journal article·2022-02-23Open access

Dilatant Nature of Sand Shear Strength

Zenon Szypcio, Katarzyna Dołżyk-Szypcio, Jacek Mierczyński

Applied Sciences· Volume 12· Issue 5

Abstract

Many shear strength criteria have been proposed for soils. The Mohr–Coulomb, Matsuoka–Nakai, and Lade–Duncan criteria are more frequently used for sands. For sands sheared in drained conditions, the general stress–dilatancy relationship is obtained from the frictional state concept. It is shown that, in failure states, the dilatancy for triaxial compression, the plane strain condition (biaxial compression), triaxial extension, and general states can be expressed by the ratio of the volumetric and axial strain increments for triaxial compression. By using the frictional state concept, the shear strength of sand for general states can be expressed by the critical state angle and the dilatancy for drained triaxial compression. It is shown that the calculated shear strength of the sand is similar to that obtained by using the Mohr–Coulomb, Matsuoka–Nakai, and Lade–Duncan criteria for the non-dilative, moderate-dilative, and high-dilative behaviors of sand, respectively. Therefore, the shear strength of sand has a purely dilative nature for deformations without breakage effects.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Civil Engineering and Environmental Sciences, Bialystok University of Technology, 15-351 Białystok, Poland

Institute of Hydro-Engineering of Polish Academy of Science, 80-328 Gdańsk, Poland

References (64)

Show source-provided references
1. Atkinson, J. (2007). The Mechanics of Soils and Foundations, Taylor & Francis Group. [2nd ed.].
2. Matsuoka, H., and Nakai, T. (1974). Stress-Deformations and Strength Characteristics of Soils under Three Different Principal Stresses, Japan Society of Civil Engineers.10.2208/jscej1969.1974.232_59 ↗
3. Elastoplastic Stress-Strain Theory for Cohesionless Soil10.1061/AJGEB6.0000204 ↗
4. Effects of Initial Anisotropic Fabric and σ2 on Strength and Deformation Characteristics of Sand10.3208/sandf1972.28.89 ↗
5. General Strength Criterion for Geomaterials Including Anisotropic Effect10.1061/(ASCE)GM.1943-5622.0000082 ↗
6. Cao, W., Wang, R., and Zhang, J.-M. (2017). Formulation of Anisotropic Strength Criteria for Cohesionless Granular Material. Int. J. Geomech., 17.10.1061/(ASCE)GM.1943-5622.0000861 ↗
7. The strength and dilatancy of sands10.1680/geot.1986.36.1.65 ↗
8. Some Experiments on the Influence of Strain Conditions on the Shear Strength of Sand10.1680/geot.1964.14.2.143 ↗
9. Angles of friction and dilatancy of sand10.1680/geot.1996.46.1.145 ↗
10. Lade, P.V., and Lee, K.L. (1976). Engineering Properties of Soils, Report UCLA-ENG-7652; University of California.
11. Das, B.M. (2008). Advanced Soil Mechanics, Taylor & Francis Group. [3rd ed.].
12. Assessment of test data for selection of 3-D failure criterion for sand10.1002/nag.471 ↗
13. Drained Sand Behaviour in Axisymmetric Tests at High Pressures10.1061/(ASCE)0733-9410(1996)122:2(109) ↗
14. Sulem, J. Comparison of extension and compression triaxial tests for dense sand and sandstone10.1007/s11440-008-0068-x ↗
15. A Note on the Drained Strength of Sand Under Generalized Strain Conditions10.1680/geot.1969.19.1.144 ↗
16. Correspondence to “A Note on the Drained Strength of Sand Under Generalized Strain Conditions. Green, G.E., Bishop, A.W., Géotechnique 1969, 19, 144–149“10.1680/geot.1970.20.2.210 ↗
17. Deformation of sand at failure10.1061/JSFEAQ.0001177 ↗
18. Ladd, C.C., Foote, R., Ishihara, K., Schlosser, F., and Poulos, H.G. (1977, January 11). Stress-Deformation and Strength Characteristics. Proceedings of the 9th International Conference on Soil Mechanics and Foundation Engineering, Tokyo, Japan.
19. Kulhawy, F.H., and Mayne, P.W. (1990). Manual on Estimating Soil Properties for Foundation Design, EL-6800 Research Project 1493-6; Cornell University.
20. Taylor, D.W. (1948). Fundamentals of Soil Mechanics, John Wiley and Sons.10.1097/00010694-194808000-00008 ↗
21. The Relationship Between the Shear Strength of Sands in Triaxial Compression, Plane Strain and Direct Shear10.1680/geot.1969.19.1.75 ↗
22. Stress-dilatancy for soils. Part I: The frictional state theory10.1515/sgem-2016-0030 ↗
23. Stress-dilatancy for soils. Part II: Experimental validation for triaxial tests10.1515/sgem-2016-0031 ↗
24. Stress-Dilatancy for Soils. Part III: Experimental Validation for the Biaxial Condition10.1515/sgem-2017-0007 ↗
25. Stress-Dilatancy for Soils. Part IV: Experimental Validation for Simple Shear Conditions10.1515/sgem-2017-0008 ↗
26. Dołżyk-Szypcio, K. (2020). Stress-Dilatancy Relationship of Erksak Sand under Drained Triaxial Compression. Geosciences, 10.10.3390/geosciences10090353 ↗
27. Stress-dilatancy of gravel for triaxial compression tests10.2478/sggw-2018-0010 ↗
28. Stress-dilatancy relationship for railway ballast10.2478/sgem-2018-0018 ↗
29. Stress-Dilatancy of Rounded and Angular Rockfill Materials
30. The Behaviour of an Assembly of Rotund, Rigid, Cohesionless Particles. Part III
31. Jamiołkowski, M., Lo-Presti, D.C.F., and Manassero, M. (2001, January 5–6). Evolution of Relative Density and shear Strength of Sands from CPT and DMT. Proceedings of the Symposium on Soil Behavior and Soft Ground Construction Honoring Charles C. “Chuck” Ladd, Boston, MA, USA. ASCE Geotechnical Special Publication No.119.
32. State-Dependent Strength of Sands from the Perspective of United Modeling10.1061/(ASCE)1090-0241(2004)130:2(186) ↗
33. Hanna, A.M., Masoud, N., and Youssef, H. (1987). Prediction of plane strain angles of shear resistance from triaxial tests results. Prediction and Performance in Geotechnical Engineering, University of Calgary.
34. Vermeer, P.A. (1998). Zunmodellierung des Mechnischenverhaltens von Reibungsmaterlean, Institute fur Geotechnik, Universitat Stuttgart.
35. Undrained shear strength for liquefaction flow failure analysis10.1139/t95-076 ↗
36. Use of laboratory data to confirm yield and liquefied strength ratio concepts10.1139/t03-058 ↗
37. Advantages and limitations of an α-plasticity model for sand10.1007/s11440-019-00877-9 ↗
38. The critical states of sands10.1680/geot.1991.41.3.365 ↗
39. Steady State Testing of Loose Sands: Limiting Minimum Density10.1061/(ASCE)0733-9410(1990)116:2(332) ↗
40. State-boundary surface for very loose sand and its practical implications10.1139/t94-040 ↗
41. Factors Affecting Apparent Position of Steady-State Line10.1061/(ASCE)1090-0241(1997)123:3(281) ↗
42. Liquefaction and flow failure during earthquakes10.1680/geot.1993.43.3.351 ↗
43. On the Measurement of Critical State Parameters of Dense Granular Soils10.1520/GTJ10264J ↗
44. Prearo, C. (2015). Determination of Cyclic Resistance of Clean Sands from Cone Penetration Test Based on State Parameter. [Ph.D. Thesis, University of Ferrara].
45. Experimental evaluation and extension of a simple critical state model for sand10.1007/s10035-005-0209-y ↗
46. Unified Sand Model Based on the Critical State and Generalized Plasticity10.1061/(ASCE)0733-9399(2006)132:12(1380) ↗
47. Wang, J. (2005). The Stress-Strain and Strength Characteristics of Portaway Sand. [Ph.D. Thesis, University of Nottingham].
48. Yamamuro, J.A., and Kaliakin, Y.N. (2005). Selection of material parameters for sands using MIT-SI model. Soil Constitutive Models. Evaluation, Selection, and Calibration, ASCE Geotechnical Special Publication No. 128; ASCE.
49. Behaviour of dry sand tested in a large triaxial apparatus10.1680/geot.1984.34.2.183 ↗
50. Static liquefaction of sand in plane strain10.1139/t06-078 ↗
51. Boundary condition, anisotropy and sample shape effects on the stress-strain behaviour of sand in triaxial compression and plane strain10.1680/geot.1975.25.2.333 ↗
52. Incremental Strain Rate Ratios and Strength of Sand in the Triaxial Test10.1680/geot.1966.16.4.338 ↗
53. Soga, K., Kumar, K., Biscontin, G., and Kuo, M. (2015). Modelling the Shear Strength and Dilatancy of Dry Sand in Triaxial Compression Tests. Geomechanics from Micro to Macro, Taylor & Francis Group.
54. Strength and deformation characteristics of sand in plane strain compression at extremely low pressures10.3208/sandf1972.26.65 ↗
55. Strength and deformation characteristics of sand in torsional simple shear10.3208/sandf1972.28.3_131 ↗
56. Leussink, H., Blinde, A., and Abel, P.-G. (1966). Versuche über die Sohldruckverteilung unter Starren Gründungskörpern auf Kohäsionslosem Sand, Veröffentlichungen des Instituts für Bodenmechanik und Grundbau der Technischen Hochschule Fridericiana in Karlsruhe.
57. Granular soils: From DEM simulation to constitutive modeling10.1007/s11440-020-00951-7 ↗
58. Vasko, A., El Ghoraiby, M., and Manzari, M.T. (2014). An Investigation into the Behaviour of Ottawa Sand under Monotonic and Cyclic Shear Tests, Department of Civil and Environmental Engineering, George Washington University.
59. Green, G.E. (1971). Strength and deformation of sand measured in an independent stress control cell. Proceedings, Roscoe Memorial Symposium on Stress-Strain Behaviour of Soil, Cambridge University.
60. A Simple Constitutive Model for Granular Soils: Modified Stress—Dilatancy Approach10.1016/S0266-352X(98)00004-4 ↗
61. Hellings, J.E., and Burland, J.B. (1997, January 6–12). Strength and deformation characteristics of a silty sand. Proceedings of the Fourteenth International Conference on Soil Mechanics and Foundations Engineering, Hamburg, Germany.
62. Independent stress control and triaxial extension tests on sand10.1680/geot.1976.26.4.551 ↗
63. Stress-dilation of undisturbed sand samples in drained and undrained triaxial shear10.3208/sandf.47.27 ↗
64. A new yield and failure criterion for geomaterials10.1680/geot.2008.58.2.125 ↗