journal article·2025-03-04Open access

Hydrodynamic and Morphological Effects of Non-Powered Floating Objects on Sediment Resuspension: A CFD and Regression Analysis

Nuray Gedik, Onur Bora, Mehmet Sedat Kabdaşlı, Emel İrtem

Applied Sciences· Volume 15· Issue 5

Abstract

This study investigates the hydrodynamic and morphological effects caused by non-powered floating objects (e.g., barges, pontoons, and floating or moored platforms) that are towed by external forces (such as tugboats) across flat, shallow seabeds. This study employs an integrated approach combining advanced computational fluid dynamics (CFD) simulations with multivariate polynomial regression analysis to systematically investigate the hydrodynamic and morphological effects of non-powered floating objects on sediment resuspension. A total of 96 simulation scenarios were conducted, of which 84 significant cases (where the floating object did not touch the seabed) were analyzed. Variations included bow geometries (blunt and raked), towing speeds, and operational parameters. The results indicate that, under similar towing speeds and clearance heights, blunt bows increase the suspended sediment concentration by approximately 90–190% compared to raked bows. The regression model, attaining an R-squared value of 0.9647, identified the Froude number, squat ratio, squared towing time, and object type as critical predictors of suspended sediment concentration. Furthermore, the interaction terms between the Froude number and object type were significant, enhancing the model’s predictive accuracy. These results underscore the importance of optimized design and operational strategies in minimizing the environmental impact of floating structures, especially in shallow marine environments where sediment dynamics play a crucial role in ecological balance. Careful consideration of towing speed, object geometry, and operational parameters can significantly reduce sediment resuspension, mitigating ecological consequences.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Oil Spill Detection and Mitigation · Coastal and Marine Dynamics · Marine and Offshore Engineering Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Balikesir University, Balikesir 10145, Türkiye

Department of Science Affairs, Balikesir Metropolitan Municipality, Balikesir 10185, Türkiye

Formerly at the Faculty of Civil Engineering, Istanbul Technical University, Istanbul 34672, Türkiye

Department of Civil Engineering, Doğuş University, Istanbul 34775, Türkiye

Funding

Balikesir University Research

References (21)

Show source-provided references
1. Ravens, T.M. (1997). Sediment Resuspension in Boston Harbor. [Ph.D. Thesis, Massachusetts Institute of Technology].
2. Maynord, S.T. (2000). Physical Forces Near Commercial Tows, U.S. Army Corps of Engineers. Environmental Report 19.
3. Desktop method for estimating vessel-induced sediment suspension10.1061/(ASCE)0733-9429(2001)127:7(577) ↗
4. Estimating boat-wake-induced levee erosion using sediment suspension measurements10.1061/(ASCE)0733-950X(2002)128:4(152) ↗
5. Boat wakes as a cause of riverbank erosion: A case study from the Waikato River, New Zealand
6. Sediment resuspension by vessel-generated waves along the Savannah River, Georgia10.1061/(ASCE)WW.1943-5460.0000088 ↗
7. Effects of boating activities on aquatic vegetation in the Stockholm archipelago, Baltic Sea10.1016/j.ecss.2004.05.009 ↗
8. Characteristics of ships’ depression waves and associated sediment resuspension in Venice Lagoon, Italy10.1016/j.jmarsys.2010.11.005 ↗
9. Zaggia, L., Lorenzetti, G., Manfé, G., Scarpa, G.M., Molinaroli, E., Parnell, K.E., Rapaglia, J.P., Gionta, M., and Soomere, T. (2017). Fast shoreline erosion induced by ship wakes in a coastal lagoon: Field evidence and remote sensing analysis. PLoS ONE, 12.10.1371/journal.pone.0187210 ↗
10. Bank erosion processes in regulated navigable rivers
11. Mao, L., and Chen, Y. (2020). Investigation of ship-induced hydrodynamics and sediment suspension in a heavy shipping traffic waterway. J. Mar. Sci. Eng., 8.10.3390/jmse8060424 ↗
12. 3D numerical modeling of sediment resuspension induced by the compounding effects of ship-generated waves and the ship propeller10.1061/(ASCE)EM.1943-7889.0000739 ↗
13. 3D modeling of sediment movement by ships-generated wakes in confined shipping channel10.1016/S1001-6279(14)60021-4 ↗
14. Ship-induced sediment suspension in the Changjiang Estuary
15. Robijns, T. (2014). Flow Beneath Inland Navigation Vessels. [Master’s Thesis, Delft University of Technology].
16. Schroevers, M., Berends, K.D., Vermaas, T., and Verheij, H.J. (2015, January 2–6). Measuring ship-induced currents in a canal. Proceedings of the 2015 IEEE/OES 11th Current, Waves and Turbulence Measurement (CWTM), St. Petersburg, FL, USA.10.1109/CWTM.2015.7098126 ↗
17. (FLOW-3D® HYDRO Version 1.0 Users Manual. FLOW-3D [Computer Software], 2020). FLOW-3D® HYDRO Version 1.0 Users Manual. FLOW-3D [Computer Software].
18. The renormalization group, the ɛ-expansion and derivation of turbulence models10.1007/BF01060210 ↗
19. Soulsby, R. (1997). Chapter 9: Bedload transport. Dynamics of Marine Sand, Thomas Telford Publications.
20. Sediment transport, Part I: Bed load transport10.1061/(ASCE)0733-9429(1984)110:10(1431) ↗
21. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗