Multi-Platform Point Cloud Registration Method Based on the Coarse-To-Fine Strategy for an Underground Mine
Source abstract
Abstract
Spatially referenced and geometrically accurate laser scanning is essential for the safety monitoring of an underground mine. However, the spatial inconsistency of point clouds collected by heterogeneous platforms presents challenges in achieving seamless fusion. In our study, the terrestrial and handheld laser scanning (TLS and HLS) point cloud registration method based on the coarse-to-fine strategy is proposed. Firstly, the point features (e.g., target spheres) are extracted from TLS and HLS point clouds to provide the coarse transform parameters. Then, the fine registration algorithm based on identical area extraction and improved 3D normal distribution transform (3D-NDT) is adopted, which achieves the datum unification of the TLS and HLS point cloud. Finally, the roughness is calculated to downsample the fusion point cloud. The proposed method has been successfully tested on two cases (simulated and real coal mine point cloud). Experimental results showed that the registration accuracy of the TLS and HLS point cloud is 4.3 cm for the simulated mine, which demonstrates the method can capture accurate and complete spatial information about underground mines.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Remote Sensing and LiDAR Applications · 3D Surveying and Cultural Heritage · Robotics and Sensor-Based Localization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Surveying and Geo-Informatics, Shandong Jianzhu University, Jinan 250101, China
College of Geodesy and Geomatics, Shandong University of Science and Technology, Qingdao 266590, China
Funding
National Natural Science Foundation of China · Shandong Provincial Natural Science Foundation
References (39)
Show source-provided references
1. Investigation on jet grouting support strategy for controlling time-dependent deformation in the roadway10.1002/ese3.654 ↗
2. Novel high-performance automatic removal method of interference points for point cloud data in coal mine roadway environment10.1080/01431161.2023.2184215 ↗
3. An MLS-based high-accuracy measurement and automatic analysis method for roadway deformation10.1016/j.tust.2023.105306 ↗
4. Real-time measuring and warning of surrounding rock dynamic deformation and failure in deep roadway based on machine vision method10.1016/j.measurement.2019.107028 ↗
5. Singh, S.K., Banerjee, B.P., and Raval, S. (2021). Three dimensional unique identifier based automated georeferencing and coregistration of point clouds in underground environment. Remote Sens., 13.10.3390/rs13163145 ↗
6. Analyzing point cloud of coal mining process in much dust environment based on dynamic graph convolution neural network10.1007/s11356-022-22490-2 ↗
7. Sonar digital twin layer via multiattention networks with feature transfer10.1109/TGRS.2024.3408411 ↗
8. A robust approach to identify roof bolts in 3D point cloud data captured from a mobile laser scanner10.1016/j.ijmst.2021.01.001 ↗
9. A quality improvement method for 3d laser slam point clouds based on geometric primitives of the scan scene10.1080/2150704X.2020.1811911 ↗
10. Baek, J., Park, J., Cho, S., and Lee, C. (2022). 3D global localization in the underground mine environment using mobile LiDAR mapping and point cloud registration. Sensors, 22.10.3390/s22082873 ↗
11. Kang, J., Li, M., Mao, S., Fan, Y., Wu, Z., and Li, B. (2024). A coal mine tunnel deformation detection method using point cloud data. Sensors, 24.10.3390/s24072299 ↗
12. Autonomous exploration and mapping of abandoned mines10.1109/MRA.2004.1371614 ↗
13. Efficient large-scale three-dimensional mobile mapping for underground mines10.1002/rob.21504 ↗
14. Zhang, H., Mao, S., and Li, M. (2024). A coal mine excavation tunnels modeling method based on point clouds. Appl. Sci., 14.10.3390/app14209454 ↗
15. Underground oil shale mine surveying using handheld mobile laser scanners10.3176/oil.2021.1.03 ↗
16. A method for deformation detection and reconstruction of shield tunnel based on point cloud10.1061/JCEMD4.COENG-14225 ↗
17. Joint structure detection and multi-scale clustering filtering for tunnel lining extraction from point clouds10.1109/TITS.2024.3373387 ↗
18. Automated bridge component recognition from point clouds using deep learning10.1002/stc.2591 ↗
19. Automatically extracting surfaces of reinforced concrete bridges from terrestrial laser scanning point clouds10.1016/j.autcon.2021.104127 ↗
20. Li, Y., Liu, P., Li, H., and Huang, F. (2021). A comparison method for 3d laser point clouds in displacement change detection for arch dams. ISPRS Int. J. Geo-Inf., 10.10.3390/ijgi10030184 ↗
21. 3D cavity detection technique and its application based on cavity auto scanning laser system10.1007/s11771-008-0053-4 ↗
22. Cavity 3D modeling and correlative techniques based on cavity monitoring10.1007/s11771-008-0119-3 ↗
23. Terrestrial laser scanning monitoring and spatial analysis of ground disaster in Gaoyang coal mine in Shanxi, China: A technical note10.1007/s12665-017-6609-6 ↗
24. A machine learning approach for the detection of supporting rock bolts from laser scan data in an underground mine10.1016/j.tust.2020.103656 ↗
25. Determination of underground mining-induced displacement field using multi-temporal TLS point cloud registration10.1016/j.measurement.2021.109482 ↗
26. An automated method to register airborne and terrestrial laser scanning point clouds10.1016/j.isprsjprs.2015.08.006 ↗
27. Automated registration of dense terrestrial laser-scanning point clouds using curves10.1016/j.isprsjprs.2014.05.012 ↗
28. Tai, H., Xia, Y., He, X., Wu, X., Li, C., Yan, M., Kong, X.L., and Yang, M.L. (2022). RGB-D camera for 3d laser point cloud hole repair in mine access shaft roadway. Appl. Sci., 12.10.3390/app12178910 ↗
29. Pu, X., Gan, S., Yuan, X., and Li, R. (2022). Feature analysis of scanning point cloud of structure and research on hole repair technology considering space-ground multi-source 3d data acquisition. Sensors, 22.10.3390/s22249627 ↗
30. Pairwise registration of TLS point clouds by deep multi-scale local features10.1016/j.neucom.2019.12.074 ↗
31. Inlier extraction for point cloud registration via supervoxel guidance and game theory optimization10.1016/j.isprsjprs.2020.01.021 ↗
32. Automatic registration of terrestrial and airborne point clouds using building outline features10.1109/JSTARS.2017.2788054 ↗
33. A symmetry-based method for LiDAR point registration10.1109/JSTARS.2017.2752765 ↗
34. Surface-based matching of 3D point clouds with variable coordinates in source and target system10.1016/j.isprsjprs.2015.11.001 ↗
35. Rock surface classification in a mine drift using multiscale geometric features10.1109/LGRS.2015.2398814 ↗
36. Yan, L., Tan, J., and Liu, H. (2017). Automatic registration of TLS-TLS and TLS-MLS point clouds using a genetic algorithm. Sensors, 17.10.3390/s17091979 ↗
37. Scan registration for autonomous mining vehicles using 3D-NDT10.1002/rob.20204 ↗
38. An Automatic coordinate unification method of multitemporal point clouds based on virtual reference datum detection10.1109/JSTARS.2020.3008492 ↗
39. MI-NDT: Multiscale iterative normal distribution transform for registering large-scale outdoor scans10.1109/TGRS.2024.3437162 ↗