journal article·2022-11-04Open access

Experimental and Numerical Methods for the Evaluation of Sound Radiated by Vibrating Panels Excited by Electromagnetic Shakers in Automotive Applications

Anna Tira, Daniel Pinardi, Angelo Farina, Alessio Figuretti, Davide Palmieri

Applied Sciences· Volume 12· Issue 21

Abstract

Numerical simulations are increasingly employed in the automotive industry to optimize the design stage, reduce prototype testing, and shorten the time to market. The aim of the presented research is the development of a fast and reliable method for the prediction of the sound field generated outside a vehicle by vibrating panels under electromagnetic shaker excitation. Despite that multi-physics numerical simulation software already link mechanical vibrations to their acoustic effect, they show a drawback when calculating the exterior sound field produced by a vibrating panel: the presence of a car model to separate front and rear radiations avoiding the acoustic short circuit, and an air volume surrounding it are required, thus increasing the model complexity and calculation time. Both problems can be overcome with the presented methodology: only the mechanical vibration of the panel is solved numerically, and the radiated sound field is then calculated postprocessing, relying on Rayleigh’s integral. At first, the method’s validation is presented through laboratory experiments; then, a real vehicle panel is analyzed. Comparisons between the finite element method (FEM) simulations and experimental measurements showed very good agreement while keeping the calculation time low for both the laboratory and on-vehicle tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Vehicle Noise and Vibration Control · Aerodynamics and Fluid Dynamics Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering and Architecture, University of Parma, 43124 Parma, Italy

McLaren Automotive, 43710 Santa Oliva, Spain

Funding

McLaren Automotive

References (32)

Show source-provided references
1. Misdariis, N., and Pardo, L.-F. (2017, January 27–30). The Sound of Silence of Electric Vehicles—Issues and Answers. Proceedings of the InterNoise, Hong-Kong, China.
2. Du, X., Liao, X., Fu, Q., and Zong, C. (2022). Vibro-Acoustic Analysis of Rectangular Plate-Cavity Parallelepiped Coupling System Embedded with 2D Acoustic Black Holes. Appl. Sci., 12.10.3390/app12094097 ↗
3. Guo, Z., Pan, J., and Sheng, M. (2019). Vibro-Acoustic Performance of a Sandwich Plate with Periodically Inserted Resonators. Appl. Sci., 9.10.3390/app9183651 ↗
4. Osterziel, J., Zenger, F.J., and Becker, S. (2017). Sound Radiation of Aerodynamically Excited Flat Plates into Cavities. Appl. Sci., 7.10.3390/app7101062 ↗
5. A State-Space Modeling Approach for Active Structural Acoustic Control
6. Roberts, M., Grieco, J., and Ellis, C. (2000, January 19–22). Diffuse-field Radiators in Automotive Sound System Design. Proceedings of the 108th Audio Engineering Society Convention, Paris, France.
7. Dhandole, S., and Modak, S.V. (2007, January 19–22). Review of vibro-acoustics analysis procedures for prediction of low frequency noise inside a cavity. Proceedings of the 25th Conference & Exposition on Structural Dynamics, Orlando, FL, USA.
8. Ma, X., Wang, L., and Xu, J. (2019). Active Vibration Control of Rib Stiffened Plate by Using Decentralized Velocity Feedback Controllers with Inertial Actuators. Appl. Sci., 9.10.3390/app9153188 ↗
9. Belicchi, C., Opinto, A., Martalo, M., Tira, A., Pinardi, D., Farina, A., and Ferrari, G. (2022, January 22–24). ANC: A low-cost implementation perspective. Proceedings of the 12th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, Graz, Austria.10.4271/2022-01-0967 ↗
10. Tripodi, C., Costalunga, A., Ebri, L., Vizzaccaro, M., Cattani, L., Ugolotti, E., and Nili, T. (2018, January 23–26). Experimental Results on Active Road Noise Cancellation in Car Interior. Proceedings of the 144th Audio Engineering Society Convention, Milan, Italy.
11. Tsuruta-Hamamura, M., Kobayashi, T., Kosuge, T., and Hasegawa, H. (2022). The Effect of a ‘Design-of-Awareness’ Process on Recognition of AVAS Sound of Quiet Vehicles. Appl. Sci., 12.10.3390/app12010157 ↗
12. Chatterjee, A., Ranjan, V., Azam, M.S., and Rao, M. (2019). Comparison for the Effect of Different Attachment of Point Masses on Vibroacoustic Behavior of Parabolic Tapered Annular Circular Plate. Appl. Sci., 9.10.3390/app9040745 ↗
13. Anerao, N., and Kumar, T. (2021, March 05). Vibro-Acoustic Reciprocity Analysis Using Dodecahedral Sound Source and Its Application for Material Assessment. Available online: https://www.researchgate.net/profile/Nitesh-Anerao/publication/349830062_Vibro-Acoustic_reciprocity_analysis_using_dodecahedral_sound_source_and_it’s_application_for_material_assessment/links/60427d114585154e8c78a0fa/Vibro-Acoustic-reciprocity-analysis-using-dodecahedral-sound-source-and-its-application-for-material-assessment.pdf.
14. The prediction of measurement variability in an automotive application by the use of a coherence formulation10.1177/0954407017734768 ↗
15. Scislo, L. (2021, January 22–25). Quality Assurance and Control of Steel Blade Production Using Full Non-Contact Frequency Response Analysis and 3D Laser Doppler Scanning Vibrometry System. Proceedings of the 2021 11th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Cracow, Poland.10.1109/IDAACS53288.2021.9661060 ↗
16. Scislo, L., and Guinchard, M. (2019, January 7–11). Non-invasive Measurements of Ultra-Lightweight Composite Materials using Laser Doppler Vibrometry System. Proceedings of the 26th International Congress on Sound and Vibration, Montreal bridges, QC, Canada. Available online: https://www.researchgate.net/publication/358090716_Non-invasive_measurements_of_ultra-lightweight_composite_materials_using_Laser_Doppler_Vibrometry_system.
17. Application of laser vibrometer for the study of loudspeaker dynamics10.1016/j.matpr.2017.06.044 ↗
18. Molina-Viedma, Á., López-Alba, E., Felipe-Sesé, L., Díaz, F., Rodríguez-Ahlquist, J., and Iglesias-Vallejo, M. (2018). Modal Parameters Evaluation in a Full-Scale Aircraft Demonstrator under Different Environmental Conditions Using HS 3D-DIC. Materials, 11.10.3390/ma11020230 ↗
19. Damage assessment in a sandwich panel based on full-field vibration measurements10.1016/j.jsv.2017.11.048 ↗
20. Full-Field Modal Analysis by Using Digital Image Correlation Technique
21. Pinardi, D., Farina, A., and Park, J.-S. (2021, January 8–10). Low Frequency Simulations for Ambisonics Auralization of a Car Sound System. Proceedings of the 2021 Immersive and 3D Audio: From Architecture to Automotive (I3DA), Bologna, Italy.10.1109/I3DA48870.2021.9610959 ↗
22. Pinardi, D., Riabova, K., Binelli, M., Farina, A., and Park, J.-S. (2021, January 8–10). Geometrical Acoustics Simulations for Ambisonics Auralization of a Car Sound System at High Frequency. Proceedings of the 2021 Immersive and 3D Audio: From Architecture to Automotive (I3DA), Bologna, Italy.10.1109/I3DA48870.2021.9610977 ↗
23. Misak, S., Pokorny, V., and Kacor, P. (2015). Modeling of Acoustic Short Circuits. Intelligent Data Analysis and Applications, Springer.10.1007/978-3-319-21206-7_11 ↗
24. Tira, A., Pinardi, D., Belicchi, C., Farina, A., Figuretti, A., and Izzo, S. (2022, January 22–24). ANC: A Low-Cost Implementation Perspective. Proceedings of the 12th International Styrian Noise, Vibration and Harshness Congress: The European Automotive Noise Conference, Graz, Austria.
25. COMSOL (2022, October 26). Acoustics Module User’s Guide. Available online: https://doc.comsol.com/5.4/doc/com.comsol.help.aco/AcousticsModuleUsersGuide.pdf.
26. The historical bases of the Rayleigh and Ritz methods10.1016/j.jsv.2004.12.021 ↗
27. SH-waves in laminated plates10.1090/S0033-569X-06-00992-1 ↗
28. Long-Wave Asymptotics of Lamb Waves10.3103/S0025654417060097 ↗
29. Measurements of loudspeakers with a laser doppler vibrometer and the exponential sine sweep excitation technique10.17743/jaes.2017.0017 ↗
30. Active control of structurally radiated sound from plates10.1121/1.419759 ↗
31. Klippel, W., and Schlechter, J. (2008, January 2–5). Distributed Mechanical Parameters Describing Vibration and Sound Radiation of Loudspeaker Drive Units. Proceedings of the 125th Audio Engineering Society Convention, San Francisco, CA, USA.
32. Farina, A. (2000, January 19–22). Simultaneous Measurement of Impulse Response and Distortion with a Swept-Sine Technique. Proceedings of the 108th Audio Engineering Society Convention, Paris, France.