journal article·2022-12-23Open access

Investigation on the Acoustical Transmission Path of Additively Printed Metals

Raphael Rehmet, Swenja Lorenz, Vincent Hahn, Armin Lohrengel

Applied Sciences· Volume 13· Issue 1

Abstract

When additive manufacturing is used, the freedom of design plays a decisive role. It allows designers of mechanically stressed parts to generate special functional surfaces, integrate very efficient conformal cooling channels, or adapt the parts to the specific load in order to increase the stress ratio. In combination with the functional principle of particle dampers, the usage of metal additive manufacturing could be useful to implement damping directly in the transmission path of machine parts and elements. To achieve this goal, it is necessary to qualify the influence on the damping capability of the particles, outer geometry, frequency behaviour and the shape of the inner geometry. In this approach, different inner geometries are used to analyse the distinctions of damping behaviour caused by unmelted metal powder. The focus lies on the geometrical shape of the inner geometry. It is recognisable that the shape has a non-negligible impact on the dynamic behaviour of the structure. The results show that structures with a high number of sharp edges in the inner shape oriented orthogonally to the excitation or under a certain angle provide a better energy decay than structures without an inner shape or a force-parallel oriented shape.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Mechanical Engineering, Clausthal University of Technology, 38678 Clausthal-Zellerfeld, Germany

Institute for Welding and Machining, Clausthal University of Technology, 38678 Clausthal-Zellerfeld, Germany

References (10)

Show source-provided references
1. Hollkamp, J.J., and Gordon, R.W. (1998). Experiments with particle damping. Smart Structures and Materials 1998: Passive Damping and Isolation, Proceedings of the 5th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 1–5 March 1998, SPIE.
2. Richard, H.A., Schramm, B., and Zipsner, T. (2017). Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Additive Fertigung von Bauteilen und Strukturen, Springer.10.1007/978-3-658-17780-5 ↗
3. Fowler, B.L., Flint, E.M., and Olson, S.E. (2001). Design Methodology for Particle Damping. Smart Structures and Materials 2001: Damping and Isolation, Proceedings of the SPIE’S 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4–8 March 2001, SPIE.
4. 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
5. Performance of Particle Dampers Under Random Excitation. ASME10.1115/1.2888343 ↗
6. Particle impact dampers: Past, present, and future10.1002/stc.2058 ↗
7. A review of particle damping modeling and testing10.1016/j.jsv.2019.114865 ↗
8. Particle damping for passive vibration suppression: Numerical modelling and experimental investigation10.1016/j.jsv.2003.11.023 ↗
9. A Study on the Dynamic Behaviour of Lightweight Gears
10. Verein Deutscher Ingenieure e.V. (2004). Damping of Materials and Members, Beuth Verlag GmbH. Classification and Survey, Blatt 1 VDI-3830.