journal article·2023-10-11Open access

Predicting Swell in Clay-Sand Mixtures Used in Liners

Muawia Dafalla

Applied Sciences· Volume 13· Issue 20

Abstract

A method to predict the swellability of clay-sand mixtures is proposed. This model is a modified form of the Studds (1997) prediction model for clay-sand mixtures. The new proposed model uses the laboratory fall cone penetration technique to produce a characterization chart. This chart presents slope levels that can be used to obtain an equation for the final clay void ratio versus the vertical effective stress for clays. The porosity of the clay-sand mixtures was worked out based on a correction factor obtained from compression and porosity measurements in the laboratory. The porosity of the mixture was merged into the clay profile equation to compute the final clay void ratio at a specified stress level, which made it possible to predict the swelling behavior for different and variable stress levels. The swellability slope was obtained using fall cone tests conducted on the fine portion. Mixtures of kaolinite and bentonite were introduced to represent soils with different swell potentials. The fall cone measurements of a few points can be used to establish the swellability relationships for natural clay. Merging fall cone points with the swellability slope chart can define the profile of the vertical effective stress versus the clay void ratio.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Soil and Unsaturated Flow · Geotechnical Engineering and Soil Mechanics · Landslides and related hazards

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Civil Engineering Department, King Saud University, Riyadh 11421, Saudi Arabia

Funding

Deanship of Scientific Research of King Saud University

References (28)

Show source-provided references
1. Zein, A.K.M. (1987, January 1–4). Comparison of Measured and Predicted Swelling Behavior of a Compacted Black Cotton Soil. Proceedings of the Sixth International Conference on Expansive Soils, New Delhi, India.
2. Chen, F.H. (1988). Foundations on Expansive Soils, Elsevier Scientific Publishing Company.
3. Dafalla, M.A., and Al-Sharmrani, M.A. (2008, January 10–12). Performance-Based Solutions For Foundations on Expansive Soils—Al Ghatt Region, Saudi Arabia. Proceedings of the International Conference on Geotechnical Engineering, Chiangmai, Thailand.
4. A constitutive model for partially saturated soils10.1680/geot.1990.40.3.405 ↗
5. Modelling the mechanical behaviour of expansive clays10.1016/S0013-7952(99)00079-4 ↗
6. A framework for the behaviour of unsaturated expansive clays10.1139/t92-120 ↗
7. Impact of microstructure on the hydraulic conductivity of undisturbed and artificially prepared smectitic clay10.1016/S0013-7952(99)00072-1 ↗
8. Mollins, L.H. (1996). The Design of Bentonite-Sand Mixtures. [Ph.D. Thesis, University of Leeds].
9. Predicting the properties of bentonite-sand mixtures10.1180/claymin.1996.031.2.10 ↗
10. The factors controlling the engineering properties of bentonite-enhanced sand10.1016/S0169-1317(03)00092-9 ↗
11. Studds, P.G. (1997). The Effect of Ionic Solutions on the Properties of Soil. [Ph.D. Thesis, University of Leeds].
12. Olphen, H.V. (1977). An Introduction to Clay Colloid Chemistry, for Clay Technologists, Geologists, and Soil Scientists, Interscience Publishers.
13. Methods of Test for Soils for Civil Engineering Purposes. Classification tests (Standard No. BS 1377-2:1990).
14. Fall-cone penetration and water content relationship of clays10.1680/geot.2000.50.2.181 ↗
15. Dafalla, M.A. (2004). The Use of the Fall Cone Penetrometer in the Characterization and Assessment of Swelling Clays. [Ph.D. Thesis, University of Leeds].
16. (1996). Standard Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils (Standard No. ASTM D4546-96).
17. Shear strength of very soft clay-sand mixtures10.1520/GTJ10069J ↗
18. Some Fall Cone Tests10.1680/geot.1985.35.1.64 ↗
19. The use of Cone Penetrometer to Determine the Plastic Limit of Soils
20. Fall cone and compression tests on clay-gravel mixtures10.1680/geot.1999.49.6.727 ↗
21. A study of the compaction properties of potential clay-sand buffer mixtures for use in nuclear fuel waste disposal10.1016/0013-7952(85)90015-8 ↗
22. Compacted sand-bentonite mixtures for hydraulic containment liners
23. Olmez, M.S. (2008). Shear Strength Behavior of Sand-Clay Mixtures. [Master’s Thesis, Middle East Technical University].
24. Gueddouda, M.K., Goual, I., Lamara, M., and Aboubaker, N. (2008, January 16–20). Hydraulic Conductivity and Shear Strength of Compacted Dune Sand-Bentonite Mixtures. Proceedings of the International Conference on Construction and Building Technology (ICCBT 2008), Kuala Lumpur, Malaysia.
25. The undrained behavior of clayed sands in triaxial compression and extension10.1680/geot.1991.41.3.383 ↗
26. Undrained behavior of compacted sand-clay mixtures under monotonic loading paths10.3923/jas.2008.3108.3118 ↗
27. Han, A. (2011). Geo-Frontiers 2011-ASCE, Geotechnical Special Publications (GSP) 211, ASCE Library.
28. The characteristic water content of fine grained soil-water system10.1680/geot.1998.48.3.337 ↗