journal article·2024-10-10Open access

The Effect of Silane Treatment of a Resin-Based Composite on Its Microtensile Bond Strength to a Ceramic Restorative Material

Akiko Haruyama, Takashi Muramatsu, Atsushi Kameyama

Applied Sciences· Volume 14· Issue 20

Abstract

The purpose of this study was to investigate the effect of silane treatment of a resin-coated resin-based composite (RBC) base material on its microtensile bond strength (μTBS) to a computer aided-design/computer-aided manufacturing (CAD/CAM) ceramic restorative material. RBC blocks (4 mm × 7 mm × 10 mm) were prepared, and the adherend surfaces were prepared as follows: no resin coating + no silane treatment (Group I), no resin coating + silane treatment (Group II), resin coating only (Group III), and resin coating + silane treatment (Group IV). The resin coating was applied with Clearfil SE Bond and flowable RBC to the adherend surface. Each treated sample was bonded to a ceramic block using Panavia V5. After storage in 37 °C water for 1 week, microspecimens were fabricated, and the μTBS was tested. The failure mode of each specimen was determined using stereomicroscopy and scanning electron microscopy. The µTBS of Group II (20.2 ± 4.0 MPa) was not significantly different from that of Group I (17.6 ± 5.9 MPa) (p > 0.05), and the µTBS of Group I was significantly smaller than that of Group III (21.3 ± 7.2 MPa) (p < 0.05). The µTBS of Group IV (24.9 ± 3.8 MPa) was significantly greater than that of Group III (p < 0.05). Our findings indicate that silane treatment of the resin-coated surface can enhance the µTBS. Silane treatment of RBC base material was not effective when prepared without resin coating.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Operative Dentistry, Cariology, and Pulp Biology, Tokyo Dental College, Chiyoda-ku, Tokyo 101-0061, Japan

Department of Cariology, Endodontology and Periodontology, School of Dentistry, Matsumoto Dental University, Shiojiri 399-0781, Japan

References (31)

Show source-provided references
1. Morphological and mechanical characterization of the acid-base resistant zone at the adhesive-dentin interface of intact and caries-affected dentin10.2341/05-62 ↗
2. The microtensile bond strength test: Its historical background and application to bond testing10.1016/j.jdsr.2019.10.001 ↗
3. Minimally invasive lithium disilicate ceramic veneers fabricated using chairside CAD/CAM: A clinical report10.1016/S0022-3913(12)00012-1 ↗
4. Three-year clinical evaluation of CAD/CAM restorations10.1111/j.1708-8240.1992.tb00690.x ↗
5. Effect of bulk-fill base material on fracture strength of root-filled teeth restored with laminate resin composite restorations10.1016/j.jdent.2017.05.016 ↗
6. Nakamura, K., Horasawa, N., Okuse, T., Uchikawa, R., Shimada, K., Kuroiwa, A., Murakami, S., Hasegawa, H., and Kameyama, A. (2023). Physico-Mechanical Properties of a Newly Developed Base Material Containing Mineral Trioxide Aggregate. Coatings, 13.10.3390/coatings13030597 ↗
7. Concept and clinical application of the resin-coating technique for indirect restorations10.4012/dmj.2017-253 ↗
8. Sealing ability of dentin coating using adhesive resin systems
9. Change of dentin permeability in different storage media after resin coating10.47416/apjod.15-217 ↗
10. Tensile bond strengths of resin cements to bovine dentin using resin coating
11. Nanoleakage in indirect composite restorations using different combinations of resin coating technique10.1186/2196-4351-2-5 ↗
12. Microtensile bond strengths to cavity floor dentin in indirect composite restorations using resin coating10.1111/j.1708-8240.2006.00062.x ↗
13. Microtensile bond strength of indirect resin composite to resin-coated dentin: Interaction between diamond bur roughness and coating material10.2209/tdcpublication.50.13 ↗
14. Raszewski, Z., Brząkalski, D., Derpeński, Ł., Jałbrzykowski, M., and Przekop, R.E. (2022). Aspects and Principles of Material Connections in Restorative Dentistry-A Comprehensive Review. Materials, 15.10.3390/ma15207131 ↗
15. Silane adhesion mechanism in dental applications and surface treatments: A review10.1016/j.dental.2017.09.002 ↗
16. Influence of surface treatment on adhesive properties between bulk-fill base material and CAD/CAM ceramic material cemented with 4-META/MMA-TBB resin
17. Effect of emitted wavelength and light guide type on irradiance discrepancies in hand-held dental curing radiometers10.1155/2013/647941 ↗
18. Protection and reinforcement of tooth structures by dental coating materials10.3390/coatings2040210 ↗
19. Challenging the Concept that OptiBond FL and Clearfil SE Bond in NCCLs Are Gold Standard Adhesives: A Systematic Review and Meta-analysis10.2341/20-059-LIT ↗
20. Microtensile Bond Strength and Micromorphology of Bur-cut Enamel Using Five Adhesive Systems
21. Bonding effectiveness of self-etch adhesives to dentin after 24 h water storage10.4103/JCD.JCD_257_17 ↗
22. Influence of solvent evaporation on ultimate tensile strength of contemporary dental adhesives10.1186/s40563-019-0120-0 ↗
23. Significance of immediate dentin sealing and flowable resin coating reinforcement for unfilled/lightly filled adhesive systems10.1111/jerd.12700 ↗
24. Thin resin coating by dual-application of all-in-one adhesives improves dentin bond strength of resin cements for indirect restorations10.4012/dmj.2009-110 ↗
25. Effectiveness and stability of silane coupling agent incorporated in ‘universal’ adhesives10.1016/j.dental.2016.07.002 ↗
26. Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions10.1016/j.dental.2006.11.007 ↗
27. Phosphate group adsorption capacity of inorganic elements affects bond strength between CAD/CAM composite block and luting agent10.4012/dmj.2020-029 ↗
28. Silanising agents promote resin-composite repair10.1111/idj.12188 ↗
29. Bonding performance of universal adhesives on composite repairs, with or without silane application10.4103/JCD.JCD_11_18 ↗
30. Luting of CAD/CAM ceramic inlay: Direct composite versus dual-cured luting composite10.3233/BME-151274 ↗
31. Wu, C.-Y., Nakamura, K., Miyashita-Kobayashi, A., Haruyama, A., Yokoi, Y., Kuroiwa, A., Yoshinari, N., and Kameyama, A. (2024). The effect of additional silane pre-treatment on the microtensile bond strength of resin-based composite post-and-core build-up material. Appl. Sci., 14.10.3390/app14156637 ↗