journal article·2025-03-29Open access

Research on Springback Compensation Method of Roll Forming Based on Improved Fuzzy PID Control

Tengqiang Wang, Yingping Qian, Wengkang Fang, Dongqiao Zhang, Huanqi Weng, Yiran Jiang

Applied Sciences· Volume 15· Issue 7

Abstract

To enhance the forming accuracy of circular rolling, this paper proposes a control strategy for compensating the springback of sheet metals by altering the rolling angle. A kinematic model for circular rolling springback compensation is established to monitor the forming radian of the sheet metal in real time. The motor is then controlled to adjust the rolling angle of the sheet metal through a mechanical structure, thereby achieving springback compensation. To realize the precise control required by the springback compensation control strategy, a fuzzy PID controller strategy optimized by the coupled whale particle (CWP) algorithm is designed. The research results indicate that the error between the formed radius and the desired radius in a normal circular rolling experiment is 5.4%, 5.32%, and 5.52%. However, after applying the springback compensation strategy, the error in the circular rolling experiment is reduced to 1.6%, 1.55%, and 1.72%. This demonstrates that the proposed springback compensation strategy for circular rolling effectively improves the accuracy of circular rolling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China

Funding

Technical Innovation Project of Hubei Province · Major Projects of Hubei Provincial Science and Technology Department · Hubei Provincial Department of Education Science and Technology Research Program Young Talents Project

References (27)

Show source-provided references
1. A robust optimization design method for sheet metal roll forming and its application in roll forming circular cross-section pipe10.1007/s00170-019-03773-4 ↗
2. Effects of rapid heating and uniaxial loading on the phase transformation and mechanical properties of direct partial remelted butt joint of AISI D2 tool steel10.1016/j.msea.2020.140250 ↗
3. Tsai, S., and Chang, J. (2021). Regression Approach to a Novel Lateral Flatness Leveling System for Smart Manufacturing. Appl. Sci., 11.10.3390/app11146645 ↗
4. Curiel, D., Veiga, F., Suarez, A., and Villanueva, P. (2023). Advances in Robotic Welding for Metallic Materials: Application of Inspection, Modeling, Monitoring and Automation Techniques. Metals, 13.10.3390/met13040711 ↗
5. Prediction on V-shaped free bending angle and springback based on DPSO-BP neural network
6. Rounding precision research on horizontal up-adjustable three-roll plate bending machine considering springback
7. Construction of Springback Curve Equation and Process Optimization of Welded Pipe during Cold Bending
8. Theoretical analysis and experimental investigations on the symmetrical three-roller setting round process10.1007/s00170-016-9610-4 ↗
9. Three-roller continuous and synchronous adjusting straightness and roundness process for LSAW pipes
10. Mechanics Property Prediction of Cold Rolled High Strength Steel Coils Based on GBDT
11. A novel approach to springback control of high-strength steel in cold roll forming10.1007/s00170-020-05154-8 ↗
12. Optimization of roll forming process parameters—A semi-empirical approach10.1007/s00170-009-2252-z ↗
13. Zhen, C., Guo, R., and Guo, Y. (2015). Analysis and Calculation of Top Roller′s Deflection of Symmetric Three-roll Bending Machine. Mech. Res. Appl., 52–54.
14. Experimental analysis of an asymmetrical three-roll bending process10.1007/s00170-015-7678-x ↗
15. Gavrilescu, I., Boazu, D., and Stan, F. (2021). Estimating of Bending Force and Curvature of the Bending Plate in a Three-Roller Bending System Using Finite Element Simulation and Analytical Modeling. Materials, 14.10.3390/ma14051204 ↗
16. Springback prediction of DP980 steel considering nonlinear elastic modulus in cold roll forming
17. Xing, M., Liu, J., Wang, Y., Wang, Z., Fu, Y., and Du, F. (2023). Prediction and Optimization of Wear Depth on Rectangular Tube Surface in Roll Forming. Metals, 13.10.3390/met13010068 ↗
18. Springback control of laser-assisted double-sided robotic roller forming based on response surface method
19. Study on Offset Mechanism and Adaptive Fuzzy Control Method for Radial-axial Ring Rolling Processes of Super Large Rings
20. Towards Extremely Large-scale Radial-axial Ring Rolling for Constant Ring Growth State with Accurate Closed-loop Control Method10.3901/JME.2023.10.085 ↗
21. Fuzzy Self-adaptive PID Controller in Profile Bending Machine with the Application of Feed Mechanism
22. Research and improvement of roll position automatic adjustment control system for cold-formed steel unit
23. Yao, Z. (2020). Round radius calculation of three-roll plate bending machine. Constr. Mach. Dig., 9–10. Available online: https://kns.cnki.net/kcms2/article/abstract?v=KlmjsyJjhUQ0T7Nnvlz9m-_wkSAHonIXl2oIk-8EIvXBQhhPMEsGMmrgV2zeU1-ZQSUAwpMy9-Ty4rQDhZzfsX6zL7VJ_g2FCmRT9f7r4ju85RycZamZNXhsnhGA4P1Oe2s2lqeXJB67HcOgqOxtZcmWHnlDt7-9N-guzaOByCeYDx9KZgIRkhXWHN1nyN-Z&uniplatform=NZKPT&language=CHS.
24. Zhang, B., and Lin, J. (2021). Control Model of Three Roll Plate Bending Machine with Horizontal Adjustment. Shandong Ind. Technol., 3–8.
25. Optimizing connection weights in neural networks using the whale optimization algorithm10.1007/s00500-016-2442-1 ↗
26. Convergence analysis of standard particle swarm optimization algorithm and its improvement10.1007/s00500-017-2615-6 ↗
27. Particle swarm optimization algorithm: An overview10.1007/s00500-016-2474-6 ↗