Evaluating the Accuracy of the Reverse Engineering Process of Worn, Non-Standard Spur Gears—Pilot Studies
Source abstract
Abstract
For years, gears have been self-made by many industrial plants as substitutes (custom spare parts) for original parts from the manufacturer. This common practice uses a process called reverse engineering (RE). However, in the available scientific database, it is difficult to find articles about the accuracy of such a process. And while it is obvious that in order to obtain the most accurate quality of such a process, modern measurement techniques (coordinate, optical) should be used, most companies cannot afford to purchase such equipment. Reproducing gear geometry is difficult. But the issue of RE of non-standard gears seems to be even more difficult. This is why the authors undertook pilot studies to assess the accuracy of the RE process of worn, non-standard spur gears using conventional techniques and measuring instruments. Eight gears were tested, the module of which ranges from 1.020 to 4.98 mm. The key parameter was selected to estimate the accuracy of the process—the base pitch. The goal is to determine the value of the profile angle. Eleven models were proposed to estimate the nominal tolerance field, using various types of random data distribution. The tested gears were made in IT grade: 6, 7, 8, and 9 according to DIN 3961. Vernier disk micrometers were used for research. It has been shown that the nominal module does not have to be treated as a random variable in the population. Equation of identity was developed, allowing conversion of any gear with specific values of geometric parameters into an identical gear with alternative values of these parameters. The most effective estimating model was selected taking into account the symmetric Student–Fisher distribution with a confidence level of 60%. However, it is not possible to correctly reproduce the geometry of the gear wheel in that way. The following aspects should be taken into account: type and degree of mode of failure, number of load cycles, rotational speed, direction of rotation, material, type of thermochemical treatment, and torque. A simulation using FEM should be performed to determine the fatigue plastic deformations and diagnose their impact on the geometric dimensions of the gear wheel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Advanced machining processes and optimization · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Polytechnic Faculty, University of Kalisz, Poznańska 201-205, 62-800 Kalisz, Poland
Institute of Machine Design, Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, 60-965 Poznań, Poland
References (31)
Show source-provided references
1. Towards a more Comprehensive Understanding of Tolerance Engineering Research Importance10.1016/j.procir.2015.04.039 ↗
2. Issues related to the reconstruction of the geometry of the DP6 inch cylindrical gear in the context of reverse engineering using conventional techniques and measuring instruments10.1063/5.0172979 ↗
3. ISO Tolerance specification in reverse engineering10.1016/j.promfg.2017.09.063 ↗
4. (2010). Geometrical Product Specifications (GPS)—ISO Code System for Tolerances on Linear Sizes—Part 1: Basis of Tolerances, Deviations and Fits (Standard No. ISO 286-1:2010).
5. Telea, A.C. (2012). A Systematic Approach for Geometrical and Dimensional Tolerancing in Reverse Engineering. Reverse Engineering—Recent Advances and Applications, IntechOpen.10.5772/1850 ↗
6. Position tolerancing in reverse engineering: The fixed fastener case10.1243/09544054JEM703 ↗
7. Geometrical position tolerance assignment in reverse engineering, Int10.1080/09511920601164140 ↗
8. (1989). General Tolerances—Part 1: Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (Standard No. ISO 2768-1).
9. Hayhurst, D.R. (2000). A Knowledge-Based System for Tolerance Allocation in Reverse Engineering. Proceedings of the 33rd International MATADOR Conference, Springer.10.1007/978-1-4471-0777-4 ↗
10. Tolerance estimation and metrology for reverse engineering based remanufacturing systems10.1080/00207543.2021.1904158 ↗
11. Reconstructing original design: Process planning for reverse engineering10.1080/24725854.2022.2040761 ↗
12. (2009). Dimensioning and Tolerancing (Standard No. ASME Y14.5).
13. (2019). Dimensional and Geometrical Product Specifications and Verification (Standard No. ISO/TC 213).
14. Issues related to an attempt to recreate the geometry of a non-standard spur gear10.1088/1757-899X/1199/1/012105 ↗
15. (1998). Narzędzia Pomiarowe—Przyrządy Mikrometryczne—Wymagania (Standard No. PN-82/M-53200/A1).
16. (1999). Geometrical Product Specifications (GPS)—Micrometers—Part 1: Micrometers for External Measurements; Maximum Permissible Errors (Standard No. DIN 863-1:2017-02).
17. Mahr Group Brochure: Katalog Zbiorczy|Technika Pomiarów Produkcyjnych (Informal Translation: Collective Catalog|Production Measurement Techniques), Mahr Group. Printed in Germany.
18. (2024, January 19). Mahr Group Website. Available online: https://metrology.mahr.com/fileadmin/catalogs/OnlineCatalogs/Mahr-Metrology/index.php?catalog=Mahr-Metrology-PL&lang=pl.
19. Jezierski, J. (1994). Analiza Tolerancji i Niedokładności Pomiarów w Budowie Maszyn (Informal Translation: Analysis of Tolerances and Measurement Inaccuracies in Machine Construction), Wydawnictwa Naukowo-Techniczne WNT. [3rd ed.].
20. Equation of Identity for Two Spur Gears with Straight Teeth Having Two Different Alternative Sets of Geometric Parameters10.1063/5.0172980 ↗
21. Simulation of different geometric variants of spur gears in the context of their complete identity10.1063/5.0172981 ↗
22. Can non-standard involute gears of different modules mesh?10.1243/09544062JMES316FT ↗
23. Generating standard 20° involute pinions with increased fillet strength by using 25° rack cutters with non-standard module10.1243/09544062JMES350FT ↗
24. Stress analysis of the zero-backlash gear transmission10.1063/5.0173277 ↗
25. Ochęduszko, K. (2012). Koła Zębate t. 3 Sprawdzanie (Informal Translation: Gears, Volume 3—Checking), Wydawnictwa Naukowo-Techniczne WNT. [8th ed.]. EAN: 9788363623067.
26. (1953). Tolerances for Cylindrical Gear Teeth; Bases (Standard No. DIN 3961:1953-09).
27. (2024, January 19). DIN 3967 | Calculator (mechanicalcheck.com). Available online: https://www.mechanicalcheck.com/en/din3967/calc/.
28. Lynwander, P. (2024, May 26). Gear Tooth Scoring Design Considerations for Spur and Helical Gearing, Gear Technology, May/June 1985. pp. 7–13, 48. Available online: https://www.geartechnology.com/ext/resources/issues/0585x/Lynwander.pdf.
29. Faure, L. (2024, May 26). Classification of Types of Gear Tooth Wear—Part I, Gear Technology, November/December 1992. Available online: https://www.geartechnology.com/ext/resources/issues/1192x/faure.pdf?1633055058.
30. Faure, L. (2024, May 26). Classification of Types of Gear Tooth Wear—Part II, Gear Technology, November/December 1992. Available online: https://www.geartechnology.com/ext/resources/issues/0193x/faure.pdf?1633055062.
31. (2024, March 18). Broszura, Instytut Inżynierii Mechanicznej Wydziału Politechnicznego “-Pracownia Inżynierii Mechanicznej-” Uniwersytet Kaliski im. Prezydenta Stanisława Wojciechowskiego (University of Kalisz, Poland). Available online: https://uniwersytetkaliski.edu.pl/wp-content/uploads/2024/02/iim-12.02.2024.pdf.