Black-Box Mathematical Modeling and Heuristic Optimizing of Hampson-Linde Cycle Based on Joule-Thomson Effect and Ohm’s Law for Thermal Circuits
Source abstract
Abstract
Nowadays, due to recent global climate changes, replacing non-environmental friendly technology with more sustainable energy is desired. Thus, researchers are designing new, environmentally friendly products, for which some use the black box modeling method. Therefore, the presented work represents a Hampson-Linde cryogenic cooler model based on Joule-Thomson Effect and Ohm’s Law for thermal circuits, optimized using a parallel “Particle Swarm Optimization” (PSO) algorithm. An innovative feature of this model is that it uses two translations—from electrical to the thermal domain and a simplifying time domain—and is implemented to provide results using less demanding computational resources and simulation time. Furthermore, a possibility for superconductive states is presented for commonly used category II superconductors. Last, but not least, based on the predicted output temperature, models of more complex processes could be developed, such as a model for the Hyperloop concept.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Physics of Superconductivity and Magnetism · Advanced Thermodynamics and Statistical Mechanics · Superconductivity in MgB2 and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Optoelectronics Group, Basis of Electronics Department, Faculty of Electronics, Telecommunications, and Information Technology, UTCN, 400114 Cluj-Napoca, Romania
Funding
Romanian Ministry of Education and Research
References (20)
Show source-provided references
1. Snitchler, G. (2010, January 21–24). Progress on High Temperature Superconductor Propulsion Motors and Direct Drive Wind Generators. Proceedings of the 2010 International Power Electronics Conference—ECCE ASIA, Sapporo, Japan.10.1109/IPEC.2010.5542327 ↗
2. Tipparach, U. (2002). Fabrication of And Transport Studies On YBa2Cu3O7/PrBa2(Cu1-xMx)3O7 Type Multilayers. [Ph.D. Thesis, University of North Dakota].10.1016/S0921-4534(01)00807-3 ↗
3. Winnefeld, C., Kadyk, T., Bensmann, B., Krewer, U., and Hanke-Rauschenbach, R. (2018). Modelling and Designing Cryogenic Hydrogen Tanks for Future Aircraft Applications. Energies, 11.10.3390/en11010105 ↗
4. Paglini, R., Gandiglio, M., and Lanzini, A. (2022). Technologies for Deep Biogas Purification and Use in Zero-Emission Fuel Cells Systems. Energies, 15.10.3390/en15103551 ↗
5. Ichkitidze, L.P., Belodedov, M.V., Gerasimenko, A.Y., Telyshev, D.V., and Selishchev, S.V. (2021). Possibility Noninvasive Detection Magnetic Particles in Biological Objects. Eng. Proc., 6.10.3390/I3S2021Dresden-10137 ↗
6. Hartmann, C., Nøland, J.K., Nilssen, R., and Mellerud, R. (2022). Dual Use of Liquid Hydrogen in a Next-Generation PEMFC-Powered Regional Aircraft with Superconducting Propulsion. IEEE Trans. Transp. Electrif.10.1109/TTE.2022.3170827 ↗
7. Bizon, N., Carcadea, E., Iliescu, M., Raboaca, M.S., Manta, I., and Sorlei, S.I. (2021, January 1). Estimation of Hydrogen Consumption for Proton-Exchange Membrane Fuel Cells Systems. Proceedings of the 2021 13th International Conference on Electronics, Computers and Artificial Intelligence (ECAI), Pitesti, Romania.10.1109/ECAI52376.2021.9515021 ↗
8. Wood, T.S., and Graber, V. (2022). Superconducting Phases in Neutron Star Cores. Universe, 8.10.3390/universe8040228 ↗
9. Huebener, R.P. (2019). The Path to Type-II Superconductivity. Metals, 9.10.3390/met9060682 ↗
10. Superconducting quantum interference device instruments and applications10.1063/1.2354545 ↗
11. Application of superconductors for automobiles
12. Design Optimization of a 2G HTS Magnet for Subsonic Transportation
13. A Direct Thrust Control Scheme for Linear Permanent Magnet Synchronous Motor Based on Online Duty Ratio Control10.1109/TPEL.2015.2475400 ↗
14. Particle Swarm Optimization from Theory to Applications10.4018/IJRSDA.2018040101 ↗
15. A per-spective on conventional high-temperature superconductors at high pressure: Methods and materials10.1016/j.physrep.2020.02.003 ↗
16. Windmeier, C., and Barron, R. (2013). Ullmann’s Encyclopedia of Industrial Chemistry: Cryogenic Technology, Wiley-VCH Verlag GmbH & Co. KGaA.10.1002/14356007.b03_20.pub2 ↗
17. Lerou, P.P.P.M., Jansen, H.V., Venhorst, G.C.F., Burger, J., Veenstra, T., Holland, H.J.M., Brake, H.J.M., Elwenspoek, M., and Rogalla, H. (2005). Progress in Micro Joule-Thomson Cooling at Twente University, Springer.10.1007/0-387-27533-9_62 ↗
18. Exergoeconomic optimization of liquefying cycle for noble gas argon10.1007/s00231-018-2501-5 ↗
19. Khosroabadi, H. Shahbaz, F.; Akbarnejad, R. Structural Phase of Y358 Superconductor Comparison with Y12310.1007/s10948-012-1611-4 ↗
20. Yang, S., Liu, Z., and Fu, B. (2019). Simulation and Evaluation on the Dynamic Performance of a Cryogenic Turbo-Based Reverse Brayton Refrigerator. Appl. Sci., 9.10.3390/app9030531 ↗