journal article·2024-08-20Open access

Experimentally Aided Operational Virtual Prototyping to Predict Best Clamping Conditions for Face Milling of Large-Size Structures

Krzysztof J. Kaliński, Marek A. Galewski, Michał R. Mazur, Natalia Stawicka-Morawska

Applied Sciences· Volume 14· Issue 16

Abstract

Vibrations occurring during milling operations are one of the main issues disturbing the pursuit of better efficiency of milling operations and product quality. Even in the case of a stable cutting process, vibration reduction is still an important goal. One of the possible solutions to obtain it is selection of the favorable conditions for clamping the workpiece to the machine table. In this paper, a method for predicting and selecting the clamping condition of a large-size workpiece for the reduction in vibrations during milling is presented. A modal test of the workpiece is performed first for a selected set of tightening screw settings. Next, one milling pass is performed to obtain reference data which are then used to tune the hybrid computational model. In the subsequent step, milling simulations are performed for a set of tightening variants, and the best one is selected, providing the lowest vibrations, assessed as the root mean square (RMS) of vibration displacements. In this paper, the description of the clamping selection procedure, key elements of the simulation model, and simulation and experimental results obtained for the milling of the test workpiece performed for a set of different clamping conditions are provided. The proposed method accurately predicts not only the best but also the worst clamping conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Manufacturing Process and Optimization · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering and Ship Technology, Gdansk University of Technology, 80-233 Gdansk, Poland

References (36)

Show source-provided references
1. State of the art in milling process of the flexible workpiece10.1007/s00170-020-05616-z ↗
2. Dynamic machining process planning incorporating in-process workpiece deformation data for large-size aircraft structural parts10.1080/0951192X.2018.1529431 ↗
3. The relationships between cutting parameters, tool wear, cutting force and vibration
4. Comprehensive effect of multi-parameters on vibration in high-speed precision milling10.1007/s00170-020-05441-4 ↗
5. Physics based models for characterization of machining performance—A critical review10.1016/j.cirpj.2024.04.008 ↗
6. Recent progress of chatter prediction, detection and suppression in milling10.1016/j.ymssp.2020.106840 ↗
7. Chatter detection methods in the machining processes: A review10.1016/j.jmapro.2022.03.018 ↗
8. Basit, A., Khan, N.B., Ali, S., Muhammad, R., Abduvalieva, D., Ijaz Khan, M.I., and Jameel, M. (2024). Chatter detection and suppression in machining processes: A comprehensive analysis. Int. J. Interact. Des. Manuf., 1–21.10.1007/s12008-023-01716-8 ↗
9. Chatter detection in milling processes—A review on signal processing and condition classification10.1007/s00170-023-10969-2 ↗
10. Machine tools for large parts10.1016/j.cirp.2013.05.009 ↗
11. Symmetry breaking in milling dynamics10.1016/j.ijmachtools.2019.01.002 ↗
12. Towards high milling accuracy of turbine blades: A review10.1016/j.ymssp.2021.108727 ↗
13. Preventing chatter vibrations in heavy-duty turning operations in large horizontal lathes10.1016/j.jsv.2014.12.002 ↗
14. A novel mode coupling mechanism for predicting low-frequency chatter in robotic milling by providing a vibration feedback perspective10.1016/j.ymssp.2024.111424 ↗
15. Machining fixture and deformation control of aero-engine thin-walled casing10.1007/s00170-023-12647-9 ↗
16. Modular intelligent fixture system for flexible clamping of large parts
17. Evolutionary Design of Machining Fixture Layout for Thin-Walled Structure10.1155/2022/5216966 ↗
18. Elastic mechanics-based fixturing scheme optimization of variable stiffness structure workpieces for surface quality improvement10.1016/j.precisioneng.2019.01.004 ↗
19. Optimization of a clamping concept based on machine learning10.1007/s11740-021-01073-z ↗
20. Fixture layout optimization for large thin-walled parts based on improved particle swarm optimization algorithm10.1007/s00170-024-13567-y ↗
21. Möhring, H.C., Wiederkehr, P., Gonzalo, O., and Kolar, P. (2018). Lecture Notes in Production Engineering: Intelligent Fixtures for the Manufacturing of Low Rigidity Components, Springer.10.1007/978-3-319-45291-3 ↗
22. A state-of-art review on chatter and geometric errors in thin-wall machining processes10.1016/j.jmapro.2021.05.055 ↗
23. A technique of experiment aided virtual prototyping to obtain the best spindle speed during face milling of large-size structures10.1007/s11012-020-01214-1 ↗
24. Locating damage to structures using incomplete measurements10.1007/s13349-016-0202-7 ↗
25. Jarosińska, M., and Berczyński, S. (2021). Changes in Frequency and Mode Shapes Due to Damage in Steel–Concrete Composite Beam. Materials, 14.10.3390/ma14216232 ↗
26. Multi-objective sensor placement optimization in SHM systems with Kriging-based mode shape interpolation10.1016/j.jsv.2023.118050 ↗
27. Müller, G., Rödel, L., and Krebs, J. (2023, January 18–21). Automated Fixture Planning in Milling Processes: A Systematic Literature Review. Proceedings of the 2023 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore.10.1109/IEEM58616.2023.10406419 ↗
28. Kaliński, K.J., Stawicka-Morawska, N., Galewski, M.A., and Mazur, M.R. (2021). A method of predicting the best conditions for large-size workpiece clamping to reduce vibration in the face milling process. Sci. Rep., 11.10.1038/s41598-021-00128-6 ↗
29. The clamping selection method to reduce the vibration of large-size workpieces during the face milling process
30. Kaliński, K.J., Galewski, M.A., Mazur, M.R., and Stawicka-Morawska, N. (2021). An Experimentally Aided Operational Virtual Prototyping to Obtain the Best Spindle Speed during Face Milling of Large-Size Structures. Materials, 14.10.3390/ma14216562 ↗
31. Kaliński, K.J. (2012). A Surveillance of Dynamic Processes in Mechanical Systems, The Publication of Gdansk University of Technology. (In Polish).
32. Dynamics and stability of micro-cutting operations10.1016/j.ijmecsci.2016.06.009 ↗
33. In–process detection and suppression of chatter in milling10.1016/0890-6955(92)90006-3 ↗
34. (2008). Continuously Hot Rolled Low Carbon Steel Sheet and Strip For Cold Forming. Technical Delivery Conditions (Standard No. 10111:2008).
35. Heylen, W., Lammens, S., and Sas, P. (2007). Modal Analysis Theory and Testing, KU Leuven.
36. Feld, M. (2000). Fundamentals of Designing Technological Processes of Typical Machine Parts, The Scientific and Technical Publication. (In Polish).