journal article·2024-07-17Open access

Stress–Dilatancy Behavior of Alluvial Sands

Katarzyna Dołżyk-Szypcio, Zenon Szypcio, Tomasz Godlewski, Marcin Witowski

Applied Sciences· Volume 14· Issue 14

Abstract

Based on the Frictional State Concept (FSC), the stress–dilatancy behavior of alluvial sands in drained triaxial compression was investigated. The dilatant failure state is equivalent to the minimum plastic dilatancy state for sands. The dilatant failure state slightly precedes the failure state. The straight line approximating dilatant failure states in the stress ratio–plastic dilatancy plane defines the slope of the critical frictional state line in the q-p’ plane, i.e., the critical frictional state angle. The stress ratio–plastic dilatancy relationship, obtained from the FSC, defines the sand shear angle as a function of the critical frictional state angle and plastic dilatancy. The shear angle of the tested sand is a maximum of 2° greater than that obtained from Bolton’s formula. According to the authors, these differences are affected by the transverse anisotropy of sand in the tested samples and the difference between the dilatant failure state and the failure state.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Drilling and Well Engineering · Geotechnical Engineering and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Geotechnics, Roads and Geodesy, Faculty of Civil Engineering and Environmental Sciences, Bialystok University of Technology, 45A Wiejska Street, 15-351 Bialystok, Poland

Department of Building Structures, Geotechnics and Concrete, Building Research Institute, 21 Ksawerów Street, 02-656 Warsaw, Poland

Funding

Ministry of Science and Education, Poland · Building Research Institute

References (20)

Show source-provided references
1. Review of proposed stress-dilatancy relationships and plastic potential functions for uncemented and cemented sands10.30564/jgr.v1i2.864 ↗
2. Li, X., Zhu, H., and Yuan, Q. (2023). Dilatancy equation based on the property-dependent plastic potential theory for geomaterials. Fractal Fract., 7.10.3390/fractalfract7110824 ↗
3. Wood, D.M. (1990). Soil Behaviour and Critical State Soil Mechanics, Cambridge University Press. [1st ed.].10.1017/CBO9781139878272 ↗
4. Schofield, A.N., and Wroth, C.P. (1968). Critical State Soil Mechanics, Mc-Grow-Hill Book, Co.
5. Localised failure of geomaterials: How to extract localisation band behaviour from macro test data10.1680/jgeot.20.P.105 ↗
6. Visualization of non-uniform soil deformation during triaxial testing10.1007/s11440-021-01310-w ↗
7. Stress dilatancy and fabric dependencies on sand behaviour10.1061/(ASCE)0733-9399(2004)130:6(635) ↗
8. Strain localization in granular media10.1016/j.crhy.2015.01.001 ↗
9. Anisotropic failure criterion for soils based on equivalent stress tensor10.1016/j.sandf.2019.02.001 ↗
10. A failure criterion incorporating the effect of depositional angle for transversely isotropic soils10.1016/j.compgeo.2022.104812 ↗
11. Szypcio, Z. (2023, January 3–6). Stress-dilatancy behaviour of calcareous sand. Proceedings of the 8th International Symposium on Deformation Characteristic of Geomaterials (ISDCG2023), Porto, Portugal. Available online: https://www.issmge.org/publications/publication/stress-dilatancy-behaviour-of-calcareous-sands.10.1051/e3sconf/202454405004 ↗
12. Lambe, W.T., and Whitman, R.V. (1969). Soil Mechanics, John Wiley & Sons.
13. Head, K.H., and Epps, R.J. (2014). Manual of Soil Laboratory Testing. Vol. III Effective Stress Tests, Whittles Publishing. [3rd ed.].
14. The behaviour of a low- to medium-density chalk under a wide range of pressure conditions10.1016/j.sandf.2022.101268 ↗
15. Gabryś, K., Dołżyk-Szypcio, K., Szypcio, Z., and Sas, W. (2023). Stress-strain behavior of crushed concrete as a special anthropogenic soil. Materials, 16.10.3390/ma16237381 ↗
16. Elastic wave velocities in granular soils10.1061/JSFEAQ.0000493 ↗
17. Dołżyk-Szypcio, K. (2020). Stressv-dilatancy relationship of Erksak sand under drained triaxial compression. Geosciences, 10.10.3390/geosciences10090353 ↗
18. Parry, R.H.G., and Rosco, K.H. (1971, January 29–31). Shear strength parameters for undisturbed and remoulded soil specimens. Proceedings of the Roscoe Memorial Symposium on Stress-Strain Behaviour of Soils, Cambridge, UK.
19. Aysen, A. (2005). Soil Mechanics: Basic Concepts and Engineering Applications, Taylor & Francis Group.
20. The strength and dilatancy of sands10.1680/geot.1986.36.1.65 ↗