journal article·2025-06-03Open access

Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive

Shibo Mu, Xingwei Sun, Zhixu Dong, Heran Yang, Yin Liu, Weifeng Zhang, Sheng Qu, Hongxun Zhao, Yaping Zhao

Applied Sciences· Volume 15· Issue 11

Abstract

This study proposes the use of Physics-Informed Neural Networks (PINNs) to further advance the curvature interference analysis method. The nonlinear equation system encountered in determining the curvature interference limit line is embedded into the PINN loss function, thereby enabling the solution of high-dimensional, nonlinear equations. Computational results demonstrate that the PINN model achieves a solution accuracy on the order of 10−13 when solving multidimensional nonlinear systems, which is comparable to the classical Fsolve algorithm. The curvature interference analysis reveals the presence of two curvature interference boundary lines, although they rarely extend to the worm gear tooth surface. A study on the influence of design parameters on the interference boundaries indicates that the axial installation distance has the greatest impact. Inadequate axial spacing causes the interference limit line to shift toward the inner end of the worm gear, significantly increasing the risk of interference in that region. The proposed curvature interference analysis method based on PINNs can be extended to other types of gear drives. It also lays the foundation for future work on establishing both forward and inverse mappings between design parameters and curvature interference using PINNs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Iterative Learning Control Systems · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870, China

School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China

Funding

National Natural Science Foundation of China · Project of the Science and Technology Innovation Team of Liaoning Provincial Department of Education · Basic Research Projects of Higher Colleges and Universities of Liaoning Provincial Department of Education · Liaoning Province Science and Technology Plan Joint Program · Support Program for Young and Middle-aged Talents in Science and Technology Innovation in Shenyang · Liaoning Huanghai Laboratory Open Innovation Fund · Liaoning Province Natural Science Foundation

References (32)

Show source-provided references
1. Litvin, F.L., and Fuentes, A. (2004). Gear Geometry and Applied Theory, Cambridge University Press. [2nd ed.].10.1017/CBO9780511547126 ↗
2. Wu, D., and Luo, J. (1985). Theory of Gearing, Science Press.
3. Dong, X. (1989). Foundation of Meshing Theory for Gear Drives, China Machine Press.
4. Wu, X. (2009). Meshing Theory of Gear, Xi’an Jiaotong University Press. [2nd ed.].
5. Determination of envelope to family of planar parametric curves and envelope singularities10.1016/S0045-7825(98)00367-3 ↗
6. Formation by branches of envelope to parametric families of surfaces and curves10.1016/S0045-7825(00)00334-0 ↗
7. Dong, X. (2004). Design and Modification of Hourglass Worm Drives, China Machine Press.
8. New method for determining singularities on enveloped surface and its application to study curvature interference theory of involute worm drive10.1177/16878140211038086 ↗
9. Geometry and investigation of Klingelnberg-type worm gear drive10.1115/1.2359477 ↗
10. Study on the influence of gear hobbing and shaft misalignments on the geometric interference of cylindrical worm gear set10.1177/0954406216671543 ↗
11. Wang, D.Y., Zhang, L.H., Tian, C., Miao, J.C., An, L.Q., Shi, J., and Chen, B.K. (2024). Mathematical model and analysis of novel bevel gear with high load-capacity based on the geometric elements. Mathematics, 12.10.3390/math12091373 ↗
12. Active design method and performance prediction of internal gear pairs with low sliding ratio10.1007/s11012-024-01845-8 ↗
13. A new multi-DOF envelope forming process for fabricating spiral bevel gears with back taper tooth10.1016/j.cja.2024.09.015 ↗
14. Undercutting mechanism of worm wheel in offsetting normal arc-toothed cylindrical worm drive10.1007/s11771-025-5878-6 ↗
15. Application of machine learning for film thickness prediction in elliptical EHL contact with varying entrainment angle10.1016/j.triboint.2024.109940 ↗
16. The influence of worm gear material and lubricant on the efficiency and coefficient of friction10.46793/tribomat.2024.001 ↗
17. Tuninetti, V., Forcael, D., Valenzuela, M., Martínez, A., Ávila, A., Medina, C., Pincheira, G., Salas, A., Oñate, A., and Duchêne, L. (2024). Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling. Materials, 17.10.3390/ma17020317 ↗
18. Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations10.1016/j.jcp.2018.10.045 ↗
19. Physics-informed neural network for quadrotor dynamical modeling10.1016/j.robot.2023.104569 ↗
20. HomPINNs: Homotopy physics-informed neural networks for solving the inverse problems of nonlinear differential equations with multiple solutions10.1016/j.jcp.2023.112751 ↗
21. Innovative fault diagnosis for axial piston pumps: A physics-informed neural network framework predicting pump flow ripple10.1016/j.ymssp.2024.112274 ↗
22. A physics-informed deep neural network based beam vibration framework for simulation and parameter identification10.1016/j.engappai.2024.109804 ↗
23. Physics-informed neural network for lithium-ion battery degradation stable modeling and prognosis10.1038/s41467-024-48779-z ↗
24. Contributions of core, mantle and climatological processes to Earth’s polar motion10.1038/s41561-024-01478-2 ↗
25. Residual-connected physics-informed neural network for anti-noise wind field reconstruction10.1016/j.apenergy.2023.122439 ↗
26. Meshing theory of point-contact conical-envelope cylindrical worm-face worm gear drive10.1016/j.mechmachtheory.2024.105870 ↗
27. Chen, Y., Pu, Y., and Chen, Y.H. (2025). Study on the Wear Performance of Spiroid Worm Drive with Steel-Steel Meshing. Machines, 13.10.3390/machines13030205 ↗
28. Investigation of non-linear dynamic characteristics of a point-contact spiroid worm drive generated by two-generating-surface method10.1016/j.jsv.2024.118805 ↗
29. Chen, W. (2018). Differential Geometry, Peking University Press. [2nd ed.].
30. Zhao, Y. (2023). Engineering Differential Geometry of Curves and Surfaces, Science Press.
31. Meshing theory of offsetting Archimedes cylindrical worm drive10.1080/15397734.2022.2102994 ↗
32. Editorial Committee of Gear Handbook (2004). Gear Handbook, Machine Press.