Investigation of Hybrid Tooth Profiles for Robotic Drives Based on IH Tooth Profiles and Cycloidal Curves
Source abstract
Abstract
Recently, with policies aimed at strengthening domestic manufacturing and technological innovation, the robotics industry has been growing rapidly, and its applications are expanding across various industrial fields. Accordingly, the importance of high-performance speed reducers with flexibility and precision is gradually increasing. The tooth profiles used in conventional harmonic reducers have structural limitations, such as meshing discontinuity, restrictions on the radius of curvature of the tooth base, and distortion of the contact trajectory, especially when the number of teeth is small. These problems limit the design freedom of the reducer and make it difficult to secure contact stability and durability under precision driving conditions. To solve these problems, this paper proposes a new tooth profile design equation, the IH (Involute Harmonic) tooth profiles and the HTPs (Hybrid Tooth Profiles), using the cycloid curve to overcome the structural limitations of the conventional harmonic tooth profile, which is difficult to design under small-tooth-number conditions, and to enable tooth design without restrictions on the number of teeth. HTP tooth profile is a new gear tooth profile design method that utilizes IH tooth profile and cycloid curve to optimize the meshing characteristics of gears. A tooth profile design tool based on the HTP equation was developed using Python 3.13.3. The tool’s effectiveness was validated through simulations assessing tooth meshing and interference. Using the tool, an R21_z3 reducer with a single-stage high reduction ratio was designed to evaluate practical applicability. A prototype was fabricated using 3D printing with PLA material, and experimental testing confirmed the absence of meshing or interference issues, consistent with simulation results. Through this study, we verified the usefulness of the HTP tooth profile design formula and design tool using the IH tooth profile and cycloid curve, and it is expected that the proposed HTP tooth profile can be utilized as a tooth profile applicable to various reducer designs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering · Iterative Learning Control Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
Bucheon Techno Park 401-402, 655 Pyeongcheon-ro, Wonmi-gu, Bucheon-si 14502, Gyeonggi-do, Republic of Korea
Department of Mechanical & Automotive Engineering, Hanyang Cyber University, Seoul 04763, Republic of Korea
Funding
Korea Planning & Evaluation Institute of Industrial Technology (KEIT) · Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea
References (26)
Show source-provided references
1. A design of speed reducer with trapezoidal tooth profile for robot manipulator10.1007/s12206-010-1112-y ↗
2. Tooth modification and dynamic performance of the cycloidal drive10.1016/j.ymssp.2016.09.029 ↗
3. Geometry design and dynamic analysis of a modified cycloid reducer with epitrochoid tooth profile10.1016/j.mechmachtheory.2021.104399 ↗
4. Li, T., An, X., Deng, X., Li, J., and Li, Y. (2020). A new tooth profile modification method of cycloidal gears in precision reducers for robots. Appl. Sci., 10.10.3390/app10041266 ↗
5. Thai, N.H., Thom, P.V., and Trung, N.T. (2021). Experimental design and manufacture a pair of the internal non-circular gears with an improved cycloid profile. Regional Conference in Mechanical Manufacturing Engineering, Springer.10.1007/978-981-19-1968-8_11 ↗
6. Traditional versus improved designs for cycloidal speed reducers with a small tooth difference: The effect on dynamics10.1016/j.mechmachtheory.2014.11.013 ↗
7. Modeling and analysis of pure kinematic error in harmonic drive10.1016/j.mechmachtheory.2020.104122 ↗
8. The prediction of the angular transmission error of a harmonic drive by measuring noncontact tooth profile and considering three-dimensional tooth engagement10.1007/s12541-022-00760-w ↗
9. Research on meshing characteristics of strain wave gearing with three different types of tooth profiles10.1007/s12541-021-00575-1 ↗
10. Tang, T., Jia, H., Li, J., Wang, J., and Zeng, X. (2021). Modeling of transmission compliance and hysteresis considering degradation in a harmonic drive. Appl. Sci., 11.10.3390/app11020665 ↗
11. Wang, J., Wan, Z., Dong, Z., and Li, Z. (2020). Research on performance test system of space harmonic reducer in high vacuum and low temperature environment. Machines, 9.10.3390/machines9010001 ↗
12. Research on static and dynamic mechanical characteristics of flexible bearing in harmonic reducer
13. Ishikawa, S. (1967, January 4–8). The gear geometry of tooth engagement in harmonic drive. Proceedings of the JSME Semi-International Symposium, Tokyo, Japan.
14. Ishikawa, S. (1989). Tooth Profile of Spline of Strain Wave Gearing. (No. 4,823,638), U.S. Patent.
15. Performance of a strain wave gearing using a new tooth profile
16. Study on tooth profiles of the harmonic drive10.1115/1.2912570 ↗
17. A novel harmonic drive with pure involute tooth gear pair10.1115/1.1637659 ↗
18. Cao, X., Song, S., Xie, H., and Wang, M. (2018). Design and analysis of double-arc tooth profile harmonic drive. Recent Developments in Mechatronics and Intelligent Robotics: Proceedings of the International Conference on Mechatronics and Intelligent Robotics (ICMIR2017)–Volume 2, Springer International Publishing.10.1007/978-3-319-70990-1_4 ↗
19. Yu, Z., and Ting, K.-L. (2014, January 25–28). Explicit dynamics analysis for harmonic drives. Proceedings of the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, New York, NY, USA.10.1115/DETC2014-34759 ↗
20. Li, Y., Zhang, N., Zhang, Y., and Dai, B. (2019, January 12–15). New Design Method for Flexspline Tooth Profile of Harmonic Drive Considering Deformation. Proceedings of the 2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA), Tokyo, Japan.10.1109/IEA.2019.8714865 ↗
21. A novel harmonic drive with the full conjugate tooth profile10.1177/09544062241262654 ↗
22. Investigation on high contact ratio harmonic two-dimensional tooth profile design based on mid-point meshing method10.1007/s12206-023-0126-1 ↗
23. Juvinall, R.C., and Marshek, K.M. (1991). Fundamentals of Machine Component Design, John Wiley & Sons. [2nd ed.].10.1115/1.2899687 ↗
24. Jeon, H.-S. (1998). Study on the Flexspline for Harmonic Drive of Robots. [Ph.D. Thesis, Chung-Ang University].
25. Ishikawa, S. (1996). Tertiary Negative-Deviation Flexing Contact Type Gear Drive of Non-Profile-Shifted Tooth Profile. (No. 5,458,756), U.S. Patent.
26. Murayama, Y. (2023). Method for Designing Tooth Profile of Wave Gear Device. (10-2023-0147738), Korean Patent.