journal article·2024-09-03Open access

Modeling Polymer Microencapsulation Processes Using CFD and Population Balance Models

Masooma Qizilbash, Luis J. del Valle, Alfredo Guardo Zabaleta

Applied Sciences· Volume 14· Issue 17

Abstract

Computational fluid dynamics (CFD) modeling has emerged as a valuable tool for investigating complex processes like microencapsulation. This paper aims to validate the ability of CFD simulations to predict particle size distribution in a polymer microencapsulation process. The CFD modeling approach employed a Eulerian multiphase framework, incorporating a discrete population balance model to track the evolution of the droplet population. A realizable k-ε turbulence model and a multiple reference frame strategy were utilized to capture the system’s flow dynamics. The results reveal that while the CFD simulations align well with experimental data at higher agitation speeds (>10,000 rpm), discrepancies arise at lower speeds (<7500 rpm), indicating a challenge in accurately capturing turbulent viscous regimes. Despite these challenges, the CFD model demonstrates robust predictive capabilities for droplet formation and distribution in microencapsulation processes, validated by error margins within the acceptable limits. The validated model can be used as a reliable tool to guide experimental efforts and optimize process parameters, contributing to an enhanced understanding and control of microencapsulation processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Heat Transfer · Fluid Dynamics and Mixing · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chemical Engineering Department, Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya BarcelonaTECH, Campus Diagonal Besòs, Av. Eduard Maristany 16, 08019 Barcelona, Spain

Center for Research in Multiscale Science and Engineering (CCEM), Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya BarcelonaTECH, Campus Diagonal Besòs, Av. Eduard Maristany 16, 08019 Barcelona, Spain

Centre for Industrial Diagnostics and Fluid Dynamics (CDIF), Barcelona East School of Engineering (EEBE), Universitat Politècnica de Catalunya BarcelonaTECH, Campus Diagonal Besòs, Av. Eduard Maristany 16, 08019 Barcelona, Spain

References (64)

Show source-provided references
1. A Review: Microencapsulation
2. Microencapsulation: Methodologies and Applications
3. Core-Shell Micro/Nanocapsules: From Encapsulation to Applications10.1080/02652048.2023.2178538 ↗
4. Theoretical Model for Drop and Bubble Breakup in Turbulent Dispersions10.1002/aic.690420505 ↗
5. Application of a Hydrodynamic Model to Microencapsulation by Coacervation10.1080/02652040110055199 ↗
6. Vasisht, N. (2014). Applications of Mass and Heat Transfer in Microencapsulation Processes. Microencapsulation in the Food Industry: A Practical Implementation Guide, Academic Press.10.1016/B978-0-12-404568-2.00003-0 ↗
7. Micro and Nano Encapsulation, Retention and Controlled Release of Flavor and Aroma Compounds: A Critical Review10.1016/j.tifs.2019.02.030 ↗
8. Microencapsulation of Water-Soluble Herbicide by Interfacial Reaction. I. Characterization of Microencapsulation10.1002/1097-4628(20001128)78:9<1645::AID-APP100>3.0.CO;2-2 ↗
9. Ricardo, F., Pradilla, D., Luiz, R., and Alvarez Solano, O.A. (2021). A Multi-Scale Approach to Microencapsulation by Interfacial Polymerization. Polymers, 13.10.3390/polym13040644 ↗
10. Simulation Study of Droplet Formation in Inkjet Printing Using ANSYS FLUENT10.1088/1742-6596/2161/1/012026 ↗
11. Niamah, A.K., Gddoa Al-Sahlany, S.T., Ibrahim, S.A., Verma, D.K., Thakur, M., Singh, S., Patel, A.R., Aguilar, C.N., and Utama, G.L. (2021). Electro-Hydrodynamic Processing for Encapsulation of Probiotics: A Review on Recent Trends, Technological Development, Challenges and Future Prospect. Food Biosci., 44.10.1016/j.fbio.2021.101458 ↗
12. Alotaibi, H., Abeykoon, C., Soutis, C., and Jabbari, M. (2023). A Numerical Thermo-Chemo-Flow Analysis of Thermoset Resin Impregnation in LCM Processes. Polymers, 15.10.3390/polym15061572 ↗
13. Yuile, A., Schulz, A., Wiss, E., Müller, J., and Wiese, S. (2022). The Simulated Effect of Adding Solder Layers on Reactive Multilayer Films Used for Joining Processes. Appl. Sci., 12.10.3390/app12052397 ↗
14. Microencapsulation of Protein Drugs for Drug Delivery: Strategy, Preparation, and Applications10.1016/j.jconrel.2014.09.003 ↗
15. Microencapsulation-A Novel Approach in Drug Delivery: A Review
16. Recent Progress in Microencapsulation Technology and Its Applications in Petroleum Industry10.1016/j.molliq.2024.125162 ↗
17. Recent Developments in Microencapsulation of Food Ingredients10.1081/DRT-200063478 ↗
18. Calderón-Oliver, M., and Ponce-Alquicira, E. (2022). The Role of Microencapsulation in Food Application. Molecules, 27.10.3390/molecules27051499 ↗
19. Application of Microencapsulated Essential Oils in Cosmetic and Personal Healthcare Products—A Review10.1111/ics.12232 ↗
20. Microencapsulation of Essential Oils with Biodegradable Polymeric Carriers for Cosmetic Applications10.1016/j.cej.2014.02.024 ↗
21. Randolph, A.D., and Larson, M.A. (1971). Theory of Particulate Processes, Elsevier.
22. A Discretized Population Balance for Nucleation, Growth, and Aggregation10.1002/aic.690341108 ↗
23. Heath, A.R., and Koh, P.T.L. (2003, January 10–12). Combined Population Balance and CFD Modeling of Particle and Aggregation by Polymeric Flocculant. Proceedings of the Third International Conference on CFD in the Minerals and Porcess Industries, Melbourne, Australia.
24. Prediction of Emulsion Particle Sizes Using a Computational Fluid Dynamics Approach10.1016/S0927-7765(03)00051-1 ↗
25. Two-Phase Mass Transfer Coefficient Prediction in Stirred Vessel with a CFD Model10.1016/j.compchemeng.2007.10.010 ↗
26. Numerical Aspects and Implementation of Population Balance Equations Coupled with Turbulent Fluid Dynamics10.1016/j.compchemeng.2011.04.001 ↗
27. Bubble-Size Distributions and Flow Fields in Bubble Columns10.1002/aic.690481103 ↗
28. Modeling Fluid Behavior and Droplet Interactions during Liquid–Liquid Separation in Hydrocyclones10.1016/j.ces.2009.04.046 ↗
29. Development and Implementation of a Polydispersed Multiphase Flow Model in OpenFOAM10.1016/j.compchemeng.2011.04.011 ↗
30. Implementation and Analysis of Numerical Solution of the Population Balance Equation in CFD Packages10.1016/j.compchemeng.2008.03.007 ↗
31. Comparison of the Accuracy and Performance of Quadrature-Based Methods for Population Balance Problems with Simultaneous Breakage and Aggregation10.1016/j.compchemeng.2009.11.005 ↗
32. Effect of Dispersed Phase Viscosity on Maximum Droplet Generation Frequency in Microchannel Emulsification Using Asymmetric Straight-through Channels10.1007/s10404-010-0750-9 ↗
33. A Literature Review of Theoretical Models for Drop and Bubble Breakup in Turbulent Dispersions10.1016/j.ces.2009.04.026 ↗
34. Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes10.1002/aic.690010303 ↗
35. Modeling Droplet Breakage in Continuous Emulsification Using Static Mixers in the Framework of the Entire Spectrum of Turbulent Energy10.1021/acs.iecr.1c03529 ↗
36. Modeling the Breakup of Fluid Particles in Turbulent Flows10.1002/aic.10832 ↗
37. Hydrodynamic Modeling of Droplet Coalescence at Liquid-Liquid Interfaces10.1080/01496399208018870 ↗
38. The Liquid/Liquid Sedimentation Process: From Droplet Coalescence to Technologically Enhanced Water/Oil Emulsion Gravity Separators: A Review10.1080/01932690600767098 ↗
39. Drop Coalescence in Technical Liquid/Liquid Applications: A Review on Experimental Techniques and Modeling Approaches10.1515/revce-2015-0071 ↗
40. A Literature Review on Mechanisms and Models for the Coalescence Process of Fluid Particles10.1016/j.ces.2010.02.020 ↗
41. CFD Modeling of the Mixing of Water in Oil Emulsions10.1016/j.compchemeng.2012.06.013 ↗
42. Use of CFD in Modeling MMA Solution Polymerization in a CSTR10.1016/j.cej.2012.12.049 ↗
43. Roudsari, S.F. (2015). Experimental and CFD Investigation of the Mixing of MMA Emulsion Polymerization in a Stirred Tank Reactor. [Ph.D. Thesis, Toronto Metropolitan University].
44. Solnordal, C.B., Liovic, P., Delaney, G.W., Cummins, S.J., Schwarz, M.P., and Witt, P.J. (2015, January 7–9). Computaional and Experimental Study of Oil-Water Emulsion Flow and Stability in Stirred Tanks. Proceedings of the 11th International Conference on CFD in the Minerals and Process Industries, Melbourne, Australia.
45. High Shear Mixers: A Review of Typical Applications and Studies on Power Draw, Flow Pattern, Energy Dissipation and Transfer Properties10.1016/j.cep.2012.04.004 ↗
46. CFD-Based Modeling of Precipitation by Supercritical Anti-Solvent Process of Microparticles from Grape Pomace Extract with Population Balance Approach10.1016/j.supflu.2017.10.027 ↗
47. Kinetic Modeling of Nanoprecipitation Using CFD Coupled with a Population Balance10.1021/ie100558n ↗
48. Effect of Different Good Solvents in Flash Nano-Precipitation via Multi-Scale Population Balance Modeling-CFD Coupling Approach10.1016/j.ces.2021.116833 ↗
49. Scale-up of Continuous Microcapsule Production10.1016/j.cep.2020.107989 ↗
50. IKA-Werke GmbH & Co. (2024, July 18). S 18N-19G Dispersing Tool. Available online: https://www.ika.com/en/Products-LabEq/Dispersers-pg177/S-18-N-19-G-Dispersing-tool-L004640/.
51. Morphology and Release Profile of Microcapsules Encapsulating Peppermint Oil by Complex Coacervation10.1016/j.jfoodeng.2011.01.011 ↗
52. Microencapsulation of Ginger Oil by Complex Coacervation Using Atomization: Effects of Polymer Ratio and Wall Material Concentration10.1016/j.jfoodeng.2020.110214 ↗
53. Microencapsulation and Controlled Release of α-Tocopherol by Complex Coacervation between Pea Protein and Tragacanth Gum: A Comparative Study with Arabic and Tara Gums10.1016/j.ifset.2022.102951 ↗
54. Marshall Scientific (2024, August 06). Sorvall RC5B Plus Refrigerated Centrifuge. Available online: https://www.marshallscientific.com/Sorvall-RC5B-Plus-Refrigerated-Centrifuge-p/so-rc5b.htm.
55. Protection of Fish Oil from Oxidation by Microencapsulation Using Freeze-Drying Techniques10.1002/(SICI)1438-9312(200002)102:2<114::AID-EJLT114>3.0.CO;2-0 ↗
56. Telstar (2024, July 18). LyoQuest Basic Research Freeze Dryer. Available online: https://www.telstar.com/en/laboratory-equipment/laboratory-freeze-dryers/basic-research-benchtop-freeze-dryer/.
57. Center for Research in Multiscale Science and Engineering, and Universitat Politècnica de Catalunya (2024, August 06). Focused Ion Beam. Available online: https://multiscale.upc.edu/en/infrastructure/focused-ion-beam.
58. Brookhaven Instruments (2024, August 06). NanoBrook 90Plus Zeta Brochure PDF. Available online: https://www.brookhaveninstruments.com/wp-content/uploads/2024/08/Brookhaven-NanoBrook-90Plus-Zeta.pdf.
59. Parra Mondejar, A. (2016). Simulació Fluidodinàmica (CFD) de Formació de Nanoparticules a Escala Industrial. [Bachelor’s Thesis, Universitat Politècnica de Catalunya].
60. Ansys Inc (2024, August 06). Ansys Fluent. Available online: https://www.ansys.com/products/fluids/ansys-fluent.
61. Emulsification in Turbulent Flow: 1. Mean and Maximum Drop Diameters in Inertial and Viscous Regimes10.1016/j.jcis.2007.03.059 ↗
62. Nanoemulsion Formation by Phase Inversion Emulsification: On the Nature of Inversion10.1021/la060043e ↗
63. Measurement and Calibration of Droplet Size Distributions in Water-in-Oil Emulsions by Particle Video Microscope and a Focused Beam Reflectance Method10.1021/ie901228e ↗
64. Influence of the Turbulence Model in CFD Modeling of Wall-to-Fluid Heat Transfer in Packed Beds10.1016/j.ces.2004.10.034 ↗