonomous University of Querétaro, Querétaro 76265, Mexico
Funding
Physikalisch-Technische Bundesanstalt
References (34)
Show source-provided references
1. Characterization of four-terminal-pair resistance standards: A comparison of measurements and theory10.1109/19.918118 ↗
2. A design for resistors of calculable a.c./d.c. resistance ratio10.1049/piee.1963.0046 ↗
3. Bohacek, J., and Wood, B.M. (2000). Octofilar resistors with calculable frequency dependence. Conf. Prec. Electr. Meas. Conf. Digest, 174–175.10.1109/CPEM.2000.850932 ↗
4. Four-terminal-pair networks as precision admittance and impedance standards10.1109/TCOME.1964.6539563 ↗
5. Properties of Wire for Resistors
6. Realization of the farad from the dc quantum Hall effect with digitally assisted impedance bridges10.1088/0026-1394/47/4/013 ↗
7. Impedance bridges: From Wheatstone to Josephson10.1088/1681-7575/aacf6c ↗
8. A Reconfigurable Four Terminal-Pair Digitally Assisted and Fully Digital Impedance Ratio Bridge10.1109/TIM.2018.2790538 ↗
9. Realization of an inductance scale traceable to the quantum Hall effect using an automated synchronous sampling system10.1088/0026-1394/47/6/008 ↗
10. Aitzaz, A., Kim, J., Kim, T., Park, K., and Cho, S. (2019). Electrical Characterization of Pork Tissue Measured by a Monopolar Injection Needle and Discrete Fourier Transform based Impedance Measurement. Appl. Sci., 9.10.3390/app9194049 ↗
11. Kim, J., Abbasi, M., Kim, T., Park, K., and Cho, S. (2019). Lock-in Amplifier-Based Impedance Detection of Tissue Type Using a Monopolar Injection Needle. Sensors, 19.10.3390/s19214614 ↗
12. Mansor, M., Takeuchi, M., Nakajima, M., Hasegawa, Y., and Ahmad, M. (2017). Electrical Impedance Spectroscopy for Detection of Cells in Suspensions Using Microfluidic Device with Integrated Microneedles. Appl. Sci., 7.10.3390/app7020170 ↗
13. Saddique, J., Cheng, X., Shi, H., Wu, R., and Zhang, Y. (2019). High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam as a Binder Free Electrode for Supercapacitors. Appl. Sci., 9.10.3390/app9153082 ↗
14. Tao, X., Rong, C., Lu, C., Huang, X., Zeng, Y., Hu, Z., and Liu, M. (2019). A Novel Approach to Reach Impedance Matching in Wireless Power Transfer Systems. Appl. Sci., 9.10.3390/app9050976 ↗
15. Llonch-Masachs, M., Heredero-Peris, D., Chillón-Antón, C., Montesinos-Miracle, D., and Villafáfila-Robles, R. (2019). Impedance Measurement and Detection Frequency Bandwidth, a Valid Island Detection Proposal for Voltage Controlled Inverters. Appl. Sci., 9.10.3390/app9061146 ↗
16. Kwiecien, M., Huck, M., Badeda, J., Zorer, C., Komut, K., Yu, Q., and Sauer, D. (2018). Variation of Impedance in Lead-Acid Batteries in the Presence of Acid Stratification. Appl. Sci., 8.10.3390/app8071018 ↗
17. Kwiecien, M., Badeda, J., Huck, M., Komut, K., Duman, D., and Sauer, D. (2018). Determination of SoH of Lead-Acid Batteries by Electrochemical Impedance Spectroscopy. Appl. Sci., 8.10.3390/app8060873 ↗
18. Impedance spectroscopy characterisation of highly efficient silicon solar cells under different light illumination intensities10.1039/b812468j ↗
19. Application and Validation of an Impedance-Based Real Time Cell Analyzer to Measure the Toxicity of Nanoparticles Impacting Human Bronchial Epithelial Cells10.1021/es301599f ↗
20. An Analysis of Electrical Impedance Measurements Applied for Plant N Status Estimation in Lettuce (Lactuca sativa)10.3390/s140711492 ↗
21. Khan, M., Mobin, M., Zahid, A., and Alamri, S. (2017). Fertilizers and Their Contaminants in Soils, Surface and Groundwater. Ref. Module Earth Syst. Environ. Sci.10.1016/B978-0-12-809665-9.09888-8 ↗
22. Lotsu, S., Yoshida, Y., Fukuda, K., and He, B. (2019). Effectiveness of a Power Factor Correction Policy in Improving the Energy Efficiency of Large-Scale Electricity Users in Ghana. Energies, 12.10.3390/en12132582 ↗
23. EUROMET Project 432: Frequency performance of 12 906 Ω and 6453 Ω reference resistors for ac quantum Hall effect experiments10.1088/0026-1394/39/2/12 ↗
24. Pacheco-Estrada, A.H., and Overney, F. (2018, January 8–13). Frequency Dependence Evaluation of CENAM Calculable Resistors. Proceedings of the 2018 Conference on Precision Electromagnetic Measurements (CPEM 2018), Paris, France.10.1109/CPEM.2018.8500922 ↗
25. Awan, S., Kibble, B., and Schurr, J. (2011). Coaxial Electrical Circuits for Interference-Free Measurements, The Institution of Engineering and Technology.10.1049/PBEL013E ↗
26. Calculable resistors of coaxial design10.1088/0957-0233/20/9/095104 ↗
27. Fujiki, H., Domae, A., and Nakamura, Y. (2002, January 16–21). Analysis of the time constant for the bifilar calculable AC/DC resistors. Proceedings of the Conference Digest Conference on Precision Electromagnetic Measurements, Ottawa, ON, Canada.
28. Kibble, B.P., Hartland, A., and Chua, S.W. (1997, January 4–6). Calculable AC/DC resistor for AC Quantized Hall Resistance experiments. Proceedings of the BEMC 97 8th International Conference on Electromagnetic Measurement Digest, London, UK.
29. Rosa, E.B., and Grover, F.W. (1911). Formulas and Tables for the Calculation of Mutual and Self-Induction.10.6028/bulletin.185 ↗
30. Calculation of the partial capacitance in a system of conductors within the calculable resistor10.1109/19.368073 ↗
31. Carpenter Technology Corporation (2013). Evanohm Alloy S. (Number 3,598,578), U.S. Patent.
32. Isotek Corporation (2020, February 26). An Isabellenhütte Company. Available online: www.isotekcorp.com.
33. Broadband fully automated digitally assisted coaxial bridge for high accuracy impedance ratio measurements10.1088/0026-1394/53/3/918 ↗
34. Linear frequency dependence in AC resistance measurement10.1109/TIM.2005.843583 ↗