journal article·2021-12-15Open access

Research on Real-Time Monitoring and Performance Optimization of Suspension System in Maglev Train

Xu Zhou, Tao Wen, Zhiqiang Long

Applied Sciences· Volume 11· Issue 24

Abstract

With the success of the commercial operation of the maglev train, the demand for real-time monitoring and high-performance control of the maglev train suspension system is also increasing. Therefore, a framework for performance monitoring and performance optimization of the maglev train suspension system is proposed in this article. This framework consists of four parts: plant, feedback controller, residual generator, and dynamic compensator. Firstly, after the system model is established, the nominal controller is designed to ensure the stability of the system. Secondly, the observer-based residual generator is identified offline based on the input and output data without knowing the accurate model of the system, which avoids the interference of the unmodeled part. Thirdly, the control performance is monitored and evaluated in real time by analyzing the residual and executing the judgment logic. Fourthly, when the control performance of the system is degraded or not satisfactory, the dynamic compensator based on the residual is updated online iteratively to optimize the control performance. Finally, the proposed framework and theory are verified on the single suspension experimental platform and the results show the effectiveness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Electrical Contact Performance and Analysis · Advanced Algorithms and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Intelligence Science and Technology, National University of Defense Technology, Changsha 410073, China

Funding

13th Five-year National Key Research and Development Program of China

References (42)

Show source-provided references
1. Liu, Z., Long, Z., and Li, X. (2015). Maglev Trains, Springer Tracts in Mechanical Engineering; Springer.10.1007/978-3-662-45673-6 ↗
2. Levitation control of permanent magnet electromagnetic hybrid suspension maglev train
3. Control rehabilitation impact on production efficiency of ammonia synthesis installation10.1021/acs.iecr.6b02907 ↗
4. Ordys, A., Uduehi, D., and Johnson, M. (2007). Process Control Performance Assessment from Theory to Implementation, Springer.10.1007/978-1-84628-624-7 ↗
5. The current state of control loop performance monitoring a survey of application in industry10.1016/j.jprocont.2015.11.002 ↗
6. Bazanella, A.S., Campestrini, L., and Eckhard, D. (2012). Data-Driven Controller Design: The H2 Approach, Springer.
7. Plug-and play control—Modifying control systems online10.1109/TCST.2011.2174060 ↗
8. Fault detection based on statistical multivariate analysis and microarray visualization10.1109/TII.2009.2030793 ↗
9. Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information10.1016/j.jprocont.2010.07.002 ↗
10. Robust and efficient rule extraction through data summarization and its application in welding fault diagnosis10.1109/TII.2008.2002920 ↗
11. Russell, E., Chiang, L., and Braatz, R. (2000). Data-Driven Methods for Fault Detection and Diagnosis in Chemical Processes, Springer.10.1007/978-1-4471-0409-4 ↗
12. Chiang, L., Russell, E., and Braatz, R. (2001). Fault Detection and Diagnosis in Industrial Systems, Springer.10.1007/978-1-4471-0347-9 ↗
13. Online monitoring of steel casting processes using multivariate statistical technologies: From continuous to transitional operations10.1016/j.jprocont.2006.03.005 ↗
14. Qin, S.J. (July, January 30). Data-driven fault detection and diagnosis for complex industrial processes. Proceedings of the IFAC SAFEPROCESS Symposium, Barcelona, Spain.
15. Survey on data-driven industrial process monitoring and diagnosis10.1016/j.arcontrol.2012.09.004 ↗
16. From model, signal to knowledge: A data-driven perspective of fault detection and diagnosis10.1109/TII.2013.2243743 ↗
17. Industrie 4.0: Hit or hype? [industry forum]10.1109/MIE.2014.2312079 ↗
18. A Plug-and-Play monitoring and control architecture for disturbance compensation in rolling mills10.1109/TMECH.2016.2636337 ↗
19. Lifetime prediction of IGBT modules in suspension choppers of medium/low-speed maglev train using an energy-based approach10.1109/TPEL.2018.2812732 ↗
20. Performance degradation monitoring for onboard speed sensors of trains10.1109/TITS.2012.2188629 ↗
21. Parallel control and management for high-speed maglev systems10.1109/TITS.2016.2577037 ↗
22. Fault diagnosis to suspension system of maglev train based on fuzzy fault tree
23. Åström, K.J., and Hägglund, T. (1995). PID Controllers: Theory, Design, and Tuning, The Instrumentation, Systems, and Automation Society. [2nd ed.].
24. Esch, J., Konings, T., and Ding, S.X. (2013, January 10–13). Optimal performance tuning of a PI-controller for an integrator plant with uncertain parameters as a convex optimisation problem. Proceedings of the IEEE 52nd Conference on Decision and Control, Florence, Italy.10.1109/CDC.2013.6760171 ↗
25. O’Dwyer, A. (2009). Handbook of PI and PID Controller Tuning Rules, Imperial College Press. [3rd ed.].10.1142/9781848162433 ↗
26. Yu, C.-C. (1999). Autotuning of PID Controllers: Relay Feedback Approach, Springer.10.1007/978-1-4471-3636-1 ↗
27. Hao, H. (2014). Key Performance Monitoring and Diagnosis in Industrial Automation Processes. [Ph.D. Thesis, University of Duisburg-Essen].
28. Huang, B., and Kadali, R. (2008). Dynamic Modeling, Predictive Control and Performance Monitoring: A Data-Driven Subspace Approach, Springer.
29. A distribution independent data-driven design scheme of optimal dynamic fault detection systems10.1016/j.jprocont.2020.09.004 ↗
30. Real-time implementation of fault-tolerant control systems with performance optimization10.1109/TIE.2013.2273477 ↗
31. A novel scheme for key performance indicator prediction and diagnosis with application to an industrial hot strip mill10.1109/TII.2012.2214394 ↗
32. Real-time optimization of automatic control systems with application to BLDC motor test rig10.1109/TIE.2016.2577623 ↗
33. Optimal design of residual driven dynamic compensator using iterative algorithms with guaranteed convergence10.1109/TSMC.2015.2450203 ↗
34. Data-driven design and optimization of feedback control systems for industrial applications10.1109/TIE.2014.2301757 ↗
35. Development and application of the maglev transportation system10.1063/1.2902765 ↗
36. Fault-Tolerant Control of Magnetic Levitation System Based on State Observer in High Speed Maglev Train10.1109/ACCESS.2019.2898108 ↗
37. Characteristics optimization of the Maglev train hybrid suspension system using genetic algorithm10.1109/TEC.2014.2388155 ↗
38. Xu, Y., Long, Z., Zhao, Z., Zhai, M., and Wang, Z. (2020). Real-Time Stability Performance Monitoring and Evaluation of Maglev Trains’ Levitation System: A Data-Driven Approach. IEEE Trans. Intell. Transp. Syst., 1–12.
39. Ding, S.X. (2014). Data-Driven Design of Fault Diagnosis and Fault-Tolerant Control Systems, Springer.10.1007/978-1-4471-6410-4 ↗
40. Data-driven realizations of kernel and image representations and their application to fault detection and control system design10.1016/j.automatica.2014.08.022 ↗
41. A real-time performance recovery framework for vision-based control systems10.1109/TIE.2020.2967678 ↗
42. Ruder, S. (2016). An overview of gradient descent optimization algorithms. arXiv.