Thermal Stability of Self-Assembled 3-Aminopropyltrimethoxysilane Diffusion Barrier Terminated by Carboxyl Groups
Source abstract
Abstract
The carboxyl-terminated 3-aminopropyltrimethoxysilane (APTMS) self-assembled monolayer (SAM) diffusion barrier was prepared onto a Si substrate via molecular self-assembly and graft modification technology. The SAM was afterward coated with a copper film via radio-frequency (RF) magnetron sputtering. In order to study the thermal stability of the diffusion barrier, the sample was subsequently annealed for 60 min in an Ar environment at the temperatures of 350 °C, 400 °C, 450 °C, 500 °C, and 550 °C. The results revealed that carboxyl modification enabled one to increase the barrier breakdown temperature of the APTMS diffusion barrier layer by about 100 °C, which was sufficient to effectively inhibit the copper diffusion at 500 °C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and devices · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China
Key Laboratory of Superlight Material and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001, China
Institute of Surface Science and Technology, Harbin Engineering University, Harbin 150001, China
Funding
Natural Science Foundation of Heilongjiang Province
References (42)
Show source-provided references
1. Comparison of Cu and Co Integration with Porous Low-k SiOCH Dielectrics10.1016/j.tsf.2020.138010 ↗
2. Oliveira, B.M.C., Santos, R.F., Piedade, A.P., Ferreira, P.J., and Vieira, M.F. (2022). Co-W Barrier Layers for Metallization of Copper Interconnects: Thermal Performance Analysis. Nanomaterials, 12.10.3390/nano12101752 ↗
3. Thermal stability of barrierless Cu-Ni-Sn films10.1016/j.apsusc.2014.01.084 ↗
4. A novel diffusion barrier of electrodeposited CoWP layer between copper and silicon: Preparation and performance10.1016/j.surfin.2022.101925 ↗
5. Chen, Y.L., Yeh, K.H., Ou, T.Y., and Chang, L.C. (2022). Diffusion Barrier Characteristics of WSiN Films. Coatings, 12.10.3390/coatings12060811 ↗
6. Diffusion Barrier Prediction of Graphene and Boron Nitride for Copper Interconnects by Deep Learning10.1109/ACCESS.2020.3039257 ↗
7. Diffusion-controlled growth of Cu thin films electrodeposited directly on atomic-layer-deposited WC diffusion barrier for Cu interconnect10.1016/j.mee.2021.111613 ↗
8. Effects of amorphous Co-W and Ni-W barrier layers on the evolution of Sn/Cu interface10.1016/j.matchar.2021.111448 ↗
9. Electrodeposited Ni-W coatings as the effective reaction barrier at Ga-21.5In-10Sn/Cu interfaces10.1016/j.surfin.2022.101838 ↗
10. Excellent diffusion barrier property of amorphous NbMoTaW medium entropy alloy thin films used in Cu/Si Connect System10.1016/j.vacuum.2022.111195 ↗
11. Influence of additives on Cu thin films electrodeposited directly on Ti diffusion barrier in Cl-free electrolytes for Cu interconnect10.1016/j.mee.2017.02.006 ↗
12. Phase analysis of TaN/Ta barrier layers in sub-micrometer trench structures for Cu interconnects10.1016/j.apsusc.2005.01.104 ↗
13. Surface Morphology Control of Cu-Ag Alloy Thin Film on W Diffusion Barrier by Seedless Electrodeposition10.1166/jnn.2016.13577 ↗
14. Evaluation of the barrier capability of Zr-Si films with different substrate temperature for Cu metallization10.1016/j.apsusc.2008.08.082 ↗
15. TiN diffusion barrier for stable W/SiC(0001) interfaces in inert ambient at high temperature10.1016/j.tsf.2018.11.058 ↗
16. Zr-Ti-Ni thin film metallic glass as a diffusion barrier between copper and silicon10.1007/s10853-014-8770-6 ↗
17. Properties of reactively sputtered W-B-N thin film as a diffusion barrier for Cu metallization on Si10.1007/s00339-008-4961-9 ↗
18. Self-assembled subnanolayers as interfacial adhesion enhancers and diffusion barriers for integrated circuits10.1063/1.1591232 ↗
19. Electrical properties of sub-100 nm Cu films deposited by electroless plating on amino-terminated silicon oxide activated with Au nano-particles10.1016/j.surfcoat.2009.08.028 ↗
20. Alkoxysilane layers compatible with Cu deposition: Towards new diffusion barriers?10.1016/j.mee.2011.04.049 ↗
21. Effects of solvent on the formation of the MUA monolayer on Si and its diffusion barrier properties for Cu metallization10.1007/s13391-013-3339-0 ↗
22. Strengthening the Electromigration Resistance of Nanoscaled Copper Lines by (3-aminopropyl)trimethoxysilane Self-Assembled Monolayer10.1149/2162-8777/ac1d5e ↗
23. Effects of amino-terminated self-assembled monolayers on nucleation and growth of chemical vapor-deposited copper films10.1016/j.tsf.2008.07.030 ↗
24. Cheng, Y.L., Huang, C.W., Lee, C.Y., Chen, G.S., and Fang, J.S. (2019). Self-Assembled Monolayers on Highly Porous Low-k Dielectrics by 3-Aminopropyltrimethoxysilane Treatment. Coatings, 9.10.3390/coatings9040246 ↗
25. (3-Aminopropyl)trimethoxysilane Self-Assembled Monolayer as Barrier of Porous SiOCH for Electroless Cu Metallization: Optimizations of SiOCH Hydroxylation and Monolayer Functionalization10.1149/2162-8777/abe094 ↗
26. Barrier and seed repair performance of thin RuTa films for Cu interconnects10.1016/j.mee.2010.09.003 ↗
27. Screening self-assembled monolayers as Cu diffusion barriers10.1016/j.mee.2008.04.014 ↗
28. Diffusion barrier properties of carboxyl- and amine-terminated molecular nanolayers10.1063/1.1775035 ↗
29. Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology
30. Adhesion and debonding of multi-layer thin film structures10.1016/S0013-7944(98)00052-6 ↗
31. Coupled self-assembled monolayer for enhancement of Cu diffusion barrier and adhesion properties10.1039/C4RA08134J ↗
32. Aminosilanization nanoadhesive layer for nanoelectric circuits with porous ultralow dielectric film10.1021/am4009192 ↗
33. A Study of Ta-Si-N/Ti Bilayer Diffusion Barrier for Copper/Silicon Contact Systems10.1080/10426914.2015.1004711 ↗
34. Self-assembled molecular films of aminosilanes and their immobilization capacities10.1021/la0354638 ↗
35. Self-assembly of the 3-aminopropyltrimethoxysilane multilayers on Si and hysteretic current-voltage characteristics10.1007/s00339-007-4336-7 ↗
36. Influence of different solvents on the morphology of APTMS-modified silicon surfaces10.1016/j.apsusc.2014.05.157 ↗
37. Self-assembling of cyano- and carboxyl-terminated monolayers using short-chain alkylsiloxane10.1016/j.apsusc.2009.08.091 ↗
38. Study on chemical vapor deposited copper films on cyano and carboxylic self-assembled monolayer diffusion barriers10.1016/j.tsf.2010.02.016 ↗
39. MetalDielectric Interface Toughening by Catalyzed Ring Opening in a Monolayer10.1021/jz9001357 ↗
40. Study of crystal orientation in Cu film on TiN layered structures
41. Adjustment Cu3Si growth in the interface of annealed Cu-Zr alloy films/Si substrate to form inverted pyramid structure10.1016/j.matlet.2019.126536 ↗
42. Deposition and characterization of 3-aminopr-opyltrime-thoxysilane monolayer diffusion barrier for copper metallization10.1007/s11663-014-0239-0 ↗